main
Ray Publish 0.1.0 a106bb8
{
  "slug": "mcp25625t-e-ss",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Tech CAN Transceivers, SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "mcp25625t-e",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mcp25625t-e-ss.kicad_sym",
    "mcp25625t-e-ss.kicad_mod",
    "mcp25625t-e-ss.glb",
    "mcp25625t-e-ss.step",
    "mcp25625t-e-ss.lbr",
    "docs/hero.png",
    "docs/mcp25625t-e-ss-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mcp25625t-e-ss-hero.glb",
    "mcp25625t-e-ss-hero.overlay.json"
  ],
  "component": {
    "mpn": "MCP25625T-E/SS",
    "manufacturer": "Microchip Tech",
    "package": "SSOP-28-208mil",
    "pin_count": 28,
    "category": "Interface",
    "subcategory": "CAN Transceivers",
    "datasheet": "https://ww1.microchip.com/downloads/en/DeviceDoc/MCP25625-CAN-Controller-Data-Sheet-20005282C.pdf",
    "parts": {
      "symbol": "mcp25625t-e-ss.kicad_sym",
      "footprint": "mcp25625t-e-ss.kicad_mod",
      "model_3d": "mcp25625t-e-ss-hero.glb",
      "model_3d_plain": "mcp25625t-e-ss.glb",
      "model_3d_step": "mcp25625t-e-ss-etched.step",
      "model_3d_step_plain": "mcp25625t-e-ss.step",
      "lbr": "mcp25625t-e-ss.lbr"
    },
    "distributor_links": {
      "lcsc": "C628816",
      "digikey": "MCP25625T-E/SSTR-ND",
      "mouser": "579-MCP25625T-E/SS"
    },
    "distributor_check": {
      "checked_at": "2026-11-16T18:49:14Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "MCP25625T-E/SSTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "579-MCP25625T-E/SS",
        "status": "found"
      },
      "matched_as": "MCP25625T-E/SS"
    },
    "pins": [
      {
        "number": "1",
        "name": "VIO",
        "type": "power_in",
        "description": "Digital I/O supply pin for the CAN transceiver; undervoltage threshold is typically 1.2V and the transceiver transfers data to RXD down to 1V on VIO."
      },
      {
        "number": "2",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection."
      },
      {
        "number": "3",
        "name": "CANL",
        "type": "bidirectional",
        "description": "CAN low-level voltage I/O that drives the low side of the differential bus, is tied to the receive comparator, and disconnects from the bus when VDDA is not powered."
      },
      {
        "number": "4",
        "name": "CANH",
        "type": "bidirectional",
        "description": "CAN high-level voltage I/O that drives the high side of the differential bus, is tied to the receive comparator, and disconnects from the bus when VDDA is not powered."
      },
      {
        "number": "5",
        "name": "STBY",
        "type": "input",
        "description": "Standby mode input selecting Normal or Standby mode of the CAN transceiver, with an internal MOS pull-up to VIO (typically 660 kΩ at 5V)."
      },
      {
        "number": "6",
        "name": "Tx1RTS",
        "type": "input",
        "description": "TXB1 request-to-send input, configurable as a general purpose input."
      },
      {
        "number": "7",
        "name": "Tx2RTS",
        "type": "input",
        "description": "TXB2 request-to-send input, configurable as a general purpose input."
      },
      {
        "number": "8",
        "name": "OSC2",
        "type": "output",
        "description": "External oscillator output for the crystal or ceramic resonator; left open when OSC1 is driven by an external clock."
      },
      {
        "number": "9",
        "name": "OSC1",
        "type": "input",
        "description": "External oscillator input for a parallel cut crystal/ceramic resonator or an external clock source."
      },
      {
        "number": "10",
        "name": "GND",
        "type": "power_in",
        "description": "Ground for the CAN controller."
      },
      {
        "number": "11",
        "name": "Rx1BF",
        "type": "output",
        "description": "RxB1 interrupt output, configurable as a digital output via BFPCTRL; high-impedance when its pin function is disabled."
      },
      {
        "number": "12",
        "name": "Rx0BF",
        "type": "output",
        "description": "RxB0 interrupt output, configurable as a digital output via BFPCTRL; high-impedance when its pin function is disabled."
      },
      {
        "number": "13",
        "name": "INT",
        "type": "output",
        "description": "Interrupt output to the microcontroller; interrupts must be cleared through SPI."
      },
      {
        "number": "14",
        "name": "SCK",
        "type": "input",
        "description": "SPI clock input, up to 10 MHz, supporting SPI modes 0,0 and 1,1."
      },
      {
        "number": "15",
        "name": "SI",
        "type": "input",
        "description": "SPI data input."
      },
      {
        "number": "16",
        "name": "SO",
        "type": "output",
        "description": "SPI data output."
      },
      {
        "number": "17",
        "name": "CS",
        "type": "input",
        "description": "SPI chip select input."
      },
      {
        "number": "18",
        "name": "RESET",
        "type": "input",
        "description": "Active-low hardware reset input, which can optionally be pulled up to VDD with a 10 kΩ resistor; must be held low at least 2 µs (tRL) after VDD reaches operating voltage."
      },
      {
        "number": "19",
        "name": "VDD",
        "type": "power_in",
        "description": "Power supply for the CAN controller, 2.7V to 5.5V."
      },
      {
        "number": "20",
        "name": "TxCAN",
        "type": "output",
        "description": "Transmit output from the CAN controller to the CAN transceiver, to be connected externally to TXD."
      },
      {
        "number": "21",
        "name": "RXCAN",
        "type": "input",
        "description": "Receive input to the CAN controller from the CAN transceiver, to be connected externally to RXD."
      },
      {
        "number": "22",
        "name": "CLKOUT",
        "type": "output",
        "description": "Clock output/SOF with prescaler of 1, 2, 4 or 8 (default divide-by-8), high-impedance when disabled, maximum 25 MHz."
      },
      {
        "number": "23",
        "name": "Tx0RTS",
        "type": "input",
        "description": "TXB0 request-to-send input, configurable as a general purpose input."
      },
      {
        "number": "24",
        "name": "TXD",
        "type": "input",
        "description": "Transmit data input of the CAN transceiver from the CAN controller, with an internal pull-up (nominal 33 kΩ) to VIO; low is Dominant, high is Recessive."
      },
      {
        "number": "25",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection."
      },
      {
        "number": "26",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground supply pin of the CAN transceiver."
      },
      {
        "number": "27",
        "name": "VDDA",
        "type": "power_in",
        "description": "Positive supply for the CAN transceiver (transmitter and receiver, including wake-up receiver), 4.5V to 5.5V."
      },
      {
        "number": "28",
        "name": "RXD",
        "type": "output",
        "description": "CMOS receive data output of the CAN transceiver to the CAN controller, supplied by VIO; high when bus is Recessive and low when Dominant."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-opus-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet lists the SSOP-28 body width as 5.30 mm (208 mil) in the marking section. The package ; Pin types for CANH/CANL (HV I/O) were mapped to bidirectional. GND (pin 10) and VSS (pin 26) are sep"
        ],
        "pages_sent": 18,
        "cost_usd": 0.2655,
        "at": "2026-11-16T18:48:55"
      },
      "datasheet": {
        "url": "https://ww1.microchip.com/downloads/en/DeviceDoc/MCP25625-CAN-Controller-Data-Sheet-20005282C.pdf",
        "pages": 90,
        "sha256": "e4fba63531389fbf",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 28,
        "described": 28,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mcp25625t-e-ss.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          10.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",
        "checked": "2026-11-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mcp25625t-e-ss-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          10.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "ca09643940f5a14ca239885fd76e3c70e437defbf7ba1f11c725cbb101c3f574",
        "checked": "2026-11-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}