3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMCP1702T-3602E
Microchip Tech · Power Management Specialized - PMIC · SOT-23A-3
MCP1702T-3602E from Microchip Tech, in a SOT-23A-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Regulator ground; tie to the negative side of the output and input capacitors, only the 2.0 µA typical LDO bias current flows out of this pin and output regulation is referenced to it. |
| 2 | VOUT | power_out | Regulated voltage output; connect to the positive side of the load and output capacitor (1.0 µF to 22 µF), delivering up to 250 mA for VOUT ≥ 2.5V. |
| 3 | VIN | power_in | Unregulated supply input, 2.7V to 13.2V operating range; requires low source impedance, typically 1 µF capacitance for stable operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23A-3 |
| Category | Power Management |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Regulation (2.0% grade) | VOUT | -2 | 0.4 | 2 | % | Note 2; VR-2.0% to VR+2.0%, typ VR±0.4% | 3 |
| Input Operating Voltage | VIN | 2.7 | 13.2 | V | Note 1 | 3 | |
| Input Quiescent Current | Iq | 2 | 5 | µA | IL = 0 mA | 3 | |
| Maximum Output Current | IOUT_mA | 250 | mA | For VR ≥ 2.5V | 3 | ||
| Line Regulation | ΔVOUT/(VOUT×ΔVIN) | -0.3 | 0.1 | 0.3 | %/V | (VOUT(MAX) + VDROPOUT(MAX)) ≤ VIN ≤ 13.2V, (Note 1) | 3 |
| Load Regulation | ΔVOUT/VOUT | -2.5 | 1 | 2.5 | % | IL = 1.0 mA to 250 mA for VR ≥ 2.5V | 3 |
| Dropout Voltage | VDROPOUT | 525 | 725 | mV | IL = 250 mA, 3.3V ≤ VR < 5.0V | 4 | |
| Output Short Circuit Current | IOUT_SC | 400 | mA | VIN = VIN(MIN) (Note 1), VOUT = GND, average current measured 10 ms after short is applied | 3 | ||
| VOUT Temperature Coefficient | TCVOUT | 50 | ppm/°C | Note 3 | 3 | ||
| Output Delay Time | TDELAY | 1000 | µs | VIN = 0V to 6V, VOUT = 90% VR, RL = 50 Ω resistive | 4 | ||
| Output Noise | eN | 8 | µV/√Hz | IL = 50 mA, f = 1 kHz, COUT = 1 µF | 4 | ||
| Power Supply Ripple Rejection Ratio | PSRR | 44 | dB | f = 100 Hz, COUT = 1 µF, IL = 50 mA, VINAC = 100 mV pk-pk, CIN = 0 µF, VR = 1.2V | 4 | ||
| Thermal Shutdown Protection | TSD | 150 | °C | 4 | |||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | Steady State | 5 | |
| Maximum Supply Voltage | VDD | 14.5 | V | 3 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 3 | |||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| ESD protection on all pins (HBM) | 4 | kV | HBM; MM is 400V | 3 | |||
| Thermal Resistance, 3L-SOT-23A junction to ambient | θJA | 336 | °C/W | EIA/JEDEC JESD51-7 FR-4 0.063 4-Layer Board | 5 | ||
| Thermal Resistance, 3L-SOT-23A junction to case | θJC | 110 | °C/W | EIA/JEDEC JESD51-7 FR-4 0.063 4-Layer Board | 5 |
CAD (KiCad official)
- Symbol:
MCP1702T-3602E - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23A-3 (KiCad packages3D, STEP)
- 3D model files:
mcp1702t-3602e-etched.step/mcp1702t-3602e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1702t-3602e.step/mcp1702t-3602e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (26 pp, sha256
eebbb32821ad97ab, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).