3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMCP19114-E
Microchip Tech · DC-DC Controllers · QFN-24(4x4)
MCP19114-E from Microchip Tech, in a QFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GPA0/AN0/TEST_OUT | bidirectional | General-purpose TTL input or CMOS output (GPA0) that can also serve as A/D channel 0 input or, when selected in ABECON, as the buffered TEST_OUT analog/digital debug output. |
| 2 | GPA1/AN1/CLKPIN | bidirectional | General-purpose TTL input or CMOS output (GPA1) that can also serve as A/D channel 1 input and, when configured as main or secondary, as the switching frequency synchronization input or output (CLKPIN). |
| 3 | GPA2/AN2/T0CKI/INT | bidirectional | General-purpose Schmitt-trigger input or CMOS output (GPA2) that can also serve as A/D channel 2 input, Timer0 clock input T0CKI, or external interrupt INT. |
| 4 | GPA3/AN3 | bidirectional | General-purpose TTL input or CMOS output (GPA3) that can also serve as A/D channel 3 input. |
| 5 | GPA7/SCL/ICSPCLK | bidirectional | True open-drain general-purpose I/O (GPA7) with no internal connection to VDD and no weak pull-up; it is the primary ICSPCLK input and the I2C clock (SCL) when I2C is used and must be configured as an input for proper operation. |
| 6 | GPA6/CCD/ICSPDAT | bidirectional | General-purpose CMOS output / Schmitt-trigger input (GPA6) that also serves as ICSPDAT serial programming data I/O and as the CCD module pin (single compare output or dual capture input). |
| 7 | GPA5/MCLR/TEST_EN | input | General-purpose TTL input-only pin (GPA5) that becomes the MCLR Reset input with internal pull-up when MCLRE is set in the CONFIG register, and is also the test enable input. |
| 8 | GPB0/SDA | bidirectional | True open-drain general-purpose I/O (GPB0) with no internal connection to VDD and no weak pull-up; it serves as the I2C data (SDA) pin when I2C communication is configured and must be configured as an input for proper operation. |
| 9 | DESATN | input | Inverting input of the internal desaturation-detect comparator, used during quasi-resonant operation. |
| 10 | DESATP/ISOUT | bidirectional | Noninverting input of the DESAT detect comparator (DESATP) during quasi-resonant operation, or the secondary current sense amplifier output (ISOUT) when the feedback-resistor configuration (RFB) selects it. |
| 11 | ISP | input | Noninverting input of the internal current sense amplifier, typically used to differentially remote sense secondary current; it can be internally pulled up to VDD via the ISPUEN bit in the PE1 register. |
| 12 | ISN | input | Inverting input of the internal current sense amplifier, typically used to differentially remote sense secondary current. |
| 13 | IP | input | Primary input current sense for current mode control and peak current limit; for voltage mode control this pin can be connected to an artificial ramp. |
| 14 | AGND | power_in | Small-signal quiet ground that should be connected to the exposed pad on the bottom of the package. |
| 15 | PGND | power_in | Large-signal power ground; all large-signal ground returns should be connected here with a small loop area and minimal length. |
| 16 | SDRV | output | Gate drive output for the low-side secondary MOSFET; the PCB trace to the gate must be minimal in length and sized for high peak drive current. |
| 17 | PDRV | output | Gate drive output for the low-side primary MOSFET; the PCB trace to the gate must be minimal in length and sized for high peak drive current. |
| 18 | VDR | power_in | Supply pin for the low-side drivers with an absolute maximum rating of +13.5V; it can be connected to VDD through an RC filter and supplies 5V to 10V gate drive. |
| 19 | VDD | power_out | Output of the internal +5.0V LDO regulator, requiring a 1.0 µF minimum to 10 µF maximum bypass capacitor to GND placed close to the device. |
| 20 | VIN | power_in | Device input supply connection with an operating input range of 4.5V to 42V; capacitance should be placed between this pin and GND. |
| 21 | VS | power_in | Analog input to the noninverting input of the overvoltage comparator, typically used for output voltage overvoltage protection via a resistor divider. |
| 22 | IFB | input | Error amplifier inverting feedback connection. |
| 23 | ICOMP | output | Error amplifier output signal, used with external compensation to stabilize the control loop. |
| 24 | GPB1/AN4/VREF2 | bidirectional | General-purpose TTL input or CMOS output (GPB1) that can also serve as A/D channel 4 input and, when configured as main, as the VREF2 DAC output. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-24(4x4) |
| Category | Power Supply Chip |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN -VGND (operating) | VIN | -0.3 | 44 | V | 22 | ||
| VIN (transient) | VIN | 48 | V | transient < 500 ms | 22 | ||
| VDD Internally Generated | VDD | 6.5 | V | 22 | |||
| VDR Externally Generated | VDR | 13.5 | V | 22 | |||
| Voltage on MCLR with respect to GND | MCLR | -0.3 | 13.5 | V | with respect to GND | 22 | |
| Maximum output current sunk by any single I/O pin | 25 | mA | 22 | ||||
| Maximum output current sourced by any single I/O pin | 25 | mA | 22 | ||||
| Maximum current sourced by all GPIO | 35 | mA | 22 | ||||
| Storage Temperature | TS | -65 | 150 | °C | 22 | ||
| Maximum Junction Temperature | TJ | 150 | °C | 22 | |||
| Operating Junction Temperature | TJ | -40 | 125 | °C | 22 | ||
| Input Voltage | VIN | 4.5 | 42 | V | 22 | ||
| Input Quiescent Current | IQ | 5 | 6.5 | mA | VIN = 12V, Not switching | 22 | |
| Input Quiescent Current | IQ | 5 | 6.75 | mA | VIN = 20V, Not switching | 22 | |
| Shutdown Current | ISHDN | 30 | 150 | µA | VIN = 12V | 22 | |
| Internal Circuitry Bias Voltage | VDD | 4.75 | 5 | 5.5 | V | VIN = 6.0V to 42V | 22 |
| Maximum External VDD Output Current | IDD_OUT | 35 | mA | VIN = 6.0V to 42V | 22 | ||
| Line Regulation | -0.1 | 0.002 | 0.1 | %/V | (VDD + 1.0V) ≤ VIN ≤ 20V | 22 | |
| Load Regulation | -0.65 | 0.1 | 0.65 | % | IDD_OUT = 1 mA to 20 mA | 22 | |
| Dropout Voltage | VIN -VDD | 0.3 | 0.5 | V | IDD_OUT = 20 mA | 23 | |
| Band Gap Tolerance | BGTOL | -2.5 | 2.5 | % | 23 | ||
| UVLO Range | UVLOON | 4 | 20 | V | VIN Falling | 23 | |
| UVLOON Trip Tolerance | UVLOTOL | -14 | 14 | % | VIN Falling, UVLO trip set to 9V, VINUVLO = 0x21h | 23 | |
| UVLO Hysteresis | UVLOHYS | 1 | 4 | 8 | % | Hysteresis based upon UVLOON setting; UVLO trip set to 9V, VINUVLO = 0x21h | 23 |
| OVLO Range | OVLOON | 8.8 | 44 | V | VIN Rising | 23 | |
| OVLOON Trip Tolerance | OVLOTOL | -14 | 14 | % | VIN Rising, OVLO trip set to 18V, VINOVLO = 0x1Fh | 23 | |
| OVLO Hysteresis | OVLOHYS | 1 | 5 | 8 | % | Hysteresis based upon OVLOON setting; OVLO trip set to 18V, VINOVLO = 0x1Fh | 23 |
| OV DAC Tolerance | OVREFTOL | -10 | 10 | % | Full Scale, Code = 0xFF | 24 | |
| VREF2 Sink Current | ISINK | -3 | mA | VREF2 = 0V, RL = 300 to BG | 24 | ||
| VREF2 Source Current | ISOURCE | 3 | mA | VREF2 = BG, RL = 300 to GND | 24 | ||
| VREF2 Tolerance | VREF2TOL | -10 | 10 | % | Full Scale, Code = 0xFF | 24 | |
| Maximum Primary Current Sense Signal Voltage | VIP_MAX | 1.5 | V | Note 3 | 25 | ||
| PWM Comparator Input-to-Output Delay | TD | 11 | 20 | ns | Note 3 | 25 | |
| Blanking Time Adjustable Range | LEBRANGE | 0 | 256 | ns | 4-Step Programmable Range (0, 50, 100, and 200 ns) (Note 3) | 26 | |
| Offset Adjustment Range | OSADJ_RANGE | 0 | 750 | mV | 26 | ||
| Slope m | m | 4.1 | 432.5 | mV/µs | 26 | ||
| Ramp Set Point Tolerance | mTOL | -30 | 30 | % | Code 16d at 15.8 mV/µs; Code 32d at 54 mV/µs | 26 | |
| Desaturation Comparator Common-Mode Input Voltage Range | VCMR | 2.7 | V | Note 3 | 26 | ||
| VDR UVLO (2.7V VDR Falling) | VDR_UVLO_2.7_F | 2.45 | 2.9 | V | 2.7V VDR Falling | 26 | |
| VDR UVLO (2.7 VDR Rising) | VDR_UVLO_2.7_R | 2.68 | 3.23 | V | 2.7 VDR Rising | 26 | |
| VDR UVLO (2.7V) Hysteresis | VDR_UVLO 2.7 HYS | 190 | 415 | mV | 26 | ||
| VDR UVLO (5.4V VDR Falling) | VDR_UVLO_5.4_F | 4.7 | 5.96 | V | 5.4V VDR Falling | 26 | |
| VDR UVLO (5.4V VDR Rising) | VDR_UVLO_5.4_R | 5.15 | 6.56 | V | 5.4V VDR Rising | 26 | |
| VDR UVLO (5.4V) Hysteresis | VDR_UVLO 5.4 HYS | 380 | 830 | mV | 26 | ||
| PDRV/SDRV Gate Drive Source Resistance | RDR-SRC | 13.5 | Ω | VDR = 4.5V | 27 | ||
| PDRV/SDRV Gate Drive Sink Resistance | RDR-SINK | 12 | Ω | VDR = 4.5V | 27 | ||
| Dead-Time Adjustable Range | DTRANGE | 16 | 256 | ns | 27 | ||
| Dead-Time Tolerance | DTTOL | -8 | 8 | ns | 27 | ||
| Internal Oscillator Frequency | FOSC | 7.6 | 8 | 8.4 | MHz | 27 | |
| Switching Frequency Range Select | N | 4 | 255 | FMAX = 2 MHz | 27 | ||
| GPIO Weak Pull-Up Current | IPULL-UP_GPIO | 50 | 250 | 400 | µA | 28 | |
| GPIO Input Low Voltage (TTL buffer) | VGPIO_IL | 0.8 | V | I/O Port with TTL buffer, VDD = 5V | 28 | ||
| GPIO Input High Voltage (TTL buffer) | VGPIO_IH | 2 | V | I/O Port with TTL buffer, VDD = 5V | 28 | ||
| GPIO Input Leakage Current | GPIO_IIL | -1 | 1 | µA | Negative current is defined as current sourced by the pin. | 28 | |
| Specified Temperature Range | TA | -40 | 125 | °C | 28 | ||
| Specified Temperature Range (test) | TMCL | 2 | s | VDD = 5 V, -40°C to +85°C | 33 | ||
| Thermal Resistance, 24L-QFN 4x4 | JA | 42 | °C/W | 28 |
CAD (KiCad official)
- Symbol:
MCP19114-E - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: QFN-24(4x4) (KiCad packages3D, STEP)
- 3D model files:
mcp19114-e-etched.step/mcp19114-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp19114-e.step/mcp19114-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (236 pp, sha256
5154f9e01575897b, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).