main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mcp1824t-0802e: viewers · Ray
mcp1824t-0802e-etched.glb Publish 0.1.0 · Ray
mcp1824t-0802e-etched.step mcp1824t-0802e: factory component page (tier=mfr) · Ray
mcp1824t-0802e-hero.glb mcp1824t-0802e: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp1824t-0802e-hero.overlay.json Publish 0.1.0 · Ray
mcp1824t-0802e.glb Publish 0.1.0 · Ray
mcp1824t-0802e.kicad_mod Publish 0.1.0 · Ray
mcp1824t-0802e.kicad_sym Publish 0.1.0 · Ray
mcp1824t-0802e.lbr Publish 0.1.0 · Ray
mcp1824t-0802e.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 5 pins · Ray

MCP1824T-0802E

Microchip Tech · Power Management Specialized - PMIC · SOT-23-5

MCP1824T-0802E from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input voltage supply, operating from 2.1V to 6.0V, with a 1 µF to 10 µF input capacitor recommended when the source is remote or a battery.
2 GND power_in Ground pin that should be tied to an electrically quiet circuit ground for optimal noise and power supply rejection performance.
3 SHDN input Active-low shutdown control input: a logic-high enables the LDO output and a logic-low disables it, reducing quiescent current to a typical 0.1 µA and also pulling PWRGD low.
4 PWRGD output Open-drain power good output that indicates the output is within 92% (typical) of regulation, with 2% typical hysteresis and a fixed 110 µs (typical) power-up delay.
5 VOUT power_out Regulated output voltage (0.8V for the -0802E variant) that requires a minimum of 1.0 µF of ceramic, tantalum, or aluminum electrolytic output capacitance for stability.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Operating Voltage VIN 2.1 6 V 7
Output Voltage Range VOUT 0.8 5 V 7
Input Quiescent Current Iq 120 220 µA IL = 0 mA, VOUT = 0.8V to 5.0V 7
Input Quiescent Current for SHDN Mode ISHDN 0.1 3 µA SHDN = GND 7
Maximum Continuous Output Current IOUT 300 mA VIN = 2.1V to 6.0V, VR = 0.8V to 5.0V 7
Line Regulation ΔVOUT/(VOUT x ΔVIN) -0.17 0.05 0.17 %/V (Note 1) ≤ VIN ≤ 6V 7
Load Regulation ΔVOUT/VOUT -1 0.5 1 % IOUT = 1 mA to 300 mA, (Note 4) 7
Dropout Voltage VDROPOUT 200 320 mV Note 5, IOUT = 300 mA, VIN(MIN) = 2.1V 7
Maximum Pulsed Output Duty Cycle IPULSE_DUTY 60 % VIN = 2.1V to 6.0V, VR = 0.8V to 5.0V, IOUT = 500 mA, Period < 10 ms 8
Maximum Pulsed Output Period IPULSE_PERIOD 10 ms VIN = 2.1V to 6.0V, VR = 0.8V to 5.0V, IOUT = 500 mA 8
Fixed-Output Voltage Regulation (relative to VR) VOUT -2.5 0.5 2.5 % Note 2 8
PWRGD Input Voltage Operating Range VPWRGD_VIN 1 6 V TA = +25°C 8
PWRGD Input Voltage Operating Range (second row) 1.2 6 V TA = -40°C to +125°C 8
PWRGD Threshold Voltage (referenced to VOUT) VPWRGD_TH 89 92 95 %VOUT Falling edge; VOUT < 2.5V Fixed 8
PWRGD Threshold Hysteresis VPWRGD_HYS 1 2 3 %VOUT 8
PWRGD Output Voltage Low VPWRGD_L 0.05 0.4 V IPWRGD SINK = 1.2 mA, ADJ = 0V 8
PWRGD Output Current Sink Capability IPWRGD 1.2 6 mA VPWRGD = 0.200V 8
Shutdown Logic High Input VSHDN-HIGH 45 %VIN VIN = 2.1V to 6.0V 9
Shutdown Logic Low Input VSHDN-LOW 15 %VIN VIN = 2.1V to 6.0V 9
SHDN Input Leakage Current SHDNILK -0.1 0.001 0.1 µA VIN = 6V, SHDN = VIN, SHDN = GND 9
Operating Junction Temperature Range TJ -40 125 °C Steady State 10
Maximum Junction Temperature TJ 150 °C Transient 10
Storage Temperature Range TA -65 150 °C 10
Thermal Resistance, 5LD SOT-23 junction-to-ambient θJA 256 °C/W EIA/JEDEC JESD51-751-7, 4 Layer Board 10
Thermal Resistance, 5LD SOT-23 junction-to-case θJC 81 °C/W EIA/JEDEC JESD51-751-7, 4 Layer Board 10
ESD protection on all pins, HBM 4 kV ≥ 4 kV HBM 7
ESD protection on all pins, MM 300 V ≥ 300V MM 7

CAD (KiCad official)

  • Symbol: MCP1824T-0802E
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: mcp1824t-0802e-etched.step / mcp1824t-0802e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp1824t-0802e.step / mcp1824t-0802e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (34 pp, sha256 dda3986a6bed8be8, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF