main
Ray Publish 0.1.0 63232db

MCP1754T-3302E

Microchip Tech · Linear Voltage Regulators (LDO) · SOT-23-5

MCP1754T-3302E from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Unregulated input supply voltage with an operating range of 3.6V to 16.0V, where at least 1 µF of capacitance is needed for stable operation.
2 GND power_in Regulator ground to which the LDO output regulation is referenced, carrying only the LDO bias current.
3 SHDN input Shutdown input where a logic high enables the LDO output and a logic low disables it and drives PWRGD low.
4 PWRGD output Open-drain power good output that indicates when VOUT is within 92% (typical) of its nominal regulation value and may be pulled up to VIN or VOUT.
5 VOUT power_out Regulated voltage output that supplies the DC load current, with the output capacitor positive side placed as close to this pin as practical.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Operating Voltage VIN 3.6 16 V 5
Output Voltage Operating Range VOUT-RANGE 1.8 5.5 V 5
Input Quiescent Current Iq 56 90 µA IL = 0 mA 5
Input Quiescent Current for SHDN Mode ISHDN 0.1 5 µA SHDN = GND 5
Ground Current IGND 150 250 µA ILOAD = 150 mA 5
Maximum Output Current IOUT 150 mA 5
Output Soft Current Limit IOUT_SCL 250 mA VIN = VIN(MIN), VOUT 0.1V, current measured 10 ms after load is applied 5
Output Pulse Current Limit IOUT_PCL 250 mA Pulse Duration < 100 ms, Duty Cycle < 50%, VOUT 0.1V (Note 6) 5
Output Short-Circuit Foldback Current IOUT_SC 30 mA VIN = VIN(MIN), VOUT = GND 5
Output Voltage Overshoot on Start-up VOVER 0.5 %VOUT VIN = 0 to 16V, ILOAD = 150 mA 5
Output Voltage Regulation Tolerance VOUT -2 0.2 2 % Note 2; min/max are VR -2.0% and VR +2.0%, typ VR ±0.2% 5
Line Regulation VOUT/(VOUT x VIN) -0.05 0.01 0.05 %/V VR + 1V VIN 16V 6
Load Regulation VOUT/VOUT -1.1 -0.4 0 % IL = 1.0 mA to 150 mA (Note 4) 6
Dropout Voltage VDROPOUT 300 500 mV IL = 150 mA 6
Dropout Current IDO 50 85 µA VIN = 0.95VR, IOUT = 0 mA 6
VOUT Temperature Coefficient TCVOUT 22 ppm/°C Note 3 6
Undervoltage Lockout UVLO 2.95 V Rising VIN 6
Undervoltage Lockout Hysteresis UVLOHYS 285 mV Falling VIN 6
Logic High Input VSHDN-HIGH 2.4 V 6
Logic Low Input VSHDN-LOW 0 0.8 V 6
Shutdown Input Leakage Current SHDNILK 0.1 0.5 µA SHDN = GND 6
Shutdown Input Leakage Current SHDNILK 0.5 2 µA SHDN = 16V 6
PWRGD Input Voltage Operating Range VPWRGD_VIN 1.7 V ISINK = 1 mA 6
PWRGD Threshold Voltage (referenced to VOUT) VPWRGD_TH 90 92 94 %VOUT Falling edge of VOUT 6
PWRGD Threshold Hysteresis VPWRGD_HYS 2 %VOUT Rising edge of VOUT 6
PWRGD Output Voltage Low VPWRGD_L 0.2 0.6 V IPWRGD_SINK = 5.0 mA, VOUT = 0V 6
PWRGD Output Sink Current IPWRGD_L 5 mA VPWRGD 0.4V 6
PWRGD Leakage Current IPWRGD_LK 40 700 nA VPWRGD pull-up = 10 k to VIN, VIN = 16V 6
PWRGD Time Delay TPG 100 µs Rising Edge of VOUT, RPULLUP = 10 k 6
Detect Threshold to PWRGD Active Time Delay TVDET_PWRGD 200 µs Falling edge of VOUT after transition from VOUT = VPWRGD_TH + 50 mV to VPWRGD_TH, 50 mV, RPULLUP = 10 k to VIN 7
Output Delay from VIN to VOUT = 90% VREG TDELAY 240 µs VIN = 0V to 16V, VOUT = 90% VR, tr(VIN) = 5V/µs, COUT = 1 µF, SHDN = VIN 7
Output Delay from VIN to VOUT > 0.1V TDELAY_START 80 µs VIN = 0V to 16V, VOUT 0.1V, tr(VIN) = 5V/µs, SHDN = VIN 7
Output Delay from SHDN to VOUT = 90% VREG TDELAY_SHDN 160 µs VIN = 16V, VOUT = 90% VR, COUT = 1 µF, SHDN = GND to VIN 7
Output Noise eN 3 µV/(Hz)1/2 IL = 50 mA, f = 1 kHz, COUT = 1 µF 7
Power Supply Ripple Rejection Ratio PSRR 72 dB VR = 5V, f = 1 kHz, IL = 150 mA, VINAC = 1V pk-pk, CIN = 0 µF, VIN = VR + 1.5V 7
Thermal Shutdown Temperature TSD 150 °C Note 6 7
Thermal Shutdown Hysteresis TSD 10 °C 7
Specified Temperature Range TA -40 125 °C 8
Operating Temperature Range TJ -40 150 °C 8
Storage Temperature Range TA -55 150 °C 8
Input Voltage Absolute Maximum VIN 17.6 V 5
Output Voltage Absolute Maximum VOUT -0.3 5.5 V Relative to GND 5
Maximum Junction Temperature TJ 165 °C Note 7 5
Thermal Resistance, Junction to Ambient, SOT-23-5 JA 256 °C/W 8
Thermal Resistance, Junction to Case, SOT-23-5 JC 81 °C/W 8

CAD (KiCad official)

  • Symbol: MCP1754T-3302E
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: mcp1754t-3302e-etched.step / mcp1754t-3302e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp1754t-3302e.step / mcp1754t-3302e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (47 pp, sha256 159e3586a7530eee, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF