main
History Download
Ray Publish 0.1.0 5195ed6

MCP1726T-ADJE

Microchip Tech · Power Management Specialized - PMIC · SOIC-8

MCP1726T-ADJE from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input voltage supply; a 1 µF to 10 µF input capacitor is typically sufficient, recommended if the source is several inches away or a battery.
2 VIN power_in Input voltage supply (second VIN pin, same function as pin 1); input operating range is 2.3V to 6.0V.
3 SHDN input Active-low shutdown control input: logic high enables the LDO output, logic low disables it and PWRGD goes low, with typical shutdown quiescent current of 0.1 µA.
4 GND power_in Ground; connect to a quiet circuit ground, and it conducts only the quiescent current (typically 140 µA).
5 PWRGD output Open-drain power good output that indicates the output is within 92% (typical) of nominal regulation, with 200 µs typical delay set by CDELAY.
6 CDELAY passive Power good delay set-point input; an external capacitor to ground adjusts the PWRGD delay from 200 µs (no capacitance) to 300 ms (0.1 µF).
7 ADJ input Output voltage sense input for the adjustable version; two external resistors (R2 10 kΩ to 200 kΩ) set VOUT with a typical ADJ voltage of 0.41V.
8 VOUT power_out Regulated output voltage, 0.8V to 5.0V adjustable, requiring a minimum 1.0 µF output capacitance for stability and supplying 1A.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Operating Voltage VIN 2.3 6 V Note 1 4
Input Quiescent Current Iq 140 220 µA IL = 0 mA, VIN = VR + 0.5V, VOUT = 0.8V to 5.0V 4
Input Quiescent Current for SHDN Mode ISHDN 0.1 3 µA SHDN = GND 4
Maximum Output Current IOUT 1 A VIN = 2.3V to 6.0V (Note 1) 4
Line Regulation ΔVOUT/(VOUT x ΔVIN) 0.05 0.3 %/V (VR + 0.5)V ≤ VIN ≤ 6V 4
Load Regulation ΔVOUT/VOUT -1.5 0.5 1.5 % IOUT = 1 mA to 1A, VIN = (VR + 0.6)V (Note 4) 4
Adjust Pin Reference Voltage VADJ 0.402 0.41 0.418 V VIN = 2.3V to VIN = 6.0V, IOUT = 1 mA 4
Adjust Pin Leakage Current IADJ -10 0.01 10 nA VIN = 6.0V, VADJ = 0V to 6V 4
Dropout Voltage VIN-VOUT 220 500 mV IOUT = 1A, VIN(MIN) = 2.3V (Note 5) 4
Input Voltage Operating Range for Valid PWRGD (25C) VPWRGD_VIN 1 6 V TA = +25°C, ISINK = 100 µA 5
Input Voltage Operating Range for Valid PWRGD (full temp) VPWRGD_VIN 1.2 6 V TA = -40°C to +125°C, ISINK = 100 µA 5
PWRGD Threshold Falling, VOUT < 2.5V PWRGD_THF 88 92 96 % VOUT < 2.5V, Falling Edge 5
PWRGD Threshold Falling, VOUT > 2.5V PWRGD_THF 89 92 95 % VOUT > 2.5V, Falling Edge 5
PWRGD Threshold Rising, VOUT < 2.5V PWRGD_THR 89 94 98 % VOUT < 2.5V, Rising Edge 5
PWRGD Threshold Rising, VOUT > 2.5V PWRGD_THR 90 93 96 % VOUT > 2.5V, Rising Edge 5
PWRGD Output Voltage Low VPWRGD_L 0.2 0.4 V IPWRGD SINK = 1.2 mA 5
PWRGD Time Delay TPG 10 30 55 ms CDELAY = 0.01 µF 5
Shutdown Logic-High Input VSHDN-HIGH 45 %VIN VIN = 2.3V to 6.0V 5
Shutdown Logic-Low Input VSHDN-LOW 15 %VIN VIN = 2.3V to 6.0V 5
SHDN Input Leakage Current SHDNILK -0.1 0.001 0.1 µA VIN = 6V, SHDN = VIN, SHDN = GND 5
Operating Junction Temperature Range TJ -40 125 °C Steady State 6
Maximum Junction Temperature (transient) TJ 150 °C Transient 6
Storage Temperature Range TA -65 150 °C 6
Maximum Junction Temperature TJ 150 °C 4
Storage Temperature -65 150 °C 4
Output Short-Circuit Current IOUT_SC 1.7 A VIN = (VR + 0.5)V, RLOAD < 0.1Ω, Peak Current 4
Adjust Temperature Coefficient TCVOUT 40 ppm/°C Note 3 4
PWRGD Time Delay TPG 200 µs CDELAY = OPEN 5
PWRGD Time Delay TPG 300 ms CDELAY = 0.1 µF 5
Output Delay from SHDN TOR 100 µs SHDN = GND to VIN, VOUT = GND to 95% VR 5
Output Noise eN 2 µV/√Hz IOUT = 200 mA, f = 1 kHz, COUT = 1 µF (X7R Ceramic), VOUT = 2.5V 5
Power Supply Ripple Rejection Ratio PSRR 54 dB f = 100 Hz, COUT = 10 µF, IOUT = 100 mA, VINAC = 30 mV pk-pk, CIN = 0 µF 5
Thermal Shutdown Temperature TSD 150 °C IOUT = 100 µA, VOUT = 1.8V, VIN = 2.8V 5
Thermal Shutdown Hysteresis TSD 10 °C IOUT = 100 µA, VOUT = 1.8V, VIN = 2.8V 5
Thermal Resistance, 8L SOIC junction-to-ambient θJA 163 °C/W 4-Layer JC51-7 Standard Board 6
Thermal Resistance, 8L SOIC junction-to-case θJC 42 °C/W 4-Layer JC51-7 Standard Board 6

CAD (KiCad official)

  • Symbol: MCP1726T-ADJE
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mcp1726t-adje-etched.step / mcp1726t-adje-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp1726t-adje.step / mcp1726t-adje.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (32 pp, sha256 913cb0f74fbdeae5, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF