3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMCP1754T-3302E
Microchip Tech · Linear Voltage Regulators (LDO) · SOT-23-5
MCP1754T-3302E from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated input supply voltage with an operating range of 3.6V to 16.0V, where at least 1 µF of capacitance is needed for stable operation. |
| 2 | GND | power_in | Regulator ground to which the LDO output regulation is referenced, carrying only the LDO bias current. |
| 3 | SHDN | input | Shutdown input where a logic high enables the LDO output and a logic low disables it and drives PWRGD low. |
| 4 | PWRGD | output | Open-drain power good output that indicates when VOUT is within 92% (typical) of its nominal regulation value and may be pulled up to VIN or VOUT. |
| 5 | VOUT | power_out | Regulated voltage output that supplies the DC load current, with the output capacitor positive side placed as close to this pin as practical. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 3.6 | 16 | V | 5 | ||
| Output Voltage Operating Range | VOUT-RANGE | 1.8 | 5.5 | V | 5 | ||
| Input Quiescent Current | Iq | 56 | 90 | µA | IL = 0 mA | 5 | |
| Input Quiescent Current for SHDN Mode | ISHDN | 0.1 | 5 | µA | SHDN = GND | 5 | |
| Ground Current | IGND | 150 | 250 | µA | ILOAD = 150 mA | 5 | |
| Maximum Output Current | IOUT | 150 | mA | 5 | |||
| Output Soft Current Limit | IOUT_SCL | 250 | mA | VIN = VIN(MIN), VOUT 0.1V, current measured 10 ms after load is applied | 5 | ||
| Output Pulse Current Limit | IOUT_PCL | 250 | mA | Pulse Duration < 100 ms, Duty Cycle < 50%, VOUT 0.1V (Note 6) | 5 | ||
| Output Short-Circuit Foldback Current | IOUT_SC | 30 | mA | VIN = VIN(MIN), VOUT = GND | 5 | ||
| Output Voltage Overshoot on Start-up | VOVER | 0.5 | %VOUT | VIN = 0 to 16V, ILOAD = 150 mA | 5 | ||
| Output Voltage Regulation Tolerance | VOUT | -2 | 0.2 | 2 | % | Note 2; min/max are VR -2.0% and VR +2.0%, typ VR ±0.2% | 5 |
| Line Regulation | VOUT/(VOUT x VIN) | -0.05 | 0.01 | 0.05 | %/V | VR + 1V VIN 16V | 6 |
| Load Regulation | VOUT/VOUT | -1.1 | -0.4 | 0 | % | IL = 1.0 mA to 150 mA (Note 4) | 6 |
| Dropout Voltage | VDROPOUT | 300 | 500 | mV | IL = 150 mA | 6 | |
| Dropout Current | IDO | 50 | 85 | µA | VIN = 0.95VR, IOUT = 0 mA | 6 | |
| VOUT Temperature Coefficient | TCVOUT | 22 | ppm/°C | Note 3 | 6 | ||
| Undervoltage Lockout | UVLO | 2.95 | V | Rising VIN | 6 | ||
| Undervoltage Lockout Hysteresis | UVLOHYS | 285 | mV | Falling VIN | 6 | ||
| Logic High Input | VSHDN-HIGH | 2.4 | V | 6 | |||
| Logic Low Input | VSHDN-LOW | 0 | 0.8 | V | 6 | ||
| Shutdown Input Leakage Current | SHDNILK | 0.1 | 0.5 | µA | SHDN = GND | 6 | |
| Shutdown Input Leakage Current | SHDNILK | 0.5 | 2 | µA | SHDN = 16V | 6 | |
| PWRGD Input Voltage Operating Range | VPWRGD_VIN | 1.7 | V | ISINK = 1 mA | 6 | ||
| PWRGD Threshold Voltage (referenced to VOUT) | VPWRGD_TH | 90 | 92 | 94 | %VOUT | Falling edge of VOUT | 6 |
| PWRGD Threshold Hysteresis | VPWRGD_HYS | 2 | %VOUT | Rising edge of VOUT | 6 | ||
| PWRGD Output Voltage Low | VPWRGD_L | 0.2 | 0.6 | V | IPWRGD_SINK = 5.0 mA, VOUT = 0V | 6 | |
| PWRGD Output Sink Current | IPWRGD_L | 5 | mA | VPWRGD 0.4V | 6 | ||
| PWRGD Leakage Current | IPWRGD_LK | 40 | 700 | nA | VPWRGD pull-up = 10 k to VIN, VIN = 16V | 6 | |
| PWRGD Time Delay | TPG | 100 | µs | Rising Edge of VOUT, RPULLUP = 10 k | 6 | ||
| Detect Threshold to PWRGD Active Time Delay | TVDET_PWRGD | 200 | µs | Falling edge of VOUT after transition from VOUT = VPWRGD_TH + 50 mV to VPWRGD_TH, 50 mV, RPULLUP = 10 k to VIN | 7 | ||
| Output Delay from VIN to VOUT = 90% VREG | TDELAY | 240 | µs | VIN = 0V to 16V, VOUT = 90% VR, tr(VIN) = 5V/µs, COUT = 1 µF, SHDN = VIN | 7 | ||
| Output Delay from VIN to VOUT > 0.1V | TDELAY_START | 80 | µs | VIN = 0V to 16V, VOUT 0.1V, tr(VIN) = 5V/µs, SHDN = VIN | 7 | ||
| Output Delay from SHDN to VOUT = 90% VREG | TDELAY_SHDN | 160 | µs | VIN = 16V, VOUT = 90% VR, COUT = 1 µF, SHDN = GND to VIN | 7 | ||
| Output Noise | eN | 3 | µV/(Hz)1/2 | IL = 50 mA, f = 1 kHz, COUT = 1 µF | 7 | ||
| Power Supply Ripple Rejection Ratio | PSRR | 72 | dB | VR = 5V, f = 1 kHz, IL = 150 mA, VINAC = 1V pk-pk, CIN = 0 µF, VIN = VR + 1.5V | 7 | ||
| Thermal Shutdown Temperature | TSD | 150 | °C | Note 6 | 7 | ||
| Thermal Shutdown Hysteresis | TSD | 10 | °C | 7 | |||
| Specified Temperature Range | TA | -40 | 125 | °C | 8 | ||
| Operating Temperature Range | TJ | -40 | 150 | °C | 8 | ||
| Storage Temperature Range | TA | -55 | 150 | °C | 8 | ||
| Input Voltage Absolute Maximum | VIN | 17.6 | V | 5 | |||
| Output Voltage Absolute Maximum | VOUT | -0.3 | 5.5 | V | Relative to GND | 5 | |
| Maximum Junction Temperature | TJ | 165 | °C | Note 7 | 5 | ||
| Thermal Resistance, Junction to Ambient, SOT-23-5 | JA | 256 | °C/W | 8 | |||
| Thermal Resistance, Junction to Case, SOT-23-5 | JC | 81 | °C/W | 8 |
CAD (KiCad official)
- Symbol:
MCP1754T-3302E - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mcp1754t-3302e-etched.step/mcp1754t-3302e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1754t-3302e.step/mcp1754t-3302e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (47 pp, sha256
159e3586a7530eee, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).