main
Ray
Publish 0.1.0
3cd96a4
MCP1824T-0802E
Microchip Tech · Power Management Specialized - PMIC · SOT-23-5
MCP1824T-0802E from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage supply, operating from 2.1V to 6.0V, with a 1 µF to 10 µF input capacitor recommended when the source is remote or a battery. |
| 2 | GND | power_in | Ground pin that should be tied to an electrically quiet circuit ground for optimal noise and power supply rejection performance. |
| 3 | SHDN | input | Active-low shutdown control input: a logic-high enables the LDO output and a logic-low disables it, reducing quiescent current to a typical 0.1 µA and also pulling PWRGD low. |
| 4 | PWRGD | output | Open-drain power good output that indicates the output is within 92% (typical) of regulation, with 2% typical hysteresis and a fixed 110 µs (typical) power-up delay. |
| 5 | VOUT | power_out | Regulated output voltage (0.8V for the -0802E variant) that requires a minimum of 1.0 µF of ceramic, tantalum, or aluminum electrolytic output capacitance for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 2.1 | 6 | V | 7 | ||
| Output Voltage Range | VOUT | 0.8 | 5 | V | 7 | ||
| Input Quiescent Current | Iq | 120 | 220 | µA | IL = 0 mA, VOUT = 0.8V to 5.0V | 7 | |
| Input Quiescent Current for SHDN Mode | ISHDN | 0.1 | 3 | µA | SHDN = GND | 7 | |
| Maximum Continuous Output Current | IOUT | 300 | mA | VIN = 2.1V to 6.0V, VR = 0.8V to 5.0V | 7 | ||
| Line Regulation | ΔVOUT/(VOUT x ΔVIN) | -0.17 | 0.05 | 0.17 | %/V | (Note 1) ≤ VIN ≤ 6V | 7 |
| Load Regulation | ΔVOUT/VOUT | -1 | 0.5 | 1 | % | IOUT = 1 mA to 300 mA, (Note 4) | 7 |
| Dropout Voltage | VDROPOUT | 200 | 320 | mV | Note 5, IOUT = 300 mA, VIN(MIN) = 2.1V | 7 | |
| Maximum Pulsed Output Duty Cycle | IPULSE_DUTY | 60 | % | VIN = 2.1V to 6.0V, VR = 0.8V to 5.0V, IOUT = 500 mA, Period < 10 ms | 8 | ||
| Maximum Pulsed Output Period | IPULSE_PERIOD | 10 | ms | VIN = 2.1V to 6.0V, VR = 0.8V to 5.0V, IOUT = 500 mA | 8 | ||
| Fixed-Output Voltage Regulation (relative to VR) | VOUT | -2.5 | 0.5 | 2.5 | % | Note 2 | 8 |
| PWRGD Input Voltage Operating Range | VPWRGD_VIN | 1 | 6 | V | TA = +25°C | 8 | |
| PWRGD Input Voltage Operating Range (second row) | 1.2 | 6 | V | TA = -40°C to +125°C | 8 | ||
| PWRGD Threshold Voltage (referenced to VOUT) | VPWRGD_TH | 89 | 92 | 95 | %VOUT | Falling edge; VOUT < 2.5V Fixed | 8 |
| PWRGD Threshold Hysteresis | VPWRGD_HYS | 1 | 2 | 3 | %VOUT | 8 | |
| PWRGD Output Voltage Low | VPWRGD_L | 0.05 | 0.4 | V | IPWRGD SINK = 1.2 mA, ADJ = 0V | 8 | |
| PWRGD Output Current Sink Capability | IPWRGD | 1.2 | 6 | mA | VPWRGD = 0.200V | 8 | |
| Shutdown Logic High Input | VSHDN-HIGH | 45 | %VIN | VIN = 2.1V to 6.0V | 9 | ||
| Shutdown Logic Low Input | VSHDN-LOW | 15 | %VIN | VIN = 2.1V to 6.0V | 9 | ||
| SHDN Input Leakage Current | SHDNILK | -0.1 | 0.001 | 0.1 | µA | VIN = 6V, SHDN = VIN, SHDN = GND | 9 |
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | Steady State | 10 | |
| Maximum Junction Temperature | TJ | 150 | °C | Transient | 10 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 10 | ||
| Thermal Resistance, 5LD SOT-23 junction-to-ambient | θJA | 256 | °C/W | EIA/JEDEC JESD51-751-7, 4 Layer Board | 10 | ||
| Thermal Resistance, 5LD SOT-23 junction-to-case | θJC | 81 | °C/W | EIA/JEDEC JESD51-751-7, 4 Layer Board | 10 | ||
| ESD protection on all pins, HBM | 4 | kV | ≥ 4 kV HBM | 7 | |||
| ESD protection on all pins, MM | 300 | V | ≥ 300V MM | 7 |
CAD (KiCad official)
- Symbol:
MCP1824T-0802E - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mcp1824t-0802e-etched.step/mcp1824t-0802e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1824t-0802e.step/mcp1824t-0802e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (34 pp, sha256
dda3986a6bed8be8, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP1824T-0802E
**Microchip Tech** · Power Management Specialized - PMIC · SOT-23-5
MCP1824T-0802E from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage supply, operating from 2.1V to 6.0V, with a 1 µF to 10 µF input capacitor recommended when the source is remote or a battery. |
| 2 | GND | power_in | Ground pin that should be tied to an electrically quiet circuit ground for optimal noise and power supply rejection performance. |
| 3 | SHDN | input | Active-low shutdown control input: a logic-high enables the LDO output and a logic-low disables it, reducing quiescent current to a typical 0.1 µA and also pulling PWRGD low. |
| 4 | PWRGD | output | Open-drain power good output that indicates the output is within 92% (typical) of regulation, with 2% typical hysteresis and a fixed 110 µs (typical) power-up delay. |
| 5 | VOUT | power_out | Regulated output voltage (0.8V for the -0802E variant) that requires a minimum of 1.0 µF of ceramic, tantalum, or aluminum electrolytic output capacitance for stability. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 2.1 | | 6 | V | | 7 |
| Output Voltage Range | VOUT | 0.8 | | 5 | V | | 7 |
| Input Quiescent Current | Iq | | 120 | 220 | µA | IL = 0 mA, VOUT = 0.8V to 5.0V | 7 |
| Input Quiescent Current for SHDN Mode | ISHDN | | 0.1 | 3 | µA | SHDN = GND | 7 |
| Maximum Continuous Output Current | IOUT | 300 | | | mA | VIN = 2.1V to 6.0V, VR = 0.8V to 5.0V | 7 |
| Line Regulation | ΔVOUT/(VOUT x ΔVIN) | -0.17 | 0.05 | 0.17 | %/V | (Note 1) ≤ VIN ≤ 6V | 7 |
| Load Regulation | ΔVOUT/VOUT | -1 | 0.5 | 1 | % | IOUT = 1 mA to 300 mA, (Note 4) | 7 |
| Dropout Voltage | VDROPOUT | | 200 | 320 | mV | Note 5, IOUT = 300 mA, VIN(MIN) = 2.1V | 7 |
| Maximum Pulsed Output Duty Cycle | IPULSE_DUTY | | | 60 | % | VIN = 2.1V to 6.0V, VR = 0.8V to 5.0V, IOUT = 500 mA, Period < 10 ms | 8 |
| Maximum Pulsed Output Period | IPULSE_PERIOD | | | 10 | ms | VIN = 2.1V to 6.0V, VR = 0.8V to 5.0V, IOUT = 500 mA | 8 |
| Fixed-Output Voltage Regulation (relative to VR) | VOUT | -2.5 | 0.5 | 2.5 | % | Note 2 | 8 |
| PWRGD Input Voltage Operating Range | VPWRGD_VIN | 1 | | 6 | V | TA = +25°C | 8 |
| PWRGD Input Voltage Operating Range (second row) | | 1.2 | | 6 | V | TA = -40°C to +125°C | 8 |
| PWRGD Threshold Voltage (referenced to VOUT) | VPWRGD_TH | 89 | 92 | 95 | %VOUT | Falling edge; VOUT < 2.5V Fixed | 8 |
| PWRGD Threshold Hysteresis | VPWRGD_HYS | 1 | 2 | 3 | %VOUT | | 8 |
| PWRGD Output Voltage Low | VPWRGD_L | | 0.05 | 0.4 | V | IPWRGD SINK = 1.2 mA, ADJ = 0V | 8 |
| PWRGD Output Current Sink Capability | IPWRGD | 1.2 | 6 | | mA | VPWRGD = 0.200V | 8 |
| Shutdown Logic High Input | VSHDN-HIGH | 45 | | | %VIN | VIN = 2.1V to 6.0V | 9 |
| Shutdown Logic Low Input | VSHDN-LOW | | | 15 | %VIN | VIN = 2.1V to 6.0V | 9 |
| SHDN Input Leakage Current | SHDNILK | -0.1 | 0.001 | 0.1 | µA | VIN = 6V, SHDN = VIN, SHDN = GND | 9 |
| Operating Junction Temperature Range | TJ | -40 | | 125 | °C | Steady State | 10 |
| Maximum Junction Temperature | TJ | | | 150 | °C | Transient | 10 |
| Storage Temperature Range | TA | -65 | | 150 | °C | | 10 |
| Thermal Resistance, 5LD SOT-23 junction-to-ambient | θJA | | 256 | | °C/W | EIA/JEDEC JESD51-751-7, 4 Layer Board | 10 |
| Thermal Resistance, 5LD SOT-23 junction-to-case | θJC | | 81 | | °C/W | EIA/JEDEC JESD51-751-7, 4 Layer Board | 10 |
| ESD protection on all pins, HBM | | 4 | | | kV | ≥ 4 kV HBM | 7 |
| ESD protection on all pins, MM | | 300 | | | V | ≥ 300V MM | 7 |
## CAD (KiCad official)
- Symbol: `MCP1824T-0802E`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `mcp1824t-0802e-etched.step` / `mcp1824t-0802e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp1824t-0802e.step` / `mcp1824t-0802e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/22070a.pdf) (34 pp, sha256 `dda3986a6bed8be8`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp1824t-0802e-datasheet.pdf)