main
Ray Publish 0.1.0 66caab6
{
  "slug": "mcp3561-e",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Tech Analog To Digital Converters (ADCs), TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "data converters",
    "mcp3561-e",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mcp3561-e.kicad_sym",
    "mcp3561-e.kicad_mod",
    "mcp3561-e.glb",
    "mcp3561-e.step",
    "mcp3561-e.lbr",
    "docs/hero.png",
    "docs/mcp3561-e-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mcp3561-e-hero.glb",
    "mcp3561-e-hero.overlay.json",
    "mcp3561-e-etched.glb"
  ],
  "component": {
    "mpn": "MCP3561-E",
    "manufacturer": "Microchip Tech",
    "package": "TSSOP-20",
    "pin_count": 20,
    "category": "Data Converters",
    "subcategory": "Analog To Digital Converters (ADCs)",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/df58e398198b9f88972a9486654a0495.pdf",
    "parts": {
      "symbol": "mcp3561-e.kicad_sym",
      "footprint": "mcp3561-e.kicad_mod",
      "model_3d": "mcp3561-e-hero.glb",
      "model_3d_plain": "mcp3561-e-etched.glb",
      "model_3d_step": "mcp3561-e-etched.step",
      "model_3d_step_plain": "mcp3561-e.step",
      "lbr": "mcp3561-e.lbr"
    },
    "distributor_links": {
      "lcsc": "C1012815"
    },
    "distributor_check": {
      "checked_at": "2026-10-24T04:39:44Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "AVDD",
        "type": "power_in",
        "description": "Analog supply pin, to be kept within the Electrical Characteristics range of 2.7 V to 3.6 V, with a 10 µF ceramic in parallel with a 0.1 µF ceramic recommended for bypass."
      },
      {
        "number": "2",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground, to be connected to the same ground as DGND (preferably star connection) and not internally connected to DGND."
      },
      {
        "number": "3",
        "name": "REFIN-",
        "type": "input",
        "description": "Inverting differential reference input (VREF-); tie to AGND for single-ended reference use, and keep 0.6 V ≤ VREF ≤ AVDD."
      },
      {
        "number": "4",
        "name": "REFIN+",
        "type": "input",
        "description": "Noninverting differential reference input (VREF+); must satisfy 0.6 V ≤ VREF ≤ AVDD, with 0.1 µF and 10 µF bypass to AGND recommended."
      },
      {
        "number": "5",
        "name": "CH0",
        "type": "input",
        "description": "Analog input 0, selectable as VIN+ or VIN- by the multiplexer; pin voltage must stay between AGND - 0.1 V and VDD + 0.1 V."
      },
      {
        "number": "6",
        "name": "CH1",
        "type": "input",
        "description": "Analog input 1, selectable as VIN+ or VIN- by the multiplexer; pin voltage must stay between AGND - 0.1 V and VDD + 0.1 V."
      },
      {
        "number": "7",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected for the MCP3561 (no internal function stated)."
      },
      {
        "number": "8",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected for the MCP3561 (no internal function stated)."
      },
      {
        "number": "9",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected for the MCP3561 (no internal function stated)."
      },
      {
        "number": "10",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected for the MCP3561 (no internal function stated)."
      },
      {
        "number": "11",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected for the MCP3561 (no internal function stated)."
      },
      {
        "number": "12",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected for the MCP3561 (no internal function stated)."
      },
      {
        "number": "13",
        "name": "CS",
        "type": "input",
        "description": "SPI chip select (Schmitt-triggered); communication starts on the falling edge and ends on the rising edge, and no communication occurs while high."
      },
      {
        "number": "14",
        "name": "SCK",
        "type": "input",
        "description": "SPI serial clock input (Schmitt-triggered), maximum 20 MHz, with data latched in on the rising edge and clocked out on the falling edge."
      },
      {
        "number": "15",
        "name": "SDI",
        "type": "input",
        "description": "SPI serial data input (Schmitt-triggered), latching data on the SCK rising edge; command byte is clocked in just after CS falls."
      },
      {
        "number": "16",
        "name": "SDO",
        "type": "tri_state",
        "description": "SPI serial data output, clocked out on the SCK falling edge, and high-impedance when CS is high or during write/Fast command periods after the command byte."
      },
      {
        "number": "17",
        "name": "IRQ/MDAT",
        "type": "output",
        "description": "Digital output configured by IRQ_MODE[1] as interrupt output (inactive state high-Z or logic high per IRQ_MODE[0]) or modulator data output; in high-Z mode an external pull-up of about 100-200 kΩ to DVDD is required."
      },
      {
        "number": "18",
        "name": "MCLK",
        "type": "bidirectional",
        "description": "Master clock input for the ADC or analog master clock (AMCLK) output depending on CLK_SEL bits; typical frequency 4.9152 MHz and required continuously during conversions."
      },
      {
        "number": "19",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital ground for internal digital circuitry, to be connected to the same ground as AGND and not internally connected to AGND."
      },
      {
        "number": "20",
        "name": "DVDD",
        "type": "power_in",
        "description": "Digital supply for internal digital circuitry, to be kept within the Electrical Characteristics range of 1.8 V to 3.6 V, with a 10 µF ceramic in parallel with a 0.1 µF ceramic recommended for bypass."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Table 3-1 in the extracted text has interleaved columns for the UQFN and TSSOP NC entries. I assigne; The datasheet excerpt does not give an ordering code for the MCP3561 in the TSSOP package. The only ; Pin descriptions are drawn from Section 3.0 text (pages 24–26) and include the limits stated there. "
        ],
        "pages_sent": 17,
        "cost_usd": 0.0983,
        "at": "2026-10-24T04:39:25"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/df58e398198b9f88972a9486654a0495.pdf",
        "pages": 108,
        "sha256": "c8ad778bd923d8b9",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mcp3561-e.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",
        "checked": "2026-10-24",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mcp3561-e-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4630933a1d5c8d60b37d04074aa5be09accf30d6527f90a2dfc3ce303447fd0a",
        "checked": "2026-10-24",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}