component
MCP4652T-502E
Public Made by Adomby adom
Microchip Tech Digital Potentiometers, DFN-10-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/mcp4652t-502e
3f51a0c
MCP4652T-502E
Microchip Tech · Digital Potentiometers · DFN-10-EP(3x3)
MCP4652T-502E from Microchip Tech, in a DFN-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | HVC/A0 | input | High-voltage command / address bit 0 input with internal 'smart' VDD pull-up; state is latched at POR/BOR; tolerates up to 12.5 V (VIHH) to enable high-voltage serial commands; VIH ≥ 0.45 VDD for VDD 2.7-5.5 V. |
| 2 | SCL | input | I2C serial clock input, slave-only (no clock stretching); supports standard (100 kHz), fast (400 kHz), and high-speed (3.4 MHz) modes; VIH ≥ 0.7 VDD. |
| 3 | SDA | bidirectional | I2C serial data open-drain N-channel I/O; SDA must be stable while SCL is HIGH; VOL ≤ 0.4 V at IOL = 3 mA (VDD ≥ 2.0 V). |
| 4 | VSS | power_in | Ground reference; maximum current out of VSS pin is 100 mA. |
| 5 | P1B | passive | Resistor network 1 Terminal B (zero-scale end); voltage range VSS to VDD; maximum terminal current ±2.5 mA; disconnectable via TCON register bit R1B. |
| 6 | P1W | passive | Resistor network 1 wiper (adjustable terminal); wiper resistance typically 75 Ω (max 160 Ω) at VDD = 5.5 V, IW = 2.0 mA, code = 00h; voltage range VSS to VDD. |
| 7 | P0W | passive | Resistor network 0 wiper (adjustable terminal); wiper resistance typically 75 Ω (max 160 Ω) at VDD = 5.5 V, IW = 2.0 mA, code = 00h; voltage range VSS to VDD. |
| 8 | P0B | passive | Resistor network 0 Terminal B (zero-scale end); voltage range VSS to VDD; maximum terminal current ±2.5 mA; disconnectable via TCON register bit R0B. |
| 9 | A1 | input | I2C address bit 1 input with internal 'smart' pull-up; must be tied statically to VDD or VSS; VIH ≥ 0.45 VDD; supports up to 4 MCP46X2 devices on one I2C bus together with A0. |
| 10 | VDD | power_in | Positive power supply input; 2.7 V to 5.5 V for full electrical specifications, 1.8 V to 5.5 V for serial interface operation only; decouple with 0.1 µF to VSS placed within 4 mm of pin. |
| 11 | EP | passive | Exposed thermal pad on bottom of package, conductively connected to die substrate; must be left unconnected or tied to the same potential as VSS; may be used as PCB heat sink connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | DFN-10-EP(3x3) |
| Category | Data Acquisition |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
MCP4652T-502E - Footprint:
Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm - 3D model: DFN-10-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
mcp4652t-502e-etched.step/mcp4652t-502e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp4652t-502e.step/mcp4652t-502e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (102 pp, sha256
ee77464c39584a73, retrieved 2026-09-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP4652T-502E
**Microchip Tech** · Digital Potentiometers · DFN-10-EP(3x3)
MCP4652T-502E from Microchip Tech, in a DFN-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | HVC/A0 | input | High-voltage command / address bit 0 input with internal 'smart' VDD pull-up; state is latched at POR/BOR; tolerates up to 12.5 V (VIHH) to enable high-voltage serial commands; VIH ≥ 0.45 VDD for VDD 2.7-5.5 V. |
| 2 | SCL | input | I2C serial clock input, slave-only (no clock stretching); supports standard (100 kHz), fast (400 kHz), and high-speed (3.4 MHz) modes; VIH ≥ 0.7 VDD. |
| 3 | SDA | bidirectional | I2C serial data open-drain N-channel I/O; SDA must be stable while SCL is HIGH; VOL ≤ 0.4 V at IOL = 3 mA (VDD ≥ 2.0 V). |
| 4 | VSS | power_in | Ground reference; maximum current out of VSS pin is 100 mA. |
| 5 | P1B | passive | Resistor network 1 Terminal B (zero-scale end); voltage range VSS to VDD; maximum terminal current ±2.5 mA; disconnectable via TCON register bit R1B. |
| 6 | P1W | passive | Resistor network 1 wiper (adjustable terminal); wiper resistance typically 75 Ω (max 160 Ω) at VDD = 5.5 V, IW = 2.0 mA, code = 00h; voltage range VSS to VDD. |
| 7 | P0W | passive | Resistor network 0 wiper (adjustable terminal); wiper resistance typically 75 Ω (max 160 Ω) at VDD = 5.5 V, IW = 2.0 mA, code = 00h; voltage range VSS to VDD. |
| 8 | P0B | passive | Resistor network 0 Terminal B (zero-scale end); voltage range VSS to VDD; maximum terminal current ±2.5 mA; disconnectable via TCON register bit R0B. |
| 9 | A1 | input | I2C address bit 1 input with internal 'smart' pull-up; must be tied statically to VDD or VSS; VIH ≥ 0.45 VDD; supports up to 4 MCP46X2 devices on one I2C bus together with A0. |
| 10 | VDD | power_in | Positive power supply input; 2.7 V to 5.5 V for full electrical specifications, 1.8 V to 5.5 V for serial interface operation only; decouple with 0.1 µF to VSS placed within 4 mm of pin. |
| 11 | EP | passive | Exposed thermal pad on bottom of package, conductively connected to die substrate; must be left unconnected or tied to the same potential as VSS; may be used as PCB heat sink connection. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | DFN-10-EP(3x3) |
| Category | Data Acquisition |
| Pins | 11 |
## CAD (KiCad official)
- Symbol: `MCP4652T-502E`
- Footprint: `Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm`
- 3D model: DFN-10-EP(3x3) (KiCad packages3D, STEP)
- 3D model files: `mcp4652t-502e-etched.step` / `mcp4652t-502e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp4652t-502e.step` / `mcp4652t-502e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589794355784683520) (102 pp, sha256 `ee77464c39584a73`, retrieved 2026-09-22, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp4652t-502e-datasheet.pdf)