main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mcp19114-e: symbol viewer · Ray
mcp19114-e-etched.glb Publish 0.1.0 · Ray
mcp19114-e-etched.step mcp19114-e: factory component page (tier=mfr) · Ray
mcp19114-e-hero.glb mcp19114-e: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp19114-e-hero.overlay.json Publish 0.1.0 · Ray
mcp19114-e.glb Publish 0.1.0 · Ray
mcp19114-e.kicad_mod Publish 0.1.0 · Ray
mcp19114-e.kicad_sym mcp19114-e: symbol repaired (body fitted to the names) · Ray
mcp19114-e.lbr mcp19114-e: symbol repaired (body fitted to the names) · Ray
mcp19114-e.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 25 pins · Ray

MCP19114-E

Microchip Tech · DC-DC Controllers · QFN-24(4x4)

MCP19114-E from Microchip Tech, in a QFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GPA0/AN0/TEST_OUT bidirectional General-purpose TTL input or CMOS output (GPA0) that can also serve as A/D channel 0 input or, when selected in ABECON, as the buffered TEST_OUT analog/digital debug output.
2 GPA1/AN1/CLKPIN bidirectional General-purpose TTL input or CMOS output (GPA1) that can also serve as A/D channel 1 input and, when configured as main or secondary, as the switching frequency synchronization input or output (CLKPIN).
3 GPA2/AN2/T0CKI/INT bidirectional General-purpose Schmitt-trigger input or CMOS output (GPA2) that can also serve as A/D channel 2 input, Timer0 clock input T0CKI, or external interrupt INT.
4 GPA3/AN3 bidirectional General-purpose TTL input or CMOS output (GPA3) that can also serve as A/D channel 3 input.
5 GPA7/SCL/ICSPCLK bidirectional True open-drain general-purpose I/O (GPA7) with no internal connection to VDD and no weak pull-up; it is the primary ICSPCLK input and the I2C clock (SCL) when I2C is used and must be configured as an input for proper operation.
6 GPA6/CCD/ICSPDAT bidirectional General-purpose CMOS output / Schmitt-trigger input (GPA6) that also serves as ICSPDAT serial programming data I/O and as the CCD module pin (single compare output or dual capture input).
7 GPA5/MCLR/TEST_EN input General-purpose TTL input-only pin (GPA5) that becomes the MCLR Reset input with internal pull-up when MCLRE is set in the CONFIG register, and is also the test enable input.
8 GPB0/SDA bidirectional True open-drain general-purpose I/O (GPB0) with no internal connection to VDD and no weak pull-up; it serves as the I2C data (SDA) pin when I2C communication is configured and must be configured as an input for proper operation.
9 DESATN input Inverting input of the internal desaturation-detect comparator, used during quasi-resonant operation.
10 DESATP/ISOUT bidirectional Noninverting input of the DESAT detect comparator (DESATP) during quasi-resonant operation, or the secondary current sense amplifier output (ISOUT) when the feedback-resistor configuration (RFB) selects it.
11 ISP input Noninverting input of the internal current sense amplifier, typically used to differentially remote sense secondary current; it can be internally pulled up to VDD via the ISPUEN bit in the PE1 register.
12 ISN input Inverting input of the internal current sense amplifier, typically used to differentially remote sense secondary current.
13 IP input Primary input current sense for current mode control and peak current limit; for voltage mode control this pin can be connected to an artificial ramp.
14 AGND power_in Small-signal quiet ground that should be connected to the exposed pad on the bottom of the package.
15 PGND power_in Large-signal power ground; all large-signal ground returns should be connected here with a small loop area and minimal length.
16 SDRV output Gate drive output for the low-side secondary MOSFET; the PCB trace to the gate must be minimal in length and sized for high peak drive current.
17 PDRV output Gate drive output for the low-side primary MOSFET; the PCB trace to the gate must be minimal in length and sized for high peak drive current.
18 VDR power_in Supply pin for the low-side drivers with an absolute maximum rating of +13.5V; it can be connected to VDD through an RC filter and supplies 5V to 10V gate drive.
19 VDD power_out Output of the internal +5.0V LDO regulator, requiring a 1.0 µF minimum to 10 µF maximum bypass capacitor to GND placed close to the device.
20 VIN power_in Device input supply connection with an operating input range of 4.5V to 42V; capacitance should be placed between this pin and GND.
21 VS power_in Analog input to the noninverting input of the overvoltage comparator, typically used for output voltage overvoltage protection via a resistor divider.
22 IFB input Error amplifier inverting feedback connection.
23 ICOMP output Error amplifier output signal, used with external compensation to stabilize the control loop.
24 GPB1/AN4/VREF2 bidirectional General-purpose TTL input or CMOS output (GPB1) that can also serve as A/D channel 4 input and, when configured as main, as the VREF2 DAC output.
25 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-24(4x4)
Category Power Supply Chip
Pins 25

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN -VGND (operating) VIN -0.3 44 V 22
VIN (transient) VIN 48 V transient < 500 ms 22
VDD Internally Generated VDD 6.5 V 22
VDR Externally Generated VDR 13.5 V 22
Voltage on MCLR with respect to GND MCLR -0.3 13.5 V with respect to GND 22
Maximum output current sunk by any single I/O pin 25 mA 22
Maximum output current sourced by any single I/O pin 25 mA 22
Maximum current sourced by all GPIO 35 mA 22
Storage Temperature TS -65 150 °C 22
Maximum Junction Temperature TJ 150 °C 22
Operating Junction Temperature TJ -40 125 °C 22
Input Voltage VIN 4.5 42 V 22
Input Quiescent Current IQ 5 6.5 mA VIN = 12V, Not switching 22
Input Quiescent Current IQ 5 6.75 mA VIN = 20V, Not switching 22
Shutdown Current ISHDN 30 150 µA VIN = 12V 22
Internal Circuitry Bias Voltage VDD 4.75 5 5.5 V VIN = 6.0V to 42V 22
Maximum External VDD Output Current IDD_OUT 35 mA VIN = 6.0V to 42V 22
Line Regulation -0.1 0.002 0.1 %/V (VDD + 1.0V) ≤ VIN ≤ 20V 22
Load Regulation -0.65 0.1 0.65 % IDD_OUT = 1 mA to 20 mA 22
Dropout Voltage VIN -VDD 0.3 0.5 V IDD_OUT = 20 mA 23
Band Gap Tolerance BGTOL -2.5 2.5 % 23
UVLO Range UVLOON 4 20 V VIN Falling 23
UVLOON Trip Tolerance UVLOTOL -14 14 % VIN Falling, UVLO trip set to 9V, VINUVLO = 0x21h 23
UVLO Hysteresis UVLOHYS 1 4 8 % Hysteresis based upon UVLOON setting; UVLO trip set to 9V, VINUVLO = 0x21h 23
OVLO Range OVLOON 8.8 44 V VIN Rising 23
OVLOON Trip Tolerance OVLOTOL -14 14 % VIN Rising, OVLO trip set to 18V, VINOVLO = 0x1Fh 23
OVLO Hysteresis OVLOHYS 1 5 8 % Hysteresis based upon OVLOON setting; OVLO trip set to 18V, VINOVLO = 0x1Fh 23
OV DAC Tolerance OVREFTOL -10 10 % Full Scale, Code = 0xFF 24
VREF2 Sink Current ISINK -3 mA VREF2 = 0V, RL = 300 to BG 24
VREF2 Source Current ISOURCE 3 mA VREF2 = BG, RL = 300 to GND 24
VREF2 Tolerance VREF2TOL -10 10 % Full Scale, Code = 0xFF 24
Maximum Primary Current Sense Signal Voltage VIP_MAX 1.5 V Note 3 25
PWM Comparator Input-to-Output Delay TD 11 20 ns Note 3 25
Blanking Time Adjustable Range LEBRANGE 0 256 ns 4-Step Programmable Range (0, 50, 100, and 200 ns) (Note 3) 26
Offset Adjustment Range OSADJ_RANGE 0 750 mV 26
Slope m m 4.1 432.5 mV/µs 26
Ramp Set Point Tolerance mTOL -30 30 % Code 16d at 15.8 mV/µs; Code 32d at 54 mV/µs 26
Desaturation Comparator Common-Mode Input Voltage Range VCMR 2.7 V Note 3 26
VDR UVLO (2.7V VDR Falling) VDR_UVLO_2.7_F 2.45 2.9 V 2.7V VDR Falling 26
VDR UVLO (2.7 VDR Rising) VDR_UVLO_2.7_R 2.68 3.23 V 2.7 VDR Rising 26
VDR UVLO (2.7V) Hysteresis VDR_UVLO 2.7 HYS 190 415 mV 26
VDR UVLO (5.4V VDR Falling) VDR_UVLO_5.4_F 4.7 5.96 V 5.4V VDR Falling 26
VDR UVLO (5.4V VDR Rising) VDR_UVLO_5.4_R 5.15 6.56 V 5.4V VDR Rising 26
VDR UVLO (5.4V) Hysteresis VDR_UVLO 5.4 HYS 380 830 mV 26
PDRV/SDRV Gate Drive Source Resistance RDR-SRC 13.5 Ω VDR = 4.5V 27
PDRV/SDRV Gate Drive Sink Resistance RDR-SINK 12 Ω VDR = 4.5V 27
Dead-Time Adjustable Range DTRANGE 16 256 ns 27
Dead-Time Tolerance DTTOL -8 8 ns 27
Internal Oscillator Frequency FOSC 7.6 8 8.4 MHz 27
Switching Frequency Range Select N 4 255 FMAX = 2 MHz 27
GPIO Weak Pull-Up Current IPULL-UP_GPIO 50 250 400 µA 28
GPIO Input Low Voltage (TTL buffer) VGPIO_IL 0.8 V I/O Port with TTL buffer, VDD = 5V 28
GPIO Input High Voltage (TTL buffer) VGPIO_IH 2 V I/O Port with TTL buffer, VDD = 5V 28
GPIO Input Leakage Current GPIO_IIL -1 1 µA Negative current is defined as current sourced by the pin. 28
Specified Temperature Range TA -40 125 °C 28
Specified Temperature Range (test) TMCL 2 s VDD = 5 V, -40°C to +85°C 33
Thermal Resistance, 24L-QFN 4x4 JA 42 °C/W 28

CAD (KiCad official)

  • Symbol: MCP19114-E
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
  • 3D model: QFN-24(4x4) (KiCad packages3D, STEP)
  • 3D model files: mcp19114-e-etched.step / mcp19114-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp19114-e.step / mcp19114-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (236 pp, sha256 5154f9e01575897b, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF