Generated by kicad-footprint-generator · KiCad file format 20260206
MCP3461-E
Microchip Tech · Analog To Digital Converters (ADCs) · TSSOP-20
MCP3461-E from Microchip Tech, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AVDD | power_in | Analog supply voltage pin for the analog circuitry (2.7V to 3.6V), bypassed with typically 10 µF in parallel with 0.1 µF ceramic and monitored by the AVDD POR circuit. |
| 2 | AGND | power_in | Analog ground for internal analog circuitry, must be connected externally to the same ground as DGND (preferably star connection) as it is not connected internally to DGND. |
| 3 | REFIN- | input | Inverting differential reference input (VREF-), connected directly to AGND for single-ended reference applications, with 0.6V ≤ VREF ≤ AVDD. |
| 4 | REFIN+ | input | Noninverting differential reference input (VREF+), with 0.6V ≤ VREF ≤ AVDD and recommended 0.1 µF and 10 µF bypass capacitors to AGND. |
| 5 | CH0 | input | Analog input 0 to the input multiplexer, with absolute voltage range from AGND - 0.1V to VDD + 0.1V. |
| 6 | CH1 | input | Analog input 1 to the input multiplexer, with absolute voltage range from AGND - 0.1V to VDD + 0.1V. |
| 7 | NC | unconnected | Not connected. |
| 8 | NC | unconnected | Not connected. |
| 9 | NC | unconnected | Not connected. |
| 10 | NC | unconnected | Not connected. |
| 11 | NC | unconnected | Not connected. |
| 12 | NC | unconnected | Not connected. |
| 13 | CS | input | Schmitt-trigger SPI chip select input whose falling edge starts and rising edge ends a communication, with no communication possible when high. |
| 14 | SCK | input | Schmitt-trigger SPI serial clock input up to 20 MHz, data clocked in on rising edge and out on falling edge, compatible with SPI modes 0,0 and 1,1. |
| 15 | SDI | input | Schmitt-trigger SPI data input used to send the COMMAND byte after CS falling edge, followed by data words, clocked in on the rising edge of SCK. |
| 16 | SDO | tri_state | SPI data output clocked out on the falling edge of SCK, high-impedance when CS is high, during writes/Fast commands after the COMMAND byte, or when the device address does not match. |
| 17 | IRQ/MDAT | output | Interrupt output or modulator data output selected by IRQ_MODE[1], with inactive state high-Z (needs external pull-up to DVDD, typically 100-200 kΩ) or logic high selected by IRQ_MODE[0]. |
| 18 | MCLK | bidirectional | Master clock input or AMCLK analog master clock output depending on CLK_SEL[1:0], with typical clock frequency of 4.9152 MHz. |
| 19 | DGND | power_in | Ground for internal digital circuitry, must be connected externally to the same ground as AGND, preferably with a star connection. |
| 20 | DVDD | power_in | Digital supply voltage pin (1.8V to 3.6V), bypassed with typically 10 µF in parallel with 0.1 µF ceramic and monitored by the DVDD POR circuit. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TSSOP-20 |
| Category | Data Converters |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage, Analog | AVDD | 2.7 | 3.6 | V | 6 | ||
| Operating Voltage, Digital | DVDD | 1.8 | V | Max printed as AVDD + 0.1; DVDD ≤ 3.6V | 6 | ||
| Operating Current, Analog | AIDD | 0.56 | 0.81 | mA | BOOST[1:0] = 00, 0.5x | 6 | |
| Operating Current, Analog | AIDD | 0.69 | 0.96 | mA | BOOST[1:0] = 01, 0.66x | 6 | |
| Operating Current, Analog | AIDD | 0.93 | 1.3 | mA | BOOST[1:0] = 10, 1x | 6 | |
| Operating Current, Analog | AIDD | 1.65 | 2.2 | mA | BOOST[1:0] = 11, 2x | 6 | |
| Operating Current, Digital | DIDD | 0.25 | 0.37 | mA | Note 8 | 6 | |
| Analog Partial Shutdown Current | AIDDS_PS | 22 | µA | 6 | |||
| Digital Partial Shutdown Current | DIDDS_PS | 158 | µA | 6 | |||
| Analog Full Shutdown Current | AIDDS_FS | 0.83 | µA | CONFIG0 = 0x00, TA = +105°C, MCLK input in Idle mode (Note 2) | 6 | ||
| Analog Full Shutdown Current | AIDDS_FS | 1.1 | µA | CONFIG0 = 0x00, TA = +125°C, MCLK input in Idle mode | 6 | ||
| Digital Full Shutdown Current | DIDDS_FS | 2.4 | µA | CONFIG0 = 0x00, TA = +105°C, MCLK input in Idle mode (Note 2) | 6 | ||
| Digital Full Shutdown Current | DIDDS_FS | 5 | µA | CONFIG0 = 0x00, TA = +125°C, MCLK input in Idle mode | 6 | ||
| Reference Voltage Range (VREF+-VREF-) | VREF | 0.6 | V | Max printed as AVDD | 7 | ||
| Gain Error | GE | -3 | 3 | % | Note 6 | 7 | |
| No Missing Code Resolution | Resolution | 16 | Bits | Note 1 | 7 | ||
| Gain Error Temperature Coefficient | GE_DRIFT | 0.5 | 2 | ppm/oC | GAIN: 1x, 2x, 4x (Note 2) | 7 | |
| Gain Error Temperature Coefficient | GE_DRIFT | 1 | 4 | ppm/oC | GAIN: 8x (Note 2) | 7 | |
| Gain Error Temperature Coefficient | GE_DRIFT | 2 | 8 | ppm/oC | GAIN: 0.33x, 16x (Note 2) | 7 | |
| Integral Nonlinearity | INL | -10 | 10 | ppm FSR | GAIN = 0.33 (Note 2) | 8 | |
| Integral Nonlinearity | INL | -7 | 7 | ppm FSR | GAIN = 1 (Note 2) | 8 | |
| Integral Nonlinearity | INL | -20 | 20 | ppm FSR | GAIN = 8 (Note 2) | 8 | |
| Integral Nonlinearity | INL | -32 | 32 | ppm FSR | GAIN = 16 (Note 2) | 8 | |
| Signal-to-Noise and Distortion Ratio | SINAD | 96.9 | 97.2 | dB | AVDD = DVDD =VREF = 3.3V and TA = +25°C (Note 2) | 8 | |
| Signal-to-Noise Ratio | SNR | 97 | 97.3 | dBc | AVDD = DVDD =VREF = 3.3V and TA = +25°C (Note 2) | 8 | |
| Total Harmonic Distortion | THD | -116 | -110 | dB | AVDD = DVDD =VREF = 3.3V and TA = +25°C. Includes the first 10 harmonics (Note 2) | 8 | |
| Spurious-Free Dynamic Range | SFDR | 110 | 120 | dBc | AVDD = DVDD =VREF = 3.3V and TA = +25°C (Note 2) | 8 | |
| Data Transfer Time to DR | tDODR | 50 | ns | 9 | |||
| Modulator Output Valid from AMCLK High | tDOMDAT | 100 | ns | 2.7V ≤ DVDD ≤ 3.6V | 9 | ||
| Modulator Output Valid from AMCLK High | tDOMDAT | 200 | ns | 1.8V ≤ DVDD ≤ 2.7V | 9 | ||
| Master Clock Input Frequency Range | fMCLK_EXT | 1 | 20 | MHz | DVDD ≥ 2.7V | 9 | |
| Master Clock Input Frequency Range | fMCLK_EXT | 1 | 10 | MHz | DVDD < 2.7V | 9 | |
| Master Clock Input Duty Cycle | fMCLK_DUTY | 45 | 55 | % | 9 | ||
| Internal Master Clock Frequency | fMCLK_INT | 3.3 | 6.6 | MHz | CLK_SEL[1] = 1 | 9 | |
| Data Ready Pulse High Time | TDRH | 16 | DMCLK periods | See Figure 5-15 | 9 | ||
| Scan Mode Time Delay between sampling channels | TDLY_SCAN | 0 | 512 | DMCLK periods | 9 | ||
| Scan Mode Time interval between scan cycles | TTIMER_SCAN | 0 | 1.67772e+07 | DMCLK periods | 9 | ||
| Specified Temperature Range | TA | -40 | 125 | °C | 10 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | 10 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 10 | ||
| Serial Clock Frequency | fSCK | 20 | MHz | DVDD = 2.7V to 3.6V, CLOAD = 30 pF | 10 | ||
| Serial Clock Frequency | fSCK | 10 | MHz | DVDD = 1.8V to 2.7V, CLOAD = 30 pF | 11 | ||
| Input Leakage Current | ILI_D | 1 | µA | Pins configured as inputs or high-impedance outputs | 11 | ||
| DVDD, AVDD supply voltage | DVDD, AVDD | -0.3 | 4 | V | 5 | ||
| Analog Inputs w.r.t. AGND | -0.3 | V | Max printed as AVDD + 0.3V | 5 | |||
| Current at Input Pins | -5 | 5 | mA | Printed ±5 mA | 5 | ||
| Current at Output and Supply Pins | -20 | 20 | mA | Printed ±20 mA | 5 | ||
| Storage Temperature | -65 | 150 | °C | 5 | |||
| Ambient Temperature with Power Applied | -65 | 125 | °C | 5 | |||
| Soldering Temperature of Leads | 300 | °C | 10 seconds | 5 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 5 | |||
| ESD on the Analog Inputs (HBM) | 6 | kV | HBM | 5 | |||
| Thermal Resistance, 20-Lead TSSOP | JA | 44 | °C/W | 10 | |||
| Power-on Reset Threshold Voltage, analog | VPOR_A | 1.75 | V | For analog circuits | 6 | ||
| Power-on Reset Threshold Voltage, digital | VPOR_D | 1.2 | V | For digital circuits | 6 | ||
| Hysteresis of Schmitt Trigger Inputs | VHYS | 200 | mV | 11 |
CAD (KiCad official)
- Symbol:
MCP3461-E - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
mcp3461-e-etched.step/mcp3461-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp3461-e.step/mcp3461-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (108 pp, sha256
c83ec3033af8ff79, retrieved 2026-10-26, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).