main
Ray
Publish 0.1.0
c2c7439
MCP1702-1802E
Microchip Tech · Power Management Specialized - PMIC · TO-92-3
MCP1702-1802E from Microchip Tech, in a TO-92-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Regulator ground that must be tied to the negative side of the output and input capacitors; only the LDO bias current (2.0 µA typical) flows out of this pin, and the output regulation is referenced to it. |
| 2 | VIN | power_in | Unregulated supply input that needs a low source impedance for stable operation, with about 1 µF of capacitance sufficing for most applications and a lower capacitance allowed for load currents below 100 mA. |
| 3 | VOUT | power_out | Regulated output where the DC load current flows out of the pin, and the positive terminal of the output capacitor should be placed as close to this pin as practical. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TO-92-3 |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 2.7 | 13.2 | V | Note 1 | 3 | |
| Input Quiescent Current | Iq | 2 | 5 | µA | IL = 0 mA | 3 | |
| Maximum Output Current | IOUT_mA | 50 | 100 | mA | For VR < 2.5V, VIN ≥ 2.7V | 3 | |
| Maximum Output Current | IOUT_mA | 100 | 130 | mA | For VR < 2.5V, VIN ≥ 2.95V | 3 | |
| Maximum Output Current | IOUT_mA | 150 | 200 | mA | For VR < 2.5V, VIN ≥ 3.2V | 3 | |
| Maximum Output Current | IOUT_mA | 200 | 250 | mA | For VR < 2.5V, VIN ≥ 3.45V | 3 | |
| Output Voltage Regulation (2.0% tolerance option, decoded from MPN tolerance code 2) | VOUT | -2 | 0.4 | 2 | % | Note 2 (VR = nominal output voltage; IOUT = 100 µA) | 3 |
| Line Regulation | VOUT/(VOUT×VIN) | -0.3 | 0.1 | 0.3 | %/V | (VOUT(MAX) + VDROPOUT(MAX)) ≤ VIN ≤ 13.2V, (Note 1) | 3 |
| Load Regulation | VOUT/VOUT | -2.5 | 1 | 2.5 | % | IL = 1.0 mA to 200 mA for VR < 2.5V, VIN = 3.45V (Note 4) | 3 |
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | Steady State | 5 | |
| Maximum Junction Temperature | TJ | 150 | °C | Transient | 5 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 5 | ||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Maximum Junction Temperature | 150 | °C | 3 | ||||
| VDD (supply voltage absolute maximum) | VDD | 14.5 | V | 3 | |||
| ESD protection, HBM | 4 | kV | All pins, HBM | 3 | |||
| ESD protection, MM | 400 | V | All pins, MM | 3 | |||
| Thermal Resistance, junction to ambient (3L-TO-92) | JA | 131.9 | °C/W | 5 | |||
| Thermal Resistance, junction to case (3L-TO-92) | JC | 66.3 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
MCP1702-1802E - Footprint:
Package_TO_SOT_THT:TO-92_Inline - 3D model: TO-92-3 (KiCad packages3D, STEP)
- 3D model files:
mcp1702-1802e-etched.step/mcp1702-1802e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1702-1802e.step/mcp1702-1802e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (26 pp, sha256
eebbb32821ad97ab, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP1702-1802E
**Microchip Tech** · Power Management Specialized - PMIC · TO-92-3
MCP1702-1802E from Microchip Tech, in a TO-92-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Regulator ground that must be tied to the negative side of the output and input capacitors; only the LDO bias current (2.0 µA typical) flows out of this pin, and the output regulation is referenced to it. |
| 2 | VIN | power_in | Unregulated supply input that needs a low source impedance for stable operation, with about 1 µF of capacitance sufficing for most applications and a lower capacitance allowed for load currents below 100 mA. |
| 3 | VOUT | power_out | Regulated output where the DC load current flows out of the pin, and the positive terminal of the output capacitor should be placed as close to this pin as practical. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TO-92-3 |
| Category | Power Supply Chip |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 2.7 | | 13.2 | V | Note 1 | 3 |
| Input Quiescent Current | Iq | | 2 | 5 | µA | IL = 0 mA | 3 |
| Maximum Output Current | IOUT_mA | 50 | 100 | | mA | For VR < 2.5V, VIN ≥ 2.7V | 3 |
| Maximum Output Current | IOUT_mA | 100 | 130 | | mA | For VR < 2.5V, VIN ≥ 2.95V | 3 |
| Maximum Output Current | IOUT_mA | 150 | 200 | | mA | For VR < 2.5V, VIN ≥ 3.2V | 3 |
| Maximum Output Current | IOUT_mA | 200 | 250 | | mA | For VR < 2.5V, VIN ≥ 3.45V | 3 |
| Output Voltage Regulation (2.0% tolerance option, decoded from MPN tolerance code 2) | VOUT | -2 | 0.4 | 2 | % | Note 2 (VR = nominal output voltage; IOUT = 100 µA) | 3 |
| Line Regulation | VOUT/(VOUT×VIN) | -0.3 | 0.1 | 0.3 | %/V | (VOUT(MAX) + VDROPOUT(MAX)) ≤ VIN ≤ 13.2V, (Note 1) | 3 |
| Load Regulation | VOUT/VOUT | -2.5 | 1 | 2.5 | % | IL = 1.0 mA to 200 mA for VR < 2.5V, VIN = 3.45V (Note 4) | 3 |
| Operating Junction Temperature Range | TJ | -40 | | 125 | °C | Steady State | 5 |
| Maximum Junction Temperature | TJ | | | 150 | °C | Transient | 5 |
| Storage Temperature Range | TA | -65 | | 150 | °C | | 5 |
| Storage Temperature | | -65 | | 150 | °C | | 3 |
| Maximum Junction Temperature | | | | 150 | °C | | 3 |
| VDD (supply voltage absolute maximum) | VDD | | | 14.5 | V | | 3 |
| ESD protection, HBM | | | | 4 | kV | All pins, HBM | 3 |
| ESD protection, MM | | | | 400 | V | All pins, MM | 3 |
| Thermal Resistance, junction to ambient (3L-TO-92) | JA | | 131.9 | | °C/W | | 5 |
| Thermal Resistance, junction to case (3L-TO-92) | JC | | 66.3 | | °C/W | | 5 |
## CAD (KiCad official)
- Symbol: `MCP1702-1802E`
- Footprint: `Package_TO_SOT_THT:TO-92_Inline`
- 3D model: TO-92-3 (KiCad packages3D, STEP)
- 3D model files: `mcp1702-1802e-etched.step` / `mcp1702-1802e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp1702-1802e.step` / `mcp1702-1802e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mcp1702-1802e-datasheet.pdf) (26 pp, sha256 `eebbb32821ad97ab`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp1702-1802e-datasheet.pdf)