main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mcp1702t-3602e: viewers · Ray
mcp1702t-3602e-etched.glb Publish 0.1.0 · Ray
mcp1702t-3602e-etched.step mcp1702t-3602e: factory component page (tier=mfr) · Ray
mcp1702t-3602e-hero.glb mcp1702t-3602e: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp1702t-3602e-hero.overlay.json Publish 0.1.0 · Ray
mcp1702t-3602e.glb Publish 0.1.0 · Ray
mcp1702t-3602e.kicad_mod Publish 0.1.0 · Ray
mcp1702t-3602e.kicad_sym Publish 0.1.0 · Ray
mcp1702t-3602e.lbr Publish 0.1.0 · Ray
mcp1702t-3602e.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

MCP1702T-3602E

Microchip Tech · Power Management Specialized - PMIC · SOT-23A-3

MCP1702T-3602E from Microchip Tech, in a SOT-23A-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Regulator ground; tie to the negative side of the output and input capacitors, only the 2.0 µA typical LDO bias current flows out of this pin and output regulation is referenced to it.
2 VOUT power_out Regulated voltage output; connect to the positive side of the load and output capacitor (1.0 µF to 22 µF), delivering up to 250 mA for VOUT ≥ 2.5V.
3 VIN power_in Unregulated supply input, 2.7V to 13.2V operating range; requires low source impedance, typically 1 µF capacitance for stable operation.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23A-3
Category Power Management
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Regulation (2.0% grade) VOUT -2 0.4 2 % Note 2; VR-2.0% to VR+2.0%, typ VR±0.4% 3
Input Operating Voltage VIN 2.7 13.2 V Note 1 3
Input Quiescent Current Iq 2 5 µA IL = 0 mA 3
Maximum Output Current IOUT_mA 250 mA For VR ≥ 2.5V 3
Line Regulation ΔVOUT/(VOUT×ΔVIN) -0.3 0.1 0.3 %/V (VOUT(MAX) + VDROPOUT(MAX)) ≤ VIN ≤ 13.2V, (Note 1) 3
Load Regulation ΔVOUT/VOUT -2.5 1 2.5 % IL = 1.0 mA to 250 mA for VR ≥ 2.5V 3
Dropout Voltage VDROPOUT 525 725 mV IL = 250 mA, 3.3V ≤ VR < 5.0V 4
Output Short Circuit Current IOUT_SC 400 mA VIN = VIN(MIN) (Note 1), VOUT = GND, average current measured 10 ms after short is applied 3
VOUT Temperature Coefficient TCVOUT 50 ppm/°C Note 3 3
Output Delay Time TDELAY 1000 µs VIN = 0V to 6V, VOUT = 90% VR, RL = 50 Ω resistive 4
Output Noise eN 8 µV/√Hz IL = 50 mA, f = 1 kHz, COUT = 1 µF 4
Power Supply Ripple Rejection Ratio PSRR 44 dB f = 100 Hz, COUT = 1 µF, IL = 50 mA, VINAC = 100 mV pk-pk, CIN = 0 µF, VR = 1.2V 4
Thermal Shutdown Protection TSD 150 °C 4
Operating Junction Temperature Range TJ -40 125 °C Steady State 5
Maximum Supply Voltage VDD 14.5 V 3
Maximum Junction Temperature TJ 150 °C 3
Storage Temperature -65 150 °C 3
ESD protection on all pins (HBM) 4 kV HBM; MM is 400V 3
Thermal Resistance, 3L-SOT-23A junction to ambient θJA 336 °C/W EIA/JEDEC JESD51-7 FR-4 0.063 4-Layer Board 5
Thermal Resistance, 3L-SOT-23A junction to case θJC 110 °C/W EIA/JEDEC JESD51-7 FR-4 0.063 4-Layer Board 5

CAD (KiCad official)

  • Symbol: MCP1702T-3602E
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23A-3 (KiCad packages3D, STEP)
  • 3D model files: mcp1702t-3602e-etched.step / mcp1702t-3602e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp1702t-3602e.step / mcp1702t-3602e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (26 pp, sha256 eebbb32821ad97ab, retrieved 2026-10-27, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF