MCP4361-103E

{
  "schema_version": 1,
  "type": "component",
  "slug": "mcp4361-103e",
  "title": "MCP4361-103E",
  "brief": "Microchip Tech Digital Potentiometers, QFN-20-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "adc-dac-data conversion",
    "mcp4361-103e",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "MCP4361-103E",
    "manufacturer": "Microchip Tech",
    "package": "QFN-20-EP(4x4)",
    "pin_count": 21,
    "category": "ADC/DAC/Data Conversion",
    "subcategory": "Digital Potentiometers",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/22f918cc0c9eb0a5b4a49233dfe372be.pdf",
    "parts": {
      "symbol": "mcp4361-103e.kicad_sym",
      "footprint": "mcp4361-103e.kicad_mod",
      "model_3d": "mcp4361-103e-hero.glb",
      "model_3d_plain": "mcp4361-103e-etched.glb",
      "model_3d_step": "mcp4361-103e-etched.step",
      "model_3d_step_plain": "mcp4361-103e.step",
      "lbr": "mcp4361-103e.lbr"
    },
    "distributor_links": {
      "lcsc": "C637727"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T21:06:19Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "P3B",
        "type": "passive",
        "description": "Potentiometer 3 Terminal B, the zero-scale (wiper 0x00) connection, which must be held between VSS and VDD."
      },
      {
        "number": "2",
        "name": "CS",
        "type": "input",
        "description": "SPI chip select input, high-voltage tolerant with Schmitt trigger; VIL enables serial commands and VIHH enables high-voltage serial commands."
      },
      {
        "number": "3",
        "name": "SCK",
        "type": "input",
        "description": "SPI clock input, high-voltage tolerant with Schmitt trigger."
      },
      {
        "number": "4",
        "name": "SDI",
        "type": "input",
        "description": "SPI serial data input, high-voltage tolerant with Schmitt trigger, connected to the host controller's SDO."
      },
      {
        "number": "5",
        "name": "VSS",
        "type": "power_in",
        "description": "Device ground reference."
      },
      {
        "number": "6",
        "name": "P1B",
        "type": "passive",
        "description": "Potentiometer 1 Terminal B, the zero-scale connection, which must be held between VSS and VDD."
      },
      {
        "number": "7",
        "name": "P1W",
        "type": "passive",
        "description": "Potentiometer 1 wiper terminal, which must be held between VSS and VDD."
      },
      {
        "number": "8",
        "name": "P1A",
        "type": "passive",
        "description": "Potentiometer 1 Terminal A, the full-scale connection, which must be held between VSS and VDD."
      },
      {
        "number": "9",
        "name": "P0A",
        "type": "passive",
        "description": "Potentiometer 0 Terminal A, the full-scale connection, which must be held between VSS and VDD."
      },
      {
        "number": "10",
        "name": "P0W",
        "type": "passive",
        "description": "Potentiometer 0 wiper terminal, which must be held between VSS and VDD."
      },
      {
        "number": "11",
        "name": "P0B",
        "type": "passive",
        "description": "Potentiometer 0 Terminal B, the zero-scale connection, which must be held between VSS and VDD."
      },
      {
        "number": "12",
        "name": "WP",
        "type": "input",
        "description": "Hardware EEPROM write protect input that forces the non-volatile memory to be write protected; it has a smart pull-up that shuts off when the pin is forced low."
      },
      {
        "number": "13",
        "name": "RESET",
        "type": "input",
        "description": "Hardware reset input, high-voltage tolerant with Schmitt trigger and weak pull-up, that forces the device into the POR/BOR state."
      },
      {
        "number": "14",
        "name": "SDO",
        "type": "output",
        "description": "SPI serial data output, connected to the host controller's SDI, used to read registers or monitor the command error bit."
      },
      {
        "number": "15",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive power supply input relative to VSS; device operates from 1.8V to 5.5V, with specifications guaranteed from 2.7V to 5.5V."
      },
      {
        "number": "16",
        "name": "P2B",
        "type": "passive",
        "description": "Potentiometer 2 Terminal B, the zero-scale connection, which must be held between VSS and VDD."
      },
      {
        "number": "17",
        "name": "P2W",
        "type": "passive",
        "description": "Potentiometer 2 wiper terminal, which must be held between VSS and VDD."
      },
      {
        "number": "18",
        "name": "P2A",
        "type": "passive",
        "description": "Potentiometer 2 Terminal A, the full-scale connection, which must be held between VSS and VDD."
      },
      {
        "number": "19",
        "name": "P3A",
        "type": "passive",
        "description": "Potentiometer 3 Terminal A, the full-scale connection, which must be held between VSS and VDD."
      },
      {
        "number": "20",
        "name": "P3W",
        "type": "passive",
        "description": "Potentiometer 3 wiper terminal, which must be held between VSS and VDD."
      },
      {
        "number": "21",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad connected to the die substrate; tie to the same potential as VSS or leave unconnected, and it can serve as a heat sink."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The MPN 'MCP4361-103E' has no package suffix (the datasheet uses /ML for QFN and /ST for TSSOP). The; The EP type is a judgment call. The datasheet says to tie it to VSS potential or leave it unconnecte; The Table 3-1 column headers were garbled in extraction. The QFN column was taken as the last of the"
        ],
        "pages_sent": 17,
        "cost_usd": 0.1468,
        "at": "2026-10-30T21:06:11"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/22f918cc0c9eb0a5b4a49233dfe372be.pdf",
        "pages": 80,
        "sha256": "4c13d6e29f4050bf",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 21,
        "described": 21,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mcp4361-103e.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "c9476a1612023de37f27b4972110ab6ac6dc0eaf5ac48957a2e1c497650082a5",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mcp4361-103e-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "934f279e6ec675f5bb5fa20b8493a44325e23ce3e841ebc9c0de6023cc5d9406",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Microchip Tech",
      "Package": "QFN-20-EP(4x4)",
      "Category": "ADC/DAC/Data Conversion",
      "Pins": "21"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "4c13d6e29f4050bfdad965812fe3623b84ff6fdb4de80b54cf29eef1000c4928",
      "rows": [
        {
          "name": "Resistance RAB (-103 devices)",
          "symbol": "RAB",
          "kind": "tolerance",
          "unit": "kΩ",
          "min": 8,
          "typ": 10,
          "max": 12,
          "conditions": "-103 devices (Note 1), ±20%",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Supply Voltage",
          "symbol": "VDD",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 2.7,
          "typ": null,
          "max": 5.5,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Supply Voltage (serial interface only)",
          "symbol": "VDD",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.8,
          "typ": null,
          "max": 2.7,
          "conditions": "Serial Interface only.",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Operating Temperature",
          "symbol": "TA",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 125,
          "conditions": "",
          "source_page": 15,
          "source": "datasheet"
        },
        {
          "name": "VDD Start Voltage to ensure Wiper Reset",
          "symbol": "VBOR",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 1.65,
          "conditions": "RAM retention voltage (VRAM) < VBOR",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Delay after device exits reset state",
          "symbol": "TBORD",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": 10,
          "max": 20,
          "conditions": "(VDD > VBOR)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Supply Current, serial interface active",
          "symbol": "IDD",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": null,
          "max": 450,
          "conditions": "VDD = 5.5V, CS = VIL, SCK @ 5 MHz, write all 0's to volatile Wiper 0 (address 0h)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Supply Current, EE write",
          "symbol": "IDD",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 1,
          "conditions": "EE Write Current, VDD = 5.5V, CS = VIL, SCK @ 5 MHz, write all 0's to non-volatile Wiper 0 (address 2h)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Supply Current, serial interface inactive",
          "symbol": "IDD",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 2.5,
          "max": 5,
          "conditions": "Serial Interface Inactive, CS = VIH, VDD = 5.5V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Supply Current, high-voltage decrement",
          "symbol": "IDD",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 0.55,
          "max": 1,
          "conditions": "Serial Interface Active, VDD = 5.5V, CS = VIHH, SCK @ 5 MHz, decrement non-volatile Wiper 0 (address 2h)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Wiper Resistance 5.5V",
          "symbol": "RW",
          "kind": "electrical",
          "unit": "Ω",
          "min": null,
          "typ": 75,
          "max": 160,
          "conditions": "VDD = 5.5 V, IW = 2.0 mA, code = 00h",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Wiper Resistance 2.7V",
          "symbol": "RW",
          "kind": "electrical",
          "unit": "Ω",
          "min": null,
          "typ": 75,
          "max": 300,
          "conditions": "VDD = 2.7 V, IW = 2.0 mA, code = 00h",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Nominal Resistance Tempco",
          "symbol": "ΔRAB/ΔT",
          "kind": "temperature_coefficient",
          "unit": "ppm/°C",
          "min": null,
          "typ": 50,
          "max": null,
          "conditions": "TA = -20°C to +70°C",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Nominal Resistance Tempco",
          "symbol": "ΔRAB/ΔT",
          "kind": "temperature_coefficient",
          "unit": "ppm/°C",
          "min": null,
          "typ": 100,
          "max": null,
          "conditions": "TA = -40°C to +85°C",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Nominal Resistance Tempco",
          "symbol": "ΔRAB/ΔT",
          "kind": "temperature_coefficient",
          "unit": "ppm/°C",
          "min": null,
          "typ": 150,
          "max": null,
          "conditions": "TA = -40°C to +125°C",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Ratiometric Tempco",
          "symbol": "ΔVWB/ΔT",
          "kind": "temperature_coefficient",
          "unit": "ppm/°C",
          "min": null,
          "typ": 15,
          "max": null,
          "conditions": "Code = Midscale (80h or 40h)",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Resistor Terminal Input Voltage Range",
          "symbol": "VA,VW,VB",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 0,
          "typ": null,
          "max": 5.5,
          "conditions": "Vss to VDD; Note 5, Note 6",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Maximum current through A, W or B",
          "symbol": "IW",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 2.5,
          "conditions": "Note 6, Worst case current through wiper when wiper is either Full Scale or Zero Scale.",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Full Scale Error 10 kΩ 8-bit",
          "symbol": "VWFSE",
          "kind": "electrical",
          "unit": "LSb",
          "min": -3.5,
          "typ": -0.1,
          "max": null,
          "conditions": "10 kΩ 8-bit 3.0V ≤ VDD ≤ 5.5V",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Zero Scale Error 10 kΩ 8-bit",
          "symbol": "VWZSE",
          "kind": "electrical",
          "unit": "LSb",
          "min": null,
          "typ": 0.1,
          "max": 3.5,
          "conditions": "10 kΩ 8-bit 3.0V ≤ VDD ≤ 5.5V",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Potentiometer INL 8-bit",
          "symbol": "INL",
          "kind": "electrical",
          "unit": "LSb",
          "min": -1,
          "typ": 0.5,
          "max": 1,
          "conditions": "8-bit 3.0V ≤ VDD ≤ 5.5V, MCP43X1 devices only (Note 2)",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Potentiometer DNL 8-bit",
          "symbol": "DNL",
          "kind": "electrical",
          "unit": "LSb",
          "min": -0.5,
          "typ": 0.25,
          "max": 0.5,
          "conditions": "8-bit 3.0V ≤ VDD ≤ 5.5V, MCP43X1 devices only (Note 2)",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Bandwidth -3 dB 10 kΩ 8-bit",
          "symbol": "BW",
          "kind": "electrical",
          "unit": "MHz",
          "min": null,
          "typ": 1,
          "max": null,
          "conditions": "10 kΩ 8-bit Code = 80h",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Rheostat INL 10 kΩ 8-bit 5.5V",
          "symbol": "R-INL",
          "kind": "electrical",
          "unit": "LSb",
          "min": -1.5,
          "typ": 0.5,
          "max": 1.5,
          "conditions": "10 kΩ 8-bit 5.5V, IW = 450 µA",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Rheostat INL 10 kΩ 8-bit 3.0V",
          "symbol": "R-INL",
          "kind": "electrical",
          "unit": "LSb",
          "min": -5.5,
          "typ": 2.5,
          "max": 5.5,
          "conditions": "10 kΩ 8-bit 3.0V, IW = 240 µA (Note 7)",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Rheostat DNL 10 kΩ 8-bit 5.5V",
          "symbol": "R-DNL",
          "kind": "electrical",
          "unit": "LSb",
          "min": -0.5,
          "typ": 0.25,
          "max": 0.5,
          "conditions": "10 kΩ 8-bit 5.5V, IW = 450 µA",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Rheostat DNL 10 kΩ 8-bit 3.0V",
          "symbol": "R-DNL",
          "kind": "electrical",
          "unit": "LSb",
          "min": -1,
          "typ": 0.25,
          "max": 1,
          "conditions": "10 kΩ 8-bit 3.0V (Note 7)",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Capacitance (PA)",
          "symbol": "CAW",
          "kind": "electrical",
          "unit": "pF",
          "min": null,
          "typ": 75,
          "max": null,
          "conditions": "f =1 MHz, Code = Full Scale",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Capacitance (PW)",
          "symbol": "CW",
          "kind": "electrical",
          "unit": "pF",
          "min": null,
          "typ": 120,
          "max": null,
          "conditions": "f =1 MHz, Code = Full Scale",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Capacitance (PB)",
          "symbol": "CBW",
          "kind": "electrical",
          "unit": "pF",
          "min": null,
          "typ": 75,
          "max": null,
          "conditions": "f =1 MHz, Code = Full Scale",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Schmitt Trigger High Input Threshold",
          "symbol": "VIH",
          "kind": "electrical",
          "unit": "V",
          "min": 0.45,
          "typ": null,
          "max": null,
          "conditions": "2.7V ≤ VDD ≤ 5.5V; min is 0.45 VDD",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Schmitt Trigger Low Input Threshold",
          "symbol": "VIL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.2,
          "conditions": "max is 0.2VDD",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "High Voltage Input Entry Voltage",
          "symbol": "VIHH",
          "kind": "electrical",
          "unit": "V",
          "min": 8.5,
          "typ": null,
          "max": 12.5,
          "conditions": "Threshold for WiperLock Technology (Note 6)",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "High Voltage Limit",
          "symbol": "VMAX",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 12.5,
          "conditions": "Pin can tolerate VMAX or less. (Note 6)",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Output Low Voltage (SDO)",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": 0,
          "typ": null,
          "max": 0.3,
          "conditions": "IOL = 5 mA, VDD = 5.5V; max is 0.3VDD",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Output High Voltage (SDO)",
          "symbol": "VOH",
          "kind": "electrical",
          "unit": "V",
          "min": 0.7,
          "typ": null,
          "max": null,
          "conditions": "IOH = -2.5 mA, VDD = 5.5V; min is 0.7VDD",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Weak Pull-up Current",
          "symbol": "IPU",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 1.75,
          "conditions": "Internal VDD pull-up, VIHH pull-down, VDD = 5.5V, VCS = 12.5V",
          "source_page": 11,
          "source": "datasheet"
        },
        {
          "name": "Input Leakage Current",
          "symbol": "IIL",
          "kind": "electrical",
          "unit": "µA",
          "min": -1,
          "typ": null,
          "max": 1,
          "conditions": "VIN = VDD (all pins) and VIN = VSS (all pins except RESET)",
          "source_page": 11,
          "source": "datasheet"
        },
        {
          "name": "EEPROM Programming Write Cycle Time",
          "symbol": "tWC",
          "kind": "timing",
          "unit": "ms",
          "min": null,
          "typ": 3,
          "max": 10,
          "conditions": "",
          "source_page": 11,
          "source": "datasheet"
        },
        {
          "name": "Power Supply Sensitivity 8-bit",
          "symbol": "PSS",
          "kind": "electrical",
          "unit": "%/%",
          "min": null,
          "typ": 0.0015,
          "max": 0.0035,
          "conditions": "8-bit VDD = 2.7V to 5.5V, VA = 2.7V, Code = 80h",
          "source_page": 11,
          "source": "datasheet"
        },
        {
          "name": "RESET pulse width",
          "symbol": "tRST",
          "kind": "timing",
          "unit": "ns",
          "min": 50,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 12,
          "source": "datasheet"
        },
        {
          "name": "SCK Input Frequency",
          "symbol": "FSCK",
          "kind": "timing",
          "unit": "MHz",
          "min": null,
          "typ": null,
          "max": 10,
          "conditions": "VDD = 2.7V to 5.5V",
          "source_page": 13,
          "source": "datasheet"
        },
        {
          "name": "SCK input high time",
          "symbol": "TscH",
          "kind": "timing",
          "unit": "ns",
          "min": 45,
          "typ": null,
          "max": null,
          "conditions": "VDD = 2.7V to 5.5V",
          "source_page": 13,
          "source": "datasheet"
        },
        {
          "name": "SCK input low time",
          "symbol": "TscL",
          "kind": "timing",
          "unit": "ns",
          "min": 45,
          "typ": null,
          "max": null,
          "conditions": "VDD = 2.7V to 5.5V",
          "source_page": 13,
          "source": "datasheet"
        },
        {
          "name": "SDO data output valid after SCK falling edge",
          "symbol": "TscL2DOV",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 70,
          "conditions": "VDD = 2.7V to 5.5V",
          "source_page": 13,
          "source": "datasheet"
        },
        {
          "name": "Voltage on VDD with respect to VSS",
          "symbol": "VDD",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.6,
          "typ": null,
          "max": 7,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Voltage on CS, SCK, SDI, WP, RESET",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.6,
          "typ": null,
          "max": 12.5,
          "conditions": "with respect to VSS",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Voltage on PxA, PxW, PxB, SDO",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": null,
          "conditions": "-0.3V to VDD + 0.3V with respect to VSS",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Maximum current into PXA, PXW & PXB pins",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": -2.5,
          "typ": null,
          "max": 2.5,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Storage temperature",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -65,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Maximum Junction Temperature",
          "symbol": "TJ",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Thermal Resistance, 20L-QFN",
          "symbol": "θJA",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 43,
          "max": null,
          "conditions": "",
          "source_page": 15,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "mcp4361-103e"
  ],
  "discovery_pitch": "MCP4361-103E (Microchip Tech) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mcp4361-103e.kicad_sym",
    "mcp4361-103e.kicad_mod",
    "mcp4361-103e.glb",
    "mcp4361-103e.step",
    "mcp4361-103e.lbr",
    "docs/hero.png",
    "docs/mcp4361-103e-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mcp4361-103e-hero.glb",
    "mcp4361-103e-hero.overlay.json",
    "mcp4361-103e-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}