Generated by kicad-footprint-generator · KiCad file format 20260206
MCP1703AT-1802E
Microchip Tech · Power Management Specialized - PMIC · SOT-23A-3
MCP1703AT-1802E from Microchip Tech, in a SOT-23A-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Regulator ground; tie to the negative side of the output and input capacitors, only the LDO bias current (2.0 µA typical) flows out of this pin and output regulation is referenced to it. |
| 2 | VOUT | power_out | Regulated voltage output; connect to the positive side of the load and output capacitor (1.0 µF to 22 µF ceramic), with current out equal to the DC load current (up to 250 mA for VR ≥ 2.5V, 200 mA for VR < 2.5V). |
| 3 | VIN | power_in | Unregulated input supply voltage, 2.7V to 16.0V operating range; needs low source impedance, with 1 µF of capacitance typically ensuring stable operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23A-3 |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 2.7 | 16 | V | Note 1 | 3 | |
| Input Quiescent Current | Iq | 2 | 5 | µA | IL = 0 mA | 3 | |
| Maximum Output Current | IOUT | 50 | 100 | mA | For VR < 2.5V, VIN ≥ 2.7V | 3 | |
| Maximum Output Current | IOUT | 100 | 130 | mA | For VR < 2.5V, VIN ≥ 2.95V | 3 | |
| Maximum Output Current | IOUT | 150 | 200 | mA | For VR < 2.5V, VIN ≥ 3.2V | 3 | |
| Maximum Output Current | IOUT | 200 | 230 | mA | For VR < 2.5V, VIN ≥ 3.45V | 3 | |
| Output Voltage Tolerance (2.0% grade) | VOUT | -2 | 0.4 | 2 | % | VR-2.0% to VR+2.0%, typ VR±0.4%; Note 2 | 3 |
| Line Regulation | DVOUT/(VOUTxΔVIN) | -0.3 | 0.1 | 0.3 | %/V | (VOUT(MAX) + VDROPOUT(MAX)) ≤ VIN ≤ 16V, Note 1; typ ±0.1 | 3 |
| Load Regulation | ΔVOUT/VOUT | -2.5 | 1 | 2.5 | % | IL = 1.0 mA to 200 mA for VR < 2.5V, VIN = 3.65V, Note 4; typ ±1.0 | 3 |
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | Steady State | 4 | |
| Supply Voltage | VDD | 18 | V | 3 | |||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Maximum Junction Temperature | TJ | 150 | °C | Transient | 4 | ||
| ESD protection on all pins (HBM) | 4 | kV | HBM; MM ≥ 400V | 3 | |||
| Thermal Resistance, junction to ambient, 3LD SOT-23A | θJA | 336 | °C/W | EIA/JEDEC JESD51-7 FR-4 0.063 4-Layer Board | 4 | ||
| Thermal Resistance, junction to case, 3LD SOT-23A | θJC | 110 | °C/W | EIA/JEDEC JESD51-7 FR-4 0.063 4-Layer Board | 4 | ||
| Output Short Circuit Current | IOUT_SC | 400 | mA | VIN = VIN(MIN) (Note 1), VOUT = GND, average current measured 10 ms after short is applied | 3 | ||
| VOUT Temperature Coefficient | TCVOUT | 65 | ppm/°C | Note 3 | 3 | ||
| Output Delay Time | TDELAY | 600 | µs | VIN = 0V to 6V, VOUT = 90% VR, RL = 50Ω resistive | 4 | ||
| Output Noise | eN | 1 | µV/(Hz)1/2 | IL = 50 mA, f = 1 kHz, COUT = 1 µF | 4 | ||
| Power Supply Ripple Rejection Ratio | PSRR | 35 | dB | f = 100 Hz, COUT = 1 µF, IL = 10 mA, VINAC = 200 mV pk-pk, CIN = 0 µF, VR = 5.0V | 4 | ||
| Thermal Shutdown Protection | TSD | 150 | °C | 4 |
CAD (KiCad official)
- Symbol:
MCP1703AT-1802E - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23A-3 (KiCad packages3D, STEP)
- 3D model files:
mcp1703at-1802e-etched.step/mcp1703at-1802e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1703at-1802e.step/mcp1703at-1802e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (31 pp, sha256
ee4e9c3b0b2c09bb, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).