main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mcp2544wfdt-e: viewers · Ray
mcp2544wfdt-e-etched.glb Publish 0.1.0 · Ray
mcp2544wfdt-e-etched.step mcp2544wfdt-e: factory component page (tier=lcsc) · Ray
mcp2544wfdt-e-hero.glb mcp2544wfdt-e: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp2544wfdt-e-hero.overlay.json Publish 0.1.0 · Ray
mcp2544wfdt-e.glb Publish 0.1.0 · Ray
mcp2544wfdt-e.kicad_mod Publish 0.1.0 · Ray
mcp2544wfdt-e.kicad_sym Publish 0.1.0 · Ray
mcp2544wfdt-e.lbr Publish 0.1.0 · Ray
mcp2544wfdt-e.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

MCP2544WFDT-E

Microchip Tech · CAN Transceivers · SOIC-8

MCP2544WFDT-E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 TXD input Transmit data input: a low level drives CANH and CANL dominant and a high level lets the bus go recessive, with an internal pull-up of nominal 33 kΩ to VDD on this MCP2544 variant.
2 VSS power_in Ground supply pin.
3 VDD power_in Positive supply voltage pin that supplies the transmitter and receiver, including the wake-up receiver, and also supplies the digital I/O on this variant.
4 RXD output CMOS-compatible receive data output that is high when the CAN bus is recessive and low when dominant, driven from VDD on this variant.
5 NC unconnected No connect; this pin can be left open or connected to VSS.
6 CANL bidirectional CAN low-level voltage I/O that drives the low side of the differential bus and disconnects from the bus when the device is not powered.
7 CANH bidirectional CAN high-level voltage I/O that drives the high side of the differential bus and disconnects from the bus when the device is not powered.
8 STBY input Standby mode input that selects Normal or Standby mode, with an internal MOS pull-up to VDD on this variant (typical 660 kΩ at 5 V, 1.1 MΩ at 3.3 V, 4.4 MΩ at 1.8 V).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage Range, VDD Pin VDD 4.5 5.5 V 13
Supply Current, Recessive IDD 2.5 5 mA Recessive, VTXD = VDD 13
Supply Current, Dominant 55 70 mA Dominant, VTXD = 0V 13
Standby Current IDDS 4 15 µA MCP2544FD and MCP2544WFDT, bus recessive 13
Maximum Supply Current IDDMAX 95 140 mA Fault condition: VTXD = VSS, VCANH = VCANL = -5V to +18V 13
High Level of the UV Comparator for VDD VUVH 4 4.25 4.4 V 13
Low Level of the UV Comparator for VDD VUVL 3.6 3.8 4 V 13
CANH: Dominant Output Voltage VO(D) 2.75 3.5 4.5 V TXD = 0, RL = 50 to 65 14
CANL: Dominant Output Voltage 0.5 1.5 2.25 V RL = 50 to 65 14
Driver Symmetry VSYM 0.9 1 1.1 V 1 MHz square wave, Recessive and Dominant states, and transition 14
Dominant: Differential Output Voltage VO(DIFF)(D) 1.5 2 3 V VTXD = VSS, RL = 50 to 65 14
Recessive: Differential Output Voltage, normal VO(DIFF)(R) -500 0 50 mV VTXD = VDD, no load, normal 14
Recessive: Differential Output Voltage, standby VO(DIFF)(S) -200 0 200 mV VTXD = VDD, no load, standby 14
CANH: Short-Circuit Output Current IO(SC) -115 -85 mA VTXD = VSS, VCANH = -3V, CANL: floating 14
Recessive Differential Input Voltage, normal VDIFF(R)(I) -4 0.5 V Normal mode, -12V < V(CANH, CANL) < +12V 14
Dominant Differential Input Voltage, normal VDIFF(D)(I) 0.9 9 V Normal mode, -12V < V(CANH, CANL) < +12V 15
Differential Receiver Threshold, normal VTH(DIFF) 0.5 0.7 0.9 V Normal mode, -12V < V(CANH, CANL) < +12V 15
Differential Input Hysteresis VHYS(DIFF) 30 200 mV Normal mode 15
Differential Input Resistance RDIFF 12 25 100 k 15
High-Level Input Voltage (TXD, STBY) VIH 2 V MCP2544FD and MCP2544WFDT 15
Low-Level Input Voltage (TXD, STBY) VIL -0.3 0.8 V MCP2544FD and MCP2544WFDT 15
TXD: Low-Level Input Current IIL(TXD) -270 -150 -30 µA 15
Low-Level Output Voltage (RXD) VOL 0.4 V IOL = 4 mA, typical 8 mA 16
Shutdown Junction Temperature TJ(SD) 165 175 185 °C -12V < V(CANH, CANL) < +12V 16
Delay TXD Low to Bus Dominant tTXD-BUSON 50 85 ns 17
Delay TXD High to Bus Recessive tTXD-BUSOFF 40 85 ns 17
Delay Bus Dominant to RXD tBUSON-RXD 70 85 ns 17
Delay Bus Recessive to RXD tBUSOFF-RXD 110 145 ns 17
Propagation Delay TXD to RXD (worst case) tTXD, RXD 90 120 ns Worst case of tLOOP(R) and tLOOP(F); see Figure 2-10 18
Propagation Delay, Rising Edge tLOOP(R) 90 120 ns 18
Propagation Delay, Falling Edge tLOOP(F) 80 120 ns 18
Recessive Bit Time on RXD, 1 Mbps tBIT(RXD), 1M 900 985 1100 ns tBIT(TXD) = 1000 ns (Figure 2-10) 18
Recessive Bit Time on RXD, 2 Mbps tBIT(RXD), 2M 450 490 550 ns tBIT(TXD) = 500 ns (Figure 2-10) 18
Recessive Bit Time on RXD, 5 Mbps tBIT(RXD), 5M 160 190 220 ns tBIT(TXD) = 200 ns (Figure 2-10) 18
Recessive Bit Time on RXD, 8 Mbps tBIT(RXD), 8M 85 100 135 ns tBIT(TXD) = 120 ns (Figure 2-10) 18
Transmitted Bit Time on Bus, 1 Mbps tBIT(BUS), 1M 870 1000 1060 ns tBIT(TXD) = 1000 ns (Figure 2-10) 19
Transmitted Bit Time on Bus, 2 Mbps tBIT(BUS), 2M 435 515 530 ns tBIT(TXD) = 500 ns (Figure 2-10) 19
Receiver Timing Symmetry, 1 Mbps tDIFF(REC), 1M -65 0 40 ns tBIT(TXD) = 1000 ns (Figure 2-10) 19
Receiver Timing Symmetry, 2 Mbps tDIFF(REC), 2M -65 0 40 ns tBIT(TXD) = 500 ns (Figure 2-10) 19
Receiver Timing Symmetry, 5 Mbps tDIFF(REC), 5M -45 0 15 ns tBIT(TXD) = 200 ns (Figure 2-10) 19
Receiver Timing Symmetry, 8 Mbps tDIFF(REC), 8M -45 0 10 ns tBIT(TXD) = 120 ns (Figure 2-10) 19
CAN Activity Filter Time (Standby) tFILTER 0.5 1.7 3.6 µs VDIFF(D)(I) = 1.2V to 3V 18
Permanent Dominant Detect Time tPDT 0.8 1.9 5 ms TXD = 0V 18
WUP Time-out tWAKE(TO) 1 1.9 5 ms Figure 2-11 19
Supply Voltage VDD VDD 7 V 12
DC Voltage at TXD, RXD, STBY and VSS -0.3 V 12
DC Voltage at CANH and CANL -58 58 V 12
Transient Voltage on CANH and CANL -150 100 V ISO-7637 (Figure 2-5) 12
Differential Bus Input Voltage (continuous) VDIFF(I) -5 10 V t = 60 days, continuous 12
Differential Bus Input Voltage (pulses) VDIFF(I) 17 V 1000 pulses, t = 0.1 ms, VCANH = +18V 12
Storage Temperature -55 150 °C 12
Operating Ambient Temperature -40 150 °C 12
Virtual Junction Temperature TVJ -40 190 °C IEC 60747-1 12
Soldering Temperature of Leads 300 °C 10 seconds 12
ESD Protection on CANH and CANL Pins -13 13 kV IEC 61000-4-2 12
ESD Protection on CANH and CANL Pins (Human Body Model) -8 8 kV IEC 801; Human Body Model 12
Specified Temperature Range (Extended, E grade) TA -40 125 C 23
Operating Temperature Range TA -40 150 C 23
Storage Temperature Range (thermal table) TA -65 155 C 23
Thermal Resistance, 8-Lead SOIC JA 149.5 C/W 23

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 32

CAD (KiCad official)

  • Symbol: MCP2544WFDT-E
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mcp2544wfdt-e-etched.step / mcp2544wfdt-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp2544wfdt-e.step / mcp2544wfdt-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (44 pp, sha256 484a6f42b22dcf87, retrieved 2026-10-19, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF