main
Ray Publish 0.1.0 4caf353 17d ago

MCP1755T-3302E

Microchip Tech · Power Management - Specialized · SOT-23-5

MCP1755T-3302E from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Unregulated supply input, specified from 3.6V to 16.0V; low source impedance is needed for stable operation, and about 1 µF of capacitance is sufficient for most applications.
2 GND power_in Regulator ground that is tied to the negative side of the input and output capacitors and carries only the LDO bias current, with voltage drops to the load minimized.
3 SHDN input Shutdown input where a logic-high enables the LDO output and a logic-low disables it, also driving PWRGD low and placing the LDO in a low quiescent current shutdown state.
4 PWRGD output Open-drain power good output that goes active when VOUT is within 92% (typical) of nominal, with 2% typical hysteresis and a 100 µs (typical) power-up delay, and may be pulled up to VIN or VOUT.
5 VOUT power_out Regulated voltage output that connects to the load and the positive side of the output capacitor, which should be placed as close to this pin as practical, and carries the DC load current.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Operating Voltage VIN 3.6 16 V 6
Maximum Output Current IOUT_mA 300 mA 6
Input Quiescent Current for SHDN Mode ISHDN 0.1 4 µA SHDN = GND 6
Output Voltage Regulation VOUT -2 0.85 2 % Note 2 6
Line Regulation VOUT/(VOUT x VIN) -0.05 0.01 0.05 %/V VR + 1V <= VIN <= 16V 6
Load Regulation VOUT/VOUT -0.5 0.1 0.5 % IL = 1.0 mA to 300 mA (Note 4) 6
Dropout Voltage VDROPOUT 300 500 mV IL = 300 mA 6
Dropout Current IDO 75 120 µA VIN = 0.95 VR, IOUT = 0 mA 6
Logic High Input (SHDN) VSHDN-HIGH 2.4 V 6
Logic Low Input (SHDN) VSHDN-LOW 0 0.8 V 6
Shutdown Input Leakage Current SHDNILK 0.02 0.2 µA SHDN = 16V 6
PWRGD Input Voltage Operating Range VPWRGD_VIN 1.7 V ISINK = 1 mA 6
PWRGD Threshold Voltage (referenced to VOUT) VPWRGD_TH 90 92 94 %VOUT Falling edge of VOUT 6
PWRGD Output Voltage Low VPWRGD_L 0.2 0.45 V IPWRGD_SINK = 5.0 mA, VOUT = 0V 7
PWRGD Output Sink Current IPWRGD_L 5 mA VPWRGD <= 0.45V 7
PWRGD Leakage Current IPWRGD_LK 50 200 nA VPWRGD pull-up = 10 k to VIN, VIN = 16V 7
Power Supply Ripple Rejection Ratio PSRR 80 dB VR = 5V, f = 1 kHz, IL = 100 mA, VINAC = 1VPK-PK, CIN = 0 µF, VIN >= VR + 1.5V >= 3.6V 8
Specified Temperature Range TA -40 125 °C 8
Operating Temperature Range TJ -40 150 °C 8
Storage Temperature Range TA -55 150 °C 5
Maximum Junction Temperature 165 °C Note 7 5
Input Voltage VIN 17.6 V 5
VOUT pin voltage VOUT 5.5 V 5
ESD Protection on All Pins (HBM) 3 kV HBM 5
ESD Protection on All Pins (MM) 400 V MM 5
Thermal Resistance, SOT-23-5, junction to ambient JA 256 °C/W SOT-23-5 package 8
Thermal Resistance, SOT-23-5, junction to case JC 81 °C/W SOT-23-5 package 8

CAD (KiCad official)

  • Symbol: MCP1755T-3302E
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: mcp1755t-3302e-etched.step / mcp1755t-3302e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp1755t-3302e.step / mcp1755t-3302e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (42 pp, sha256 4868d8c139ed953b, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF