main
Ray Publish 0.1.0 7b3004b

MCP1703AT-1802E

Microchip Tech · Power Management Specialized - PMIC · SOT-23A-3

MCP1703AT-1802E from Microchip Tech, in a SOT-23A-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Regulator ground; tie to the negative side of the output and input capacitors, only the LDO bias current (2.0 µA typical) flows out of this pin and output regulation is referenced to it.
2 VOUT power_out Regulated voltage output; connect to the positive side of the load and output capacitor (1.0 µF to 22 µF ceramic), with current out equal to the DC load current (up to 250 mA for VR ≥ 2.5V, 200 mA for VR < 2.5V).
3 VIN power_in Unregulated input supply voltage, 2.7V to 16.0V operating range; needs low source impedance, with 1 µF of capacitance typically ensuring stable operation.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23A-3
Category Power Supply Chip
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Operating Voltage VIN 2.7 16 V Note 1 3
Input Quiescent Current Iq 2 5 µA IL = 0 mA 3
Maximum Output Current IOUT 50 100 mA For VR < 2.5V, VIN ≥ 2.7V 3
Maximum Output Current IOUT 100 130 mA For VR < 2.5V, VIN ≥ 2.95V 3
Maximum Output Current IOUT 150 200 mA For VR < 2.5V, VIN ≥ 3.2V 3
Maximum Output Current IOUT 200 230 mA For VR < 2.5V, VIN ≥ 3.45V 3
Output Voltage Tolerance (2.0% grade) VOUT -2 0.4 2 % VR-2.0% to VR+2.0%, typ VR±0.4%; Note 2 3
Line Regulation DVOUT/(VOUTxΔVIN) -0.3 0.1 0.3 %/V (VOUT(MAX) + VDROPOUT(MAX)) ≤ VIN ≤ 16V, Note 1; typ ±0.1 3
Load Regulation ΔVOUT/VOUT -2.5 1 2.5 % IL = 1.0 mA to 200 mA for VR < 2.5V, VIN = 3.65V, Note 4; typ ±1.0 3
Operating Junction Temperature Range TJ -40 125 °C Steady State 4
Supply Voltage VDD 18 V 3
Storage Temperature -65 150 °C 3
Maximum Junction Temperature TJ 150 °C Transient 4
ESD protection on all pins (HBM) 4 kV HBM; MM ≥ 400V 3
Thermal Resistance, junction to ambient, 3LD SOT-23A θJA 336 °C/W EIA/JEDEC JESD51-7 FR-4 0.063 4-Layer Board 4
Thermal Resistance, junction to case, 3LD SOT-23A θJC 110 °C/W EIA/JEDEC JESD51-7 FR-4 0.063 4-Layer Board 4
Output Short Circuit Current IOUT_SC 400 mA VIN = VIN(MIN) (Note 1), VOUT = GND, average current measured 10 ms after short is applied 3
VOUT Temperature Coefficient TCVOUT 65 ppm/°C Note 3 3
Output Delay Time TDELAY 600 µs VIN = 0V to 6V, VOUT = 90% VR, RL = 50Ω resistive 4
Output Noise eN 1 µV/(Hz)1/2 IL = 50 mA, f = 1 kHz, COUT = 1 µF 4
Power Supply Ripple Rejection Ratio PSRR 35 dB f = 100 Hz, COUT = 1 µF, IL = 10 mA, VINAC = 200 mV pk-pk, CIN = 0 µF, VR = 5.0V 4
Thermal Shutdown Protection TSD 150 °C 4

CAD (KiCad official)

  • Symbol: MCP1703AT-1802E
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23A-3 (KiCad packages3D, STEP)
  • 3D model files: mcp1703at-1802e-etched.step / mcp1703at-1802e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp1703at-1802e.step / mcp1703at-1802e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (31 pp, sha256 ee4e9c3b0b2c09bb, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF