component
MCP4541-103E
Public Made by Adomby adom
Microchip Tech Digital Potentiometers, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
MCP4541-103E
Microchip Tech · Digital Potentiometers · MSOP-8
MCP4541-103E from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | HVC/A0 | input | Address 0 input for the I2C interface and High Voltage Command pin; A0 is latched at POR/BOR, and the pin is a High Voltage command input when driven to VIHH. |
| 2 | SCL | input | I2C serial clock input that accepts only external clock signals because the device is a slave. |
| 3 | SDA | bidirectional | I2C serial data I/O pin implemented as an open-drain N-channel driver. |
| 4 | VSS | power_in | Device ground reference; the voltage on the potentiometer terminals must be between VSS and VDD. |
| 5 | P0A | passive | Potentiometer 0 terminal A, connected to the full-scale wiper value (0x80 for 7-bit devices); the voltage must be between VSS and VDD and it can carry positive or negative current. |
| 6 | P0W | passive | Potentiometer 0 wiper terminal; the voltage must be between VSS and VDD and it can carry positive or negative current. |
| 7 | P0B | passive | Potentiometer 0 terminal B, the fixed connection to the zero-scale wiper value (0x00); the voltage must be between VSS and VDD and it can carry positive or negative current. |
| 8 | VDD | power_in | Positive power supply input relative to VSS; below Vmin (2.7V) the electrical performance may not meet the data sheet specifications. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Data Acquisition |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| RAB end-to-end resistance (-103 device) | RAB | 8 | 10 | 12 | kΩ | -103 devices (Note 1) | 5 |
| RAB resistance tolerance | -20 | 20 | % | Resistance (± 20%), -103 devices | 5 | ||
| Supply voltage | VDD | 2.7 | 5.5 | V | 4 | ||
| Operating temperature range | TA | -40 | 125 | °C | 17 | ||
| HVC pin voltage range | VHV | 12.5 | V | VDD ≥ 4.5V | 4 | ||
| VDD start voltage to ensure wiper reset (BOR) | VBOR | 1.65 | V | RAM retention voltage (VRAM) < VBOR | 4 | ||
| Delay after device exits reset state | TBORD | 10 | 20 | µs | Delay after device exits the reset state (VDD > VBOR) | 4 | |
| Supply current, serial interface active at 3.4 MHz | IDD | 600 | µA | Serial Interface Active, HVC/A0 = VIH (or VIL) (Note 11), Write all 0’s to Volatile Wiper 0, VDD = 5.5V, FSCL = 3.4 MHz | 4 | ||
| Supply current, serial interface active at 100 kHz | 250 | µA | Serial Interface Active, HVC/A0 = VIH (or VIL) (Note 11), Write all 0’s to Volatile Wiper 0, VDD = 5.5V, FSCL = 100 kHz | 4 | |||
| EE write current (write cycle) | 575 | µA | EE Write Current (Write Cycle) (Nonvolatile device only), VDD = 5.5V, FSCL = 400 kHz, Write all 0’s to Nonvolatile Wiper 0, SCL = VIL or VIH | 4 | |||
| Serial interface inactive current | 2.5 | 5 | µA | Serial Interface Inactive, (Stop condition, SCL = SDA = VIH), Wiper = 0, VDD = 5.5V, HVC/A0 = VIH | 4 | ||
| Wiper resistance | RW | 75 | 160 | Ω | VDD = 5.5 V, IW = 2.0 mA, code = 00h | 5 | |
| Wiper resistance | RW | 75 | 300 | Ω | VDD = 2.7 V, IW = 2.0 mA, code = 00h | 5 | |
| Full-scale error (10 k, 7-bit) | VWFSE | -2 | -0.1 | LSb | 10 k 7-bit 3.0V ≤ VDD ≤ 5.5V | 7 | |
| Zero-scale error (10 k, 7-bit) | VWZSE | 0.1 | 2 | LSb | 10 k 7-bit 3.0V ≤ VDD ≤ 5.5V | 7 | |
| Potentiometer integral non-linearity | INL | -0.5 | 0.25 | 0.5 | LSb | 7-bit | 7 |
| Potentiometer differential non-linearity | DNL | -0.25 | 0.125 | 0.25 | LSb | 7-bit | 7 |
| Rheostat integral non-linearity (10 k, 7-bit) | R-INL | -1.125 | 0.5 | 1.125 | LSb | 7-bit, 5.5V, IW = 450 µA | 9 |
| Rheostat integral non-linearity (10 k, 7-bit) | R-INL | -4 | 2.5 | 4 | LSb | 7-bit, 3.0V, IW = 240 µA (Note 7) | 9 |
| Rheostat differential non-linearity (10 k, 7-bit) | R-DNL | -0.375 | 0.25 | 0.375 | LSb | 7-bit, 5.5V, IW = 450 µA | 10 |
| Rheostat differential non-linearity (10 k, 7-bit) | R-DNL | -0.75 | 0.5 | 0.75 | LSb | 7-bit, 3.0V, IW = 240 µA (Note 7) | 10 |
| Maximum current through terminal A | IT | 2.5 | mA | Terminal A IAW, W = Full-Scale (FS) | 6 | ||
| Maximum current through terminal B | 2.5 | mA | Terminal B IBW, W = Zero Scale (ZS) | 6 | |||
| Maximum current through terminal W | 2.5 | mA | Terminal W IAW or IBW, W = FS or ZS | 6 | |||
| Maximum current terminal A to B (RAB min 8000) | IAB | 0.688 | mA | IAB, VB = 0V, VA = 5.5V, RAB(MIN) = 8000 | 6 | ||
| High-voltage input entry voltage (WiperLock) | VIHHEN | 8.5 | 12.5 | V | Threshold for WiperLock™ Technology | 11 | |
| High-voltage limit | VMAX | 12.5 | V | Pin can tolerate VMAX or less. | 11 | ||
| Output low voltage (SDA) | VOL | 0.4 | V | VDD ≥ 2.0V, IOL = 3 mA | 12 | ||
| Weak pull-up / pull-down current | IPU | 1.75 | mA | Internal VDD pull-up, VIHH pull-down, VDD = 5.5V, VIHH = 12.5V | 12 | ||
| Input leakage current | IIL | -1 | 1 | µA | VIN = VDD and VIN = VSS | 12 | |
| EEPROM programming write cycle time | tWC | 5 | 10 | ms | 12 | ||
| Voltage on VDD with respect to VSS | -0.6 | 7 | V | 3 | |||
| Voltage on HVC/A0, A1, A2, SCL, SDA and WP with respect to VSS | -0.6 | 12.5 | V | 3 | |||
| Voltage on all other pins (PxA, PxW, PxB) with respect to VSS | -0.3 | V | Upper limit printed as VDD + 0.3V | 3 | |||
| Input clamp current | IIK | -20 | 20 | mA | VI < 0, VI > VDD, VI > VPP ON HV pins | 3 | |
| Output clamp current | IOK | -20 | 20 | mA | VO < 0 or VO > VDD | 3 | |
| Maximum output current sunk by any output pin | 25 | mA | 3 | ||||
| Maximum output current sourced by any output pin | 25 | mA | 3 | ||||
| Maximum current out of VSS pin | 100 | mA | 3 | ||||
| Maximum current into VDD pin | 100 | mA | 3 | ||||
| Maximum current into PXA, PXW and PXB pins | -2.5 | 2.5 | mA | 3 | |||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Ambient temperature with power applied | -40 | 125 | °C | 3 | |||
| Soldering temperature of leads | 300 | °C | 10 seconds | 3 | |||
| Maximum junction temperature | TJ | 150 | °C | 3 | |||
| I2C clock frequency, standard mode | FSCL | 0 | 100 | kHz | Cb = 400 pF, 1.8V - 5.5V | 13 | |
| I2C clock frequency, fast mode | FSCL | 0 | 400 | kHz | Cb = 400 pF, 2.7V - 5.5V | 13 | |
| I2C clock frequency, high-speed 1.7 MHz | FSCL | 0 | 1.7 | MHz | Cb = 400 pF, 4.5V - 5.5V | 13 | |
| I2C clock frequency, high-speed 3.4 MHz | FSCL | 0 | 3.4 | MHz | Cb = 100 pF, 4.5V - 5.5V | 13 | |
| Nominal resistance tempco | RAB/T | 50 | ppm/°C | TA = -20°C to +70°C | 5 | ||
| Nominal resistance tempco | RAB/T | 100 | ppm/°C | TA = -40°C to +85°C | 5 | ||
| Nominal resistance tempco | RAB/T | 150 | ppm/°C | TA = -40°C to +125°C | 5 | ||
| Ratiometric tempco | VWB/T | 15 | ppm/°C | Code = Mid-scale (80h or 40h) | 5 | ||
| Thermal resistance, 8L-MSOP | JA | 211 | °C/W | 17 |
CAD (KiCad official)
- Symbol:
MCP4541-103E - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
mcp4541-103e-etched.step/mcp4541-103e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp4541-103e.step/mcp4541-103e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (102 pp, sha256
ad484e84f5bc6a00, retrieved 2026-10-20, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP4541-103E
**Microchip Tech** · Digital Potentiometers · MSOP-8
MCP4541-103E from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | HVC/A0 | input | Address 0 input for the I2C interface and High Voltage Command pin; A0 is latched at POR/BOR, and the pin is a High Voltage command input when driven to VIHH. |
| 2 | SCL | input | I2C serial clock input that accepts only external clock signals because the device is a slave. |
| 3 | SDA | bidirectional | I2C serial data I/O pin implemented as an open-drain N-channel driver. |
| 4 | VSS | power_in | Device ground reference; the voltage on the potentiometer terminals must be between VSS and VDD. |
| 5 | P0A | passive | Potentiometer 0 terminal A, connected to the full-scale wiper value (0x80 for 7-bit devices); the voltage must be between VSS and VDD and it can carry positive or negative current. |
| 6 | P0W | passive | Potentiometer 0 wiper terminal; the voltage must be between VSS and VDD and it can carry positive or negative current. |
| 7 | P0B | passive | Potentiometer 0 terminal B, the fixed connection to the zero-scale wiper value (0x00); the voltage must be between VSS and VDD and it can carry positive or negative current. |
| 8 | VDD | power_in | Positive power supply input relative to VSS; below Vmin (2.7V) the electrical performance may not meet the data sheet specifications. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Data Acquisition |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| RAB end-to-end resistance (-103 device) | RAB | 8 | 10 | 12 | kΩ | -103 devices (Note 1) | 5 |
| RAB resistance tolerance | | -20 | | 20 | % | Resistance (± 20%), -103 devices | 5 |
| Supply voltage | VDD | 2.7 | | 5.5 | V | | 4 |
| Operating temperature range | TA | -40 | | 125 | °C | | 17 |
| HVC pin voltage range | VHV | | | 12.5 | V | VDD ≥ 4.5V | 4 |
| VDD start voltage to ensure wiper reset (BOR) | VBOR | | | 1.65 | V | RAM retention voltage (VRAM) < VBOR | 4 |
| Delay after device exits reset state | TBORD | | 10 | 20 | µs | Delay after device exits the reset state (VDD > VBOR) | 4 |
| Supply current, serial interface active at 3.4 MHz | IDD | | | 600 | µA | Serial Interface Active, HVC/A0 = VIH (or VIL) (Note 11), Write all 0’s to Volatile Wiper 0, VDD = 5.5V, FSCL = 3.4 MHz | 4 |
| Supply current, serial interface active at 100 kHz | | | | 250 | µA | Serial Interface Active, HVC/A0 = VIH (or VIL) (Note 11), Write all 0’s to Volatile Wiper 0, VDD = 5.5V, FSCL = 100 kHz | 4 |
| EE write current (write cycle) | | | | 575 | µA | EE Write Current (Write Cycle) (Nonvolatile device only), VDD = 5.5V, FSCL = 400 kHz, Write all 0’s to Nonvolatile Wiper 0, SCL = VIL or VIH | 4 |
| Serial interface inactive current | | | 2.5 | 5 | µA | Serial Interface Inactive, (Stop condition, SCL = SDA = VIH), Wiper = 0, VDD = 5.5V, HVC/A0 = VIH | 4 |
| Wiper resistance | RW | | 75 | 160 | Ω | VDD = 5.5 V, IW = 2.0 mA, code = 00h | 5 |
| Wiper resistance | RW | | 75 | 300 | Ω | VDD = 2.7 V, IW = 2.0 mA, code = 00h | 5 |
| Full-scale error (10 k, 7-bit) | VWFSE | -2 | -0.1 | | LSb | 10 k 7-bit 3.0V ≤ VDD ≤ 5.5V | 7 |
| Zero-scale error (10 k, 7-bit) | VWZSE | | 0.1 | 2 | LSb | 10 k 7-bit 3.0V ≤ VDD ≤ 5.5V | 7 |
| Potentiometer integral non-linearity | INL | -0.5 | 0.25 | 0.5 | LSb | 7-bit | 7 |
| Potentiometer differential non-linearity | DNL | -0.25 | 0.125 | 0.25 | LSb | 7-bit | 7 |
| Rheostat integral non-linearity (10 k, 7-bit) | R-INL | -1.125 | 0.5 | 1.125 | LSb | 7-bit, 5.5V, IW = 450 µA | 9 |
| Rheostat integral non-linearity (10 k, 7-bit) | R-INL | -4 | 2.5 | 4 | LSb | 7-bit, 3.0V, IW = 240 µA (Note 7) | 9 |
| Rheostat differential non-linearity (10 k, 7-bit) | R-DNL | -0.375 | 0.25 | 0.375 | LSb | 7-bit, 5.5V, IW = 450 µA | 10 |
| Rheostat differential non-linearity (10 k, 7-bit) | R-DNL | -0.75 | 0.5 | 0.75 | LSb | 7-bit, 3.0V, IW = 240 µA (Note 7) | 10 |
| Maximum current through terminal A | IT | | | 2.5 | mA | Terminal A IAW, W = Full-Scale (FS) | 6 |
| Maximum current through terminal B | | | | 2.5 | mA | Terminal B IBW, W = Zero Scale (ZS) | 6 |
| Maximum current through terminal W | | | | 2.5 | mA | Terminal W IAW or IBW, W = FS or ZS | 6 |
| Maximum current terminal A to B (RAB min 8000) | IAB | | | 0.688 | mA | IAB, VB = 0V, VA = 5.5V, RAB(MIN) = 8000 | 6 |
| High-voltage input entry voltage (WiperLock) | VIHHEN | 8.5 | | 12.5 | V | Threshold for WiperLock™ Technology | 11 |
| High-voltage limit | VMAX | | | 12.5 | V | Pin can tolerate VMAX or less. | 11 |
| Output low voltage (SDA) | VOL | | | 0.4 | V | VDD ≥ 2.0V, IOL = 3 mA | 12 |
| Weak pull-up / pull-down current | IPU | | | 1.75 | mA | Internal VDD pull-up, VIHH pull-down, VDD = 5.5V, VIHH = 12.5V | 12 |
| Input leakage current | IIL | -1 | | 1 | µA | VIN = VDD and VIN = VSS | 12 |
| EEPROM programming write cycle time | tWC | | 5 | 10 | ms | | 12 |
| Voltage on VDD with respect to VSS | | -0.6 | | 7 | V | | 3 |
| Voltage on HVC/A0, A1, A2, SCL, SDA and WP with respect to VSS | | -0.6 | | 12.5 | V | | 3 |
| Voltage on all other pins (PxA, PxW, PxB) with respect to VSS | | -0.3 | | | V | Upper limit printed as VDD + 0.3V | 3 |
| Input clamp current | IIK | -20 | | 20 | mA | VI < 0, VI > VDD, VI > VPP ON HV pins | 3 |
| Output clamp current | IOK | -20 | | 20 | mA | VO < 0 or VO > VDD | 3 |
| Maximum output current sunk by any output pin | | | | 25 | mA | | 3 |
| Maximum output current sourced by any output pin | | | | 25 | mA | | 3 |
| Maximum current out of VSS pin | | | | 100 | mA | | 3 |
| Maximum current into VDD pin | | | | 100 | mA | | 3 |
| Maximum current into PXA, PXW and PXB pins | | -2.5 | | 2.5 | mA | | 3 |
| Storage temperature | | -65 | | 150 | °C | | 3 |
| Ambient temperature with power applied | | -40 | | 125 | °C | | 3 |
| Soldering temperature of leads | | | | 300 | °C | 10 seconds | 3 |
| Maximum junction temperature | TJ | | | 150 | °C | | 3 |
| I2C clock frequency, standard mode | FSCL | 0 | | 100 | kHz | Cb = 400 pF, 1.8V - 5.5V | 13 |
| I2C clock frequency, fast mode | FSCL | 0 | | 400 | kHz | Cb = 400 pF, 2.7V - 5.5V | 13 |
| I2C clock frequency, high-speed 1.7 MHz | FSCL | 0 | | 1.7 | MHz | Cb = 400 pF, 4.5V - 5.5V | 13 |
| I2C clock frequency, high-speed 3.4 MHz | FSCL | 0 | | 3.4 | MHz | Cb = 100 pF, 4.5V - 5.5V | 13 |
| Nominal resistance tempco | RAB/T | | 50 | | ppm/°C | TA = -20°C to +70°C | 5 |
| Nominal resistance tempco | RAB/T | | 100 | | ppm/°C | TA = -40°C to +85°C | 5 |
| Nominal resistance tempco | RAB/T | | 150 | | ppm/°C | TA = -40°C to +125°C | 5 |
| Ratiometric tempco | VWB/T | | 15 | | ppm/°C | Code = Mid-scale (80h or 40h) | 5 |
| Thermal resistance, 8L-MSOP | JA | | 211 | | °C/W | | 17 |
## CAD (KiCad official)
- Symbol: `MCP4541-103E`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `mcp4541-103e-etched.step` / `mcp4541-103e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp4541-103e.step` / `mcp4541-103e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588882333100990464) (102 pp, sha256 `ad484e84f5bc6a00`, retrieved 2026-10-20, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp4541-103e-datasheet.pdf)