main
Ray mcp3911a0t-e: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 8f8f6db
{
  "slug": "mcp3911a0t-e",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Tech Analog Front End (AFE), SSOP-20-208mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "data acquisition",
    "mcp3911a0t-e",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mcp3911a0t-e.kicad_sym",
    "mcp3911a0t-e.kicad_mod",
    "mcp3911a0t-e.glb",
    "mcp3911a0t-e.step",
    "mcp3911a0t-e.lbr",
    "docs/hero.png",
    "docs/mcp3911a0t-e-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "MCP3911A0T-E",
    "manufacturer": "Microchip Tech",
    "package": "SSOP-20-208mil",
    "pin_count": 20,
    "category": "Data Acquisition",
    "subcategory": "Analog Front End (AFE)",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589804985229090816",
    "parts": {
      "symbol": "mcp3911a0t-e.kicad_sym",
      "footprint": "mcp3911a0t-e.kicad_mod",
      "model_3d": "mcp3911a0t-e-etched.glb",
      "model_3d_plain": "mcp3911a0t-e.glb",
      "model_3d_step": "mcp3911a0t-e-etched.step",
      "model_3d_step_plain": "mcp3911a0t-e.step",
      "lbr": "mcp3911a0t-e.lbr"
    },
    "distributor_links": {
      "lcsc": "C629450"
    },
    "pins": [
      {
        "number": "1",
        "name": "RESET",
        "type": "input",
        "description": "Active-low master reset input; places chip in reset state when driven low and clears all internal registers to default values."
      },
      {
        "number": "2",
        "name": "DVDD",
        "type": "power_in",
        "description": "Digital power supply pin for internal digital circuitry; requires 2.7V to 3.6V with bypass capacitors."
      },
      {
        "number": "3",
        "name": "AVDD",
        "type": "power_in",
        "description": "Analog power supply pin for internal analog circuitry; requires 2.7V to 3.6V with bypass capacitors."
      },
      {
        "number": "4",
        "name": "CH0+",
        "type": "input",
        "description": "Noninverting analog input for Channel 0 ADC; accepts ±1V maximum without distortion relative to AGND in normal operation."
      },
      {
        "number": "5",
        "name": "CH0-",
        "type": "input",
        "description": "Inverting analog input for Channel 0 ADC; accepts ±1V maximum without distortion relative to AGND in normal operation."
      },
      {
        "number": "6",
        "name": "CH1-",
        "type": "input",
        "description": "Inverting analog input for Channel 1 ADC; accepts ±1V maximum without distortion relative to AGND in normal operation."
      },
      {
        "number": "7",
        "name": "CH1+",
        "type": "input",
        "description": "Noninverting analog input for Channel 1 ADC; accepts ±1V maximum without distortion relative to AGND in normal operation."
      },
      {
        "number": "8",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground connection for return path of internal analog circuitry; must be connected to DGND at a star point for optimal accuracy."
      },
      {
        "number": "9",
        "name": "REFIN+/OUT",
        "type": "bidirectional",
        "description": "Noninverting voltage reference input and internal reference output pin; outputs 1.2V internal reference when VREFEXT=0 or accepts external differential reference when VREFEXT=1."
      },
      {
        "number": "10",
        "name": "REFIN-",
        "type": "input",
        "description": "Inverting voltage reference input pin; connects to AGND for internal reference operation or to external VREF- for differential external reference."
      },
      {
        "number": "11",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital ground connection for return path of internal digital circuitry; must be connected to AGND at a star point for optimal noise performance."
      },
      {
        "number": "12",
        "name": "MDAT1",
        "type": "output",
        "description": "Modulator data output pin for Channel 1; outputs modulator bit stream at AMCLK rate when MODOUT[1] bit is enabled in STATUSCOM register."
      },
      {
        "number": "13",
        "name": "MDAT0",
        "type": "output",
        "description": "Modulator data output pin for Channel 0; outputs modulator bit stream at AMCLK rate when MODOUT[0] bit is enabled in STATUSCOM register."
      },
      {
        "number": "14",
        "name": "DR",
        "type": "output",
        "description": "Data ready output pin; outputs active-low pulse with period equal to DRCLK and width equal to one DMCLK period to signal new ADC conversion ready."
      },
      {
        "number": "15",
        "name": "OSC1/CLKI",
        "type": "input",
        "description": "Oscillator crystal connection or external clock input pin; accepts 1-20 MHz crystal oscillator or external clock depending on CLKEXT bit setting."
      },
      {
        "number": "16",
        "name": "OSC2",
        "type": "passive",
        "description": "Oscillator crystal connection pin; connects to load capacitor for crystal oscillator operation or grounded when CLKEXT=1 for external clock mode."
      },
      {
        "number": "17",
        "name": "CS",
        "type": "input",
        "description": "Serial interface chip select pin; active-low input that enables SPI communication when pulled low; rising edge terminates communication."
      },
      {
        "number": "18",
        "name": "SCK",
        "type": "input",
        "description": "Serial interface clock input pin; provides clock for SPI communication with maximum frequency of 20 MHz; compatible with SPI Modes 0,0 and 1,1."
      },
      {
        "number": "19",
        "name": "SDO",
        "type": "output",
        "description": "Serial interface data output pin; outputs ADC conversion data and register values on falling edge of SCK during SPI read operations."
      },
      {
        "number": "20",
        "name": "SDI",
        "type": "input",
        "description": "Serial interface data input pin; accepts command bytes and configuration data on rising edge of SCK during SPI write operations."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 74,
        "cost_usd": 0.6336,
        "at": "2026-09-21T16:46:34"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589804985229090816",
        "pages": 74,
        "sha256": "6aa4f0fb7c0af6d5",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mcp3911a0t-e.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          7.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c9a01a276d0b4d9561efd58f2fcee56f52c1b6ab464ea7a0380cab4e87a924e6",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mcp3911a0t-e-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          7.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "74e85ee198536692022ca1083ab3b8831af8303840e2910c907e05925a5106f8",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}