MCP2562FD-E/SN - CAN FD Transceiver

{
 "symbolName": "MCP2562FD-E-SN",
 "mpn": "MCP2562FD-E/SN",
 "manufacturer": "Microchip Technology",
 "package": "SOIC-8 (SN, 3.90 mm body)",
 "pinCount": 8,
 "description": "High-speed CAN FD transceiver with VIO pin (1.8 V to 5.5 V I/O), ISO 11898-2/-5, SOIC-8",
 "datasheetUrl": "https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP2561-2FD-High-Speed-CAN-Flexible-Data-Rate-Transceiver-DS20005284.pdf",
 "footprint": "mcp2562fd-e-sn:mcp2562fd-e-sn",
 "reference": "U",
 "distributors": {
  "mouser": "579-MCP2562FD-E/SN",
  "digikey": "MCP2562FD-E/SN-ND",
  "lcsc": "C124016"
 },
 "wikiUrl": "https://wiki.adom.inc/adom/mcp2562fd-e-sn",
 "pinLayout": "left-right",
 "pins": [
  {
   "number": "1",
   "name": "TXD",
   "type": "input",
   "group": "Controller",
   "description": "Transmit data input from the CAN controller. Low drives the bus Dominant, high leaves it Recessive. Internal pull-up (nominal 33 kOhm) to VIO (DS20005284B p.5, 1.7.1)."
  },
  {
   "number": "4",
   "name": "RXD",
   "type": "output",
   "group": "Controller",
   "description": "Receive data output, CMOS push-pull supplied from VIO: high when the bus is Recessive, low when Dominant (p.5, 1.7.4)."
  },
  {
   "number": "8",
   "name": "STBY",
   "type": "input",
   "group": "Controller",
   "description": "Mode select: low = Normal mode, high = Standby (transmitter and high-speed receiver off, low-power wake-up receiver on). Internal MOS pull-up to VIO (p.5, 1.7.9)."
  },
  {
   "number": "7",
   "name": "CANH",
   "type": "bidirectional",
   "group": "CAN bus",
   "description": "CAN high-level bus I/O; disconnected from the bus when the device is unpowered (p.5, 1.7.8)."
  },
  {
   "number": "6",
   "name": "CANL",
   "type": "bidirectional",
   "group": "CAN bus",
   "description": "CAN low-level bus I/O; disconnected from the bus when the device is unpowered (p.5, 1.7.7)."
  },
  {
   "number": "3",
   "name": "VDD",
   "type": "power_in",
   "group": "Power",
   "description": "Supply voltage, 4.5 V to 5.5 V; supplies the transmitter and receivers (p.5, 1.7.3; p.9)."
  },
  {
   "number": "5",
   "name": "VIO",
   "type": "power_in",
   "group": "Power",
   "description": "Digital I/O supply, 1.8 V to 5.5 V; sets the logic level of TXD, RXD and STBY (p.5, 1.7.6; p.9)."
  },
  {
   "number": "2",
   "name": "VSS",
   "type": "power_in",
   "group": "Ground",
   "description": "Ground (p.5, 1.7.2)."
  }
 ],
 "pinDescriptions": {
  "TXD": "Transmit data input from the CAN controller. Low drives the bus Dominant, high leaves it Recessive. Internal pull-up (nominal 33 kOhm) to VIO (DS20005284B p.5, 1.7.1).",
  "RXD": "Receive data output, CMOS push-pull supplied from VIO: high when the bus is Recessive, low when Dominant (p.5, 1.7.4).",
  "STBY": "Mode select: low = Normal mode, high = Standby (transmitter and high-speed receiver off, low-power wake-up receiver on). Internal MOS pull-up to VIO (p.5, 1.7.9).",
  "CANH": "CAN high-level bus I/O; disconnected from the bus when the device is unpowered (p.5, 1.7.8).",
  "CANL": "CAN low-level bus I/O; disconnected from the bus when the device is unpowered (p.5, 1.7.7).",
  "VDD": "Supply voltage, 4.5 V to 5.5 V; supplies the transmitter and receivers (p.5, 1.7.3; p.9).",
  "VIO": "Digital I/O supply, 1.8 V to 5.5 V; sets the logic level of TXD, RXD and STBY (p.5, 1.7.6; p.9).",
  "VSS": "Ground (p.5, 1.7.2)."
 },
 "groupDescriptions": {
  "Controller": "Logic interface to the CAN controller or MCU. TXD and STBY are inputs and RXD is an output, all referenced to VIO, so the transceiver talks directly to 1.8 V to 5.5 V logic.",
  "CAN bus": "Differential CAN bus pair, ISO 11898-2 and ISO 11898-5. Both pins are high impedance when the part is unpowered, so a dead node does not load the bus.",
  "Power": "VDD (4.5 V to 5.5 V) powers the transmitter and receivers; VIO (1.8 V to 5.5 V) powers the digital I/O level shifter. Decouple each with 0.1 uF (Figure 1-2, p.6).",
  "Ground": "VSS, the common ground for VDD and VIO."
 }
}