main
Ray
Publish 0.1.0
4168261
MCP2544WFDT-E
Microchip Tech · CAN Transceivers · SOIC-8
MCP2544WFDT-E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TXD | input | Transmit data input: a low level drives CANH and CANL dominant and a high level lets the bus go recessive, with an internal pull-up of nominal 33 kΩ to VDD on this MCP2544 variant. |
| 2 | VSS | power_in | Ground supply pin. |
| 3 | VDD | power_in | Positive supply voltage pin that supplies the transmitter and receiver, including the wake-up receiver, and also supplies the digital I/O on this variant. |
| 4 | RXD | output | CMOS-compatible receive data output that is high when the CAN bus is recessive and low when dominant, driven from VDD on this variant. |
| 5 | NC | unconnected | No connect; this pin can be left open or connected to VSS. |
| 6 | CANL | bidirectional | CAN low-level voltage I/O that drives the low side of the differential bus and disconnects from the bus when the device is not powered. |
| 7 | CANH | bidirectional | CAN high-level voltage I/O that drives the high side of the differential bus and disconnects from the bus when the device is not powered. |
| 8 | STBY | input | Standby mode input that selects Normal or Standby mode, with an internal MOS pull-up to VDD on this variant (typical 660 kΩ at 5 V, 1.1 MΩ at 3.3 V, 4.4 MΩ at 1.8 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage Range, VDD Pin | VDD | 4.5 | 5.5 | V | 13 | ||
| Supply Current, Recessive | IDD | 2.5 | 5 | mA | Recessive, VTXD = VDD | 13 | |
| Supply Current, Dominant | 55 | 70 | mA | Dominant, VTXD = 0V | 13 | ||
| Standby Current | IDDS | 4 | 15 | µA | MCP2544FD and MCP2544WFDT, bus recessive | 13 | |
| Maximum Supply Current | IDDMAX | 95 | 140 | mA | Fault condition: VTXD = VSS, VCANH = VCANL = -5V to +18V | 13 | |
| High Level of the UV Comparator for VDD | VUVH | 4 | 4.25 | 4.4 | V | 13 | |
| Low Level of the UV Comparator for VDD | VUVL | 3.6 | 3.8 | 4 | V | 13 | |
| CANH: Dominant Output Voltage | VO(D) | 2.75 | 3.5 | 4.5 | V | TXD = 0, RL = 50 to 65 | 14 |
| CANL: Dominant Output Voltage | 0.5 | 1.5 | 2.25 | V | RL = 50 to 65 | 14 | |
| Driver Symmetry | VSYM | 0.9 | 1 | 1.1 | V | 1 MHz square wave, Recessive and Dominant states, and transition | 14 |
| Dominant: Differential Output Voltage | VO(DIFF)(D) | 1.5 | 2 | 3 | V | VTXD = VSS, RL = 50 to 65 | 14 |
| Recessive: Differential Output Voltage, normal | VO(DIFF)(R) | -500 | 0 | 50 | mV | VTXD = VDD, no load, normal | 14 |
| Recessive: Differential Output Voltage, standby | VO(DIFF)(S) | -200 | 0 | 200 | mV | VTXD = VDD, no load, standby | 14 |
| CANH: Short-Circuit Output Current | IO(SC) | -115 | -85 | mA | VTXD = VSS, VCANH = -3V, CANL: floating | 14 | |
| Recessive Differential Input Voltage, normal | VDIFF(R)(I) | -4 | 0.5 | V | Normal mode, -12V < V(CANH, CANL) < +12V | 14 | |
| Dominant Differential Input Voltage, normal | VDIFF(D)(I) | 0.9 | 9 | V | Normal mode, -12V < V(CANH, CANL) < +12V | 15 | |
| Differential Receiver Threshold, normal | VTH(DIFF) | 0.5 | 0.7 | 0.9 | V | Normal mode, -12V < V(CANH, CANL) < +12V | 15 |
| Differential Input Hysteresis | VHYS(DIFF) | 30 | 200 | mV | Normal mode | 15 | |
| Differential Input Resistance | RDIFF | 12 | 25 | 100 | k | 15 | |
| High-Level Input Voltage (TXD, STBY) | VIH | 2 | V | MCP2544FD and MCP2544WFDT | 15 | ||
| Low-Level Input Voltage (TXD, STBY) | VIL | -0.3 | 0.8 | V | MCP2544FD and MCP2544WFDT | 15 | |
| TXD: Low-Level Input Current | IIL(TXD) | -270 | -150 | -30 | µA | 15 | |
| Low-Level Output Voltage (RXD) | VOL | 0.4 | V | IOL = 4 mA, typical 8 mA | 16 | ||
| Shutdown Junction Temperature | TJ(SD) | 165 | 175 | 185 | °C | -12V < V(CANH, CANL) < +12V | 16 |
| Delay TXD Low to Bus Dominant | tTXD-BUSON | 50 | 85 | ns | 17 | ||
| Delay TXD High to Bus Recessive | tTXD-BUSOFF | 40 | 85 | ns | 17 | ||
| Delay Bus Dominant to RXD | tBUSON-RXD | 70 | 85 | ns | 17 | ||
| Delay Bus Recessive to RXD | tBUSOFF-RXD | 110 | 145 | ns | 17 | ||
| Propagation Delay TXD to RXD (worst case) | tTXD, RXD | 90 | 120 | ns | Worst case of tLOOP(R) and tLOOP(F); see Figure 2-10 | 18 | |
| Propagation Delay, Rising Edge | tLOOP(R) | 90 | 120 | ns | 18 | ||
| Propagation Delay, Falling Edge | tLOOP(F) | 80 | 120 | ns | 18 | ||
| Recessive Bit Time on RXD, 1 Mbps | tBIT(RXD), 1M | 900 | 985 | 1100 | ns | tBIT(TXD) = 1000 ns (Figure 2-10) | 18 |
| Recessive Bit Time on RXD, 2 Mbps | tBIT(RXD), 2M | 450 | 490 | 550 | ns | tBIT(TXD) = 500 ns (Figure 2-10) | 18 |
| Recessive Bit Time on RXD, 5 Mbps | tBIT(RXD), 5M | 160 | 190 | 220 | ns | tBIT(TXD) = 200 ns (Figure 2-10) | 18 |
| Recessive Bit Time on RXD, 8 Mbps | tBIT(RXD), 8M | 85 | 100 | 135 | ns | tBIT(TXD) = 120 ns (Figure 2-10) | 18 |
| Transmitted Bit Time on Bus, 1 Mbps | tBIT(BUS), 1M | 870 | 1000 | 1060 | ns | tBIT(TXD) = 1000 ns (Figure 2-10) | 19 |
| Transmitted Bit Time on Bus, 2 Mbps | tBIT(BUS), 2M | 435 | 515 | 530 | ns | tBIT(TXD) = 500 ns (Figure 2-10) | 19 |
| Receiver Timing Symmetry, 1 Mbps | tDIFF(REC), 1M | -65 | 0 | 40 | ns | tBIT(TXD) = 1000 ns (Figure 2-10) | 19 |
| Receiver Timing Symmetry, 2 Mbps | tDIFF(REC), 2M | -65 | 0 | 40 | ns | tBIT(TXD) = 500 ns (Figure 2-10) | 19 |
| Receiver Timing Symmetry, 5 Mbps | tDIFF(REC), 5M | -45 | 0 | 15 | ns | tBIT(TXD) = 200 ns (Figure 2-10) | 19 |
| Receiver Timing Symmetry, 8 Mbps | tDIFF(REC), 8M | -45 | 0 | 10 | ns | tBIT(TXD) = 120 ns (Figure 2-10) | 19 |
| CAN Activity Filter Time (Standby) | tFILTER | 0.5 | 1.7 | 3.6 | µs | VDIFF(D)(I) = 1.2V to 3V | 18 |
| Permanent Dominant Detect Time | tPDT | 0.8 | 1.9 | 5 | ms | TXD = 0V | 18 |
| WUP Time-out | tWAKE(TO) | 1 | 1.9 | 5 | ms | Figure 2-11 | 19 |
| Supply Voltage VDD | VDD | 7 | V | 12 | |||
| DC Voltage at TXD, RXD, STBY and VSS | -0.3 | V | 12 | ||||
| DC Voltage at CANH and CANL | -58 | 58 | V | 12 | |||
| Transient Voltage on CANH and CANL | -150 | 100 | V | ISO-7637 (Figure 2-5) | 12 | ||
| Differential Bus Input Voltage (continuous) | VDIFF(I) | -5 | 10 | V | t = 60 days, continuous | 12 | |
| Differential Bus Input Voltage (pulses) | VDIFF(I) | 17 | V | 1000 pulses, t = 0.1 ms, VCANH = +18V | 12 | ||
| Storage Temperature | -55 | 150 | °C | 12 | |||
| Operating Ambient Temperature | -40 | 150 | °C | 12 | |||
| Virtual Junction Temperature | TVJ | -40 | 190 | °C | IEC 60747-1 | 12 | |
| Soldering Temperature of Leads | 300 | °C | 10 seconds | 12 | |||
| ESD Protection on CANH and CANL Pins | -13 | 13 | kV | IEC 61000-4-2 | 12 | ||
| ESD Protection on CANH and CANL Pins (Human Body Model) | -8 | 8 | kV | IEC 801; Human Body Model | 12 | ||
| Specified Temperature Range (Extended, E grade) | TA | -40 | 125 | C | 23 | ||
| Operating Temperature Range | TA | -40 | 150 | C | 23 | ||
| Storage Temperature Range (thermal table) | TA | -65 | 155 | C | 23 | ||
| Thermal Resistance, 8-Lead SOIC | JA | 149.5 | C/W | 23 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 32 |
CAD (KiCad official)
- Symbol:
MCP2544WFDT-E - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mcp2544wfdt-e-etched.step/mcp2544wfdt-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp2544wfdt-e.step/mcp2544wfdt-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (44 pp, sha256
484a6f42b22dcf87, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP2544WFDT-E
**Microchip Tech** · CAN Transceivers · SOIC-8
MCP2544WFDT-E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TXD | input | Transmit data input: a low level drives CANH and CANL dominant and a high level lets the bus go recessive, with an internal pull-up of nominal 33 kΩ to VDD on this MCP2544 variant. |
| 2 | VSS | power_in | Ground supply pin. |
| 3 | VDD | power_in | Positive supply voltage pin that supplies the transmitter and receiver, including the wake-up receiver, and also supplies the digital I/O on this variant. |
| 4 | RXD | output | CMOS-compatible receive data output that is high when the CAN bus is recessive and low when dominant, driven from VDD on this variant. |
| 5 | NC | unconnected | No connect; this pin can be left open or connected to VSS. |
| 6 | CANL | bidirectional | CAN low-level voltage I/O that drives the low side of the differential bus and disconnects from the bus when the device is not powered. |
| 7 | CANH | bidirectional | CAN high-level voltage I/O that drives the high side of the differential bus and disconnects from the bus when the device is not powered. |
| 8 | STBY | input | Standby mode input that selects Normal or Standby mode, with an internal MOS pull-up to VDD on this variant (typical 660 kΩ at 5 V, 1.1 MΩ at 3.3 V, 4.4 MΩ at 1.8 V). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage Range, VDD Pin | VDD | 4.5 | | 5.5 | V | | 13 |
| Supply Current, Recessive | IDD | | 2.5 | 5 | mA | Recessive, VTXD = VDD | 13 |
| Supply Current, Dominant | | | 55 | 70 | mA | Dominant, VTXD = 0V | 13 |
| Standby Current | IDDS | | 4 | 15 | µA | MCP2544FD and MCP2544WFDT, bus recessive | 13 |
| Maximum Supply Current | IDDMAX | | 95 | 140 | mA | Fault condition: VTXD = VSS, VCANH = VCANL = -5V to +18V | 13 |
| High Level of the UV Comparator for VDD | VUVH | 4 | 4.25 | 4.4 | V | | 13 |
| Low Level of the UV Comparator for VDD | VUVL | 3.6 | 3.8 | 4 | V | | 13 |
| CANH: Dominant Output Voltage | VO(D) | 2.75 | 3.5 | 4.5 | V | TXD = 0, RL = 50 to 65 | 14 |
| CANL: Dominant Output Voltage | | 0.5 | 1.5 | 2.25 | V | RL = 50 to 65 | 14 |
| Driver Symmetry | VSYM | 0.9 | 1 | 1.1 | V | 1 MHz square wave, Recessive and Dominant states, and transition | 14 |
| Dominant: Differential Output Voltage | VO(DIFF)(D) | 1.5 | 2 | 3 | V | VTXD = VSS, RL = 50 to 65 | 14 |
| Recessive: Differential Output Voltage, normal | VO(DIFF)(R) | -500 | 0 | 50 | mV | VTXD = VDD, no load, normal | 14 |
| Recessive: Differential Output Voltage, standby | VO(DIFF)(S) | -200 | 0 | 200 | mV | VTXD = VDD, no load, standby | 14 |
| CANH: Short-Circuit Output Current | IO(SC) | -115 | -85 | | mA | VTXD = VSS, VCANH = -3V, CANL: floating | 14 |
| Recessive Differential Input Voltage, normal | VDIFF(R)(I) | -4 | | 0.5 | V | Normal mode, -12V < V(CANH, CANL) < +12V | 14 |
| Dominant Differential Input Voltage, normal | VDIFF(D)(I) | 0.9 | | 9 | V | Normal mode, -12V < V(CANH, CANL) < +12V | 15 |
| Differential Receiver Threshold, normal | VTH(DIFF) | 0.5 | 0.7 | 0.9 | V | Normal mode, -12V < V(CANH, CANL) < +12V | 15 |
| Differential Input Hysteresis | VHYS(DIFF) | 30 | | 200 | mV | Normal mode | 15 |
| Differential Input Resistance | RDIFF | 12 | 25 | 100 | k | | 15 |
| High-Level Input Voltage (TXD, STBY) | VIH | 2 | | | V | MCP2544FD and MCP2544WFDT | 15 |
| Low-Level Input Voltage (TXD, STBY) | VIL | -0.3 | | 0.8 | V | MCP2544FD and MCP2544WFDT | 15 |
| TXD: Low-Level Input Current | IIL(TXD) | -270 | -150 | -30 | µA | | 15 |
| Low-Level Output Voltage (RXD) | VOL | | | 0.4 | V | IOL = 4 mA, typical 8 mA | 16 |
| Shutdown Junction Temperature | TJ(SD) | 165 | 175 | 185 | °C | -12V < V(CANH, CANL) < +12V | 16 |
| Delay TXD Low to Bus Dominant | tTXD-BUSON | | 50 | 85 | ns | | 17 |
| Delay TXD High to Bus Recessive | tTXD-BUSOFF | | 40 | 85 | ns | | 17 |
| Delay Bus Dominant to RXD | tBUSON-RXD | | 70 | 85 | ns | | 17 |
| Delay Bus Recessive to RXD | tBUSOFF-RXD | | 110 | 145 | ns | | 17 |
| Propagation Delay TXD to RXD (worst case) | tTXD, RXD | | 90 | 120 | ns | Worst case of tLOOP(R) and tLOOP(F); see Figure 2-10 | 18 |
| Propagation Delay, Rising Edge | tLOOP(R) | | 90 | 120 | ns | | 18 |
| Propagation Delay, Falling Edge | tLOOP(F) | | 80 | 120 | ns | | 18 |
| Recessive Bit Time on RXD, 1 Mbps | tBIT(RXD), 1M | 900 | 985 | 1100 | ns | tBIT(TXD) = 1000 ns (Figure 2-10) | 18 |
| Recessive Bit Time on RXD, 2 Mbps | tBIT(RXD), 2M | 450 | 490 | 550 | ns | tBIT(TXD) = 500 ns (Figure 2-10) | 18 |
| Recessive Bit Time on RXD, 5 Mbps | tBIT(RXD), 5M | 160 | 190 | 220 | ns | tBIT(TXD) = 200 ns (Figure 2-10) | 18 |
| Recessive Bit Time on RXD, 8 Mbps | tBIT(RXD), 8M | 85 | 100 | 135 | ns | tBIT(TXD) = 120 ns (Figure 2-10) | 18 |
| Transmitted Bit Time on Bus, 1 Mbps | tBIT(BUS), 1M | 870 | 1000 | 1060 | ns | tBIT(TXD) = 1000 ns (Figure 2-10) | 19 |
| Transmitted Bit Time on Bus, 2 Mbps | tBIT(BUS), 2M | 435 | 515 | 530 | ns | tBIT(TXD) = 500 ns (Figure 2-10) | 19 |
| Receiver Timing Symmetry, 1 Mbps | tDIFF(REC), 1M | -65 | 0 | 40 | ns | tBIT(TXD) = 1000 ns (Figure 2-10) | 19 |
| Receiver Timing Symmetry, 2 Mbps | tDIFF(REC), 2M | -65 | 0 | 40 | ns | tBIT(TXD) = 500 ns (Figure 2-10) | 19 |
| Receiver Timing Symmetry, 5 Mbps | tDIFF(REC), 5M | -45 | 0 | 15 | ns | tBIT(TXD) = 200 ns (Figure 2-10) | 19 |
| Receiver Timing Symmetry, 8 Mbps | tDIFF(REC), 8M | -45 | 0 | 10 | ns | tBIT(TXD) = 120 ns (Figure 2-10) | 19 |
| CAN Activity Filter Time (Standby) | tFILTER | 0.5 | 1.7 | 3.6 | µs | VDIFF(D)(I) = 1.2V to 3V | 18 |
| Permanent Dominant Detect Time | tPDT | 0.8 | 1.9 | 5 | ms | TXD = 0V | 18 |
| WUP Time-out | tWAKE(TO) | 1 | 1.9 | 5 | ms | Figure 2-11 | 19 |
| Supply Voltage VDD | VDD | | | 7 | V | | 12 |
| DC Voltage at TXD, RXD, STBY and VSS | | -0.3 | | | V | | 12 |
| DC Voltage at CANH and CANL | | -58 | | 58 | V | | 12 |
| Transient Voltage on CANH and CANL | | -150 | | 100 | V | ISO-7637 (Figure 2-5) | 12 |
| Differential Bus Input Voltage (continuous) | VDIFF(I) | -5 | | 10 | V | t = 60 days, continuous | 12 |
| Differential Bus Input Voltage (pulses) | VDIFF(I) | | | 17 | V | 1000 pulses, t = 0.1 ms, VCANH = +18V | 12 |
| Storage Temperature | | -55 | | 150 | °C | | 12 |
| Operating Ambient Temperature | | -40 | | 150 | °C | | 12 |
| Virtual Junction Temperature | TVJ | -40 | | 190 | °C | IEC 60747-1 | 12 |
| Soldering Temperature of Leads | | | | 300 | °C | 10 seconds | 12 |
| ESD Protection on CANH and CANL Pins | | -13 | | 13 | kV | IEC 61000-4-2 | 12 |
| ESD Protection on CANH and CANL Pins (Human Body Model) | | -8 | | 8 | kV | IEC 801; Human Body Model | 12 |
| Specified Temperature Range (Extended, E grade) | TA | -40 | | 125 | C | | 23 |
| Operating Temperature Range | TA | -40 | | 150 | C | | 23 |
| Storage Temperature Range (thermal table) | TA | -65 | | 155 | C | | 23 |
| Thermal Resistance, 8-Lead SOIC | JA | | 149.5 | | C/W | | 23 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 32 |
## CAD (KiCad official)
- Symbol: `MCP2544WFDT-E`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `mcp2544wfdt-e-etched.step` / `mcp2544wfdt-e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp2544wfdt-e.step` / `mcp2544wfdt-e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590201731864039424) (44 pp, sha256 `484a6f42b22dcf87`, retrieved 2026-10-19, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp2544wfdt-e-datasheet.pdf)