Generated by kicad-footprint-generator · KiCad file format 20260206
MCP1726T-ADJE
Microchip Tech · Power Management Specialized - PMIC · SOIC-8
MCP1726T-ADJE from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage supply; a 1 µF to 10 µF input capacitor is typically sufficient, recommended if the source is several inches away or a battery. |
| 2 | VIN | power_in | Input voltage supply (second VIN pin, same function as pin 1); input operating range is 2.3V to 6.0V. |
| 3 | SHDN | input | Active-low shutdown control input: logic high enables the LDO output, logic low disables it and PWRGD goes low, with typical shutdown quiescent current of 0.1 µA. |
| 4 | GND | power_in | Ground; connect to a quiet circuit ground, and it conducts only the quiescent current (typically 140 µA). |
| 5 | PWRGD | output | Open-drain power good output that indicates the output is within 92% (typical) of nominal regulation, with 200 µs typical delay set by CDELAY. |
| 6 | CDELAY | passive | Power good delay set-point input; an external capacitor to ground adjusts the PWRGD delay from 200 µs (no capacitance) to 300 ms (0.1 µF). |
| 7 | ADJ | input | Output voltage sense input for the adjustable version; two external resistors (R2 10 kΩ to 200 kΩ) set VOUT with a typical ADJ voltage of 0.41V. |
| 8 | VOUT | power_out | Regulated output voltage, 0.8V to 5.0V adjustable, requiring a minimum 1.0 µF output capacitance for stability and supplying 1A. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 2.3 | 6 | V | Note 1 | 4 | |
| Input Quiescent Current | Iq | 140 | 220 | µA | IL = 0 mA, VIN = VR + 0.5V, VOUT = 0.8V to 5.0V | 4 | |
| Input Quiescent Current for SHDN Mode | ISHDN | 0.1 | 3 | µA | SHDN = GND | 4 | |
| Maximum Output Current | IOUT | 1 | A | VIN = 2.3V to 6.0V (Note 1) | 4 | ||
| Line Regulation | ΔVOUT/(VOUT x ΔVIN) | 0.05 | 0.3 | %/V | (VR + 0.5)V ≤ VIN ≤ 6V | 4 | |
| Load Regulation | ΔVOUT/VOUT | -1.5 | 0.5 | 1.5 | % | IOUT = 1 mA to 1A, VIN = (VR + 0.6)V (Note 4) | 4 |
| Adjust Pin Reference Voltage | VADJ | 0.402 | 0.41 | 0.418 | V | VIN = 2.3V to VIN = 6.0V, IOUT = 1 mA | 4 |
| Adjust Pin Leakage Current | IADJ | -10 | 0.01 | 10 | nA | VIN = 6.0V, VADJ = 0V to 6V | 4 |
| Dropout Voltage | VIN-VOUT | 220 | 500 | mV | IOUT = 1A, VIN(MIN) = 2.3V (Note 5) | 4 | |
| Input Voltage Operating Range for Valid PWRGD (25C) | VPWRGD_VIN | 1 | 6 | V | TA = +25°C, ISINK = 100 µA | 5 | |
| Input Voltage Operating Range for Valid PWRGD (full temp) | VPWRGD_VIN | 1.2 | 6 | V | TA = -40°C to +125°C, ISINK = 100 µA | 5 | |
| PWRGD Threshold Falling, VOUT < 2.5V | PWRGD_THF | 88 | 92 | 96 | % | VOUT < 2.5V, Falling Edge | 5 |
| PWRGD Threshold Falling, VOUT > 2.5V | PWRGD_THF | 89 | 92 | 95 | % | VOUT > 2.5V, Falling Edge | 5 |
| PWRGD Threshold Rising, VOUT < 2.5V | PWRGD_THR | 89 | 94 | 98 | % | VOUT < 2.5V, Rising Edge | 5 |
| PWRGD Threshold Rising, VOUT > 2.5V | PWRGD_THR | 90 | 93 | 96 | % | VOUT > 2.5V, Rising Edge | 5 |
| PWRGD Output Voltage Low | VPWRGD_L | 0.2 | 0.4 | V | IPWRGD SINK = 1.2 mA | 5 | |
| PWRGD Time Delay | TPG | 10 | 30 | 55 | ms | CDELAY = 0.01 µF | 5 |
| Shutdown Logic-High Input | VSHDN-HIGH | 45 | %VIN | VIN = 2.3V to 6.0V | 5 | ||
| Shutdown Logic-Low Input | VSHDN-LOW | 15 | %VIN | VIN = 2.3V to 6.0V | 5 | ||
| SHDN Input Leakage Current | SHDNILK | -0.1 | 0.001 | 0.1 | µA | VIN = 6V, SHDN = VIN, SHDN = GND | 5 |
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | Steady State | 6 | |
| Maximum Junction Temperature (transient) | TJ | 150 | °C | Transient | 6 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 6 | ||
| Maximum Junction Temperature | TJ | 150 | °C | 4 | |||
| Storage Temperature | -65 | 150 | °C | 4 | |||
| Output Short-Circuit Current | IOUT_SC | 1.7 | A | VIN = (VR + 0.5)V, RLOAD < 0.1Ω, Peak Current | 4 | ||
| Adjust Temperature Coefficient | TCVOUT | 40 | ppm/°C | Note 3 | 4 | ||
| PWRGD Time Delay | TPG | 200 | µs | CDELAY = OPEN | 5 | ||
| PWRGD Time Delay | TPG | 300 | ms | CDELAY = 0.1 µF | 5 | ||
| Output Delay from SHDN | TOR | 100 | µs | SHDN = GND to VIN, VOUT = GND to 95% VR | 5 | ||
| Output Noise | eN | 2 | µV/√Hz | IOUT = 200 mA, f = 1 kHz, COUT = 1 µF (X7R Ceramic), VOUT = 2.5V | 5 | ||
| Power Supply Ripple Rejection Ratio | PSRR | 54 | dB | f = 100 Hz, COUT = 10 µF, IOUT = 100 mA, VINAC = 30 mV pk-pk, CIN = 0 µF | 5 | ||
| Thermal Shutdown Temperature | TSD | 150 | °C | IOUT = 100 µA, VOUT = 1.8V, VIN = 2.8V | 5 | ||
| Thermal Shutdown Hysteresis | TSD | 10 | °C | IOUT = 100 µA, VOUT = 1.8V, VIN = 2.8V | 5 | ||
| Thermal Resistance, 8L SOIC junction-to-ambient | θJA | 163 | °C/W | 4-Layer JC51-7 Standard Board | 6 | ||
| Thermal Resistance, 8L SOIC junction-to-case | θJC | 42 | °C/W | 4-Layer JC51-7 Standard Board | 6 |
CAD (KiCad official)
- Symbol:
MCP1726T-ADJE - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mcp1726t-adje-etched.step/mcp1726t-adje-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1726t-adje.step/mcp1726t-adje.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (32 pp, sha256
913cb0f74fbdeae5, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).