main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mcp1702-1802e: viewers · Ray
mcp1702-1802e-etched.glb Publish 0.1.0 · Ray
mcp1702-1802e-etched.step mcp1702-1802e: factory component page (tier=mfr) · Ray
mcp1702-1802e-hero.glb mcp1702-1802e: pin labels beside their pads (component-hero#2, hero_glb a625f4b) · Ray
mcp1702-1802e-hero.overlay.json mcp1702-1802e: pin labels beside their pads (component-hero#2, hero_glb a625f4b) · Ray
mcp1702-1802e.glb Publish 0.1.0 · Ray
mcp1702-1802e.kicad_mod Publish 0.1.0 · Ray
mcp1702-1802e.kicad_sym Publish 0.1.0 · Ray
mcp1702-1802e.lbr Publish 0.1.0 · Ray
mcp1702-1802e.step Publish 0.1.0 · Ray
package.json Publish 0.1.2 · Ray
page.json Publish 0.1.2 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 3 pins · Ray

MCP1702-1802E

Microchip Tech · Power Management Specialized - PMIC · TO-92-3

MCP1702-1802E from Microchip Tech, in a TO-92-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Regulator ground that must be tied to the negative side of the output and input capacitors; only the LDO bias current (2.0 µA typical) flows out of this pin, and the output regulation is referenced to it.
2 VIN power_in Unregulated supply input that needs a low source impedance for stable operation, with about 1 µF of capacitance sufficing for most applications and a lower capacitance allowed for load currents below 100 mA.
3 VOUT power_out Regulated output where the DC load current flows out of the pin, and the positive terminal of the output capacitor should be placed as close to this pin as practical.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TO-92-3
Category Power Supply Chip
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Operating Voltage VIN 2.7 13.2 V Note 1 3
Input Quiescent Current Iq 2 5 µA IL = 0 mA 3
Maximum Output Current IOUT_mA 50 100 mA For VR < 2.5V, VIN ≥ 2.7V 3
Maximum Output Current IOUT_mA 100 130 mA For VR < 2.5V, VIN ≥ 2.95V 3
Maximum Output Current IOUT_mA 150 200 mA For VR < 2.5V, VIN ≥ 3.2V 3
Maximum Output Current IOUT_mA 200 250 mA For VR < 2.5V, VIN ≥ 3.45V 3
Output Voltage Regulation (2.0% tolerance option, decoded from MPN tolerance code 2) VOUT -2 0.4 2 % Note 2 (VR = nominal output voltage; IOUT = 100 µA) 3
Line Regulation VOUT/(VOUT×VIN) -0.3 0.1 0.3 %/V (VOUT(MAX) + VDROPOUT(MAX)) ≤ VIN ≤ 13.2V, (Note 1) 3
Load Regulation VOUT/VOUT -2.5 1 2.5 % IL = 1.0 mA to 200 mA for VR < 2.5V, VIN = 3.45V (Note 4) 3
Operating Junction Temperature Range TJ -40 125 °C Steady State 5
Maximum Junction Temperature TJ 150 °C Transient 5
Storage Temperature Range TA -65 150 °C 5
Storage Temperature -65 150 °C 3
Maximum Junction Temperature 150 °C 3
VDD (supply voltage absolute maximum) VDD 14.5 V 3
ESD protection, HBM 4 kV All pins, HBM 3
ESD protection, MM 400 V All pins, MM 3
Thermal Resistance, junction to ambient (3L-TO-92) JA 131.9 °C/W 5
Thermal Resistance, junction to case (3L-TO-92) JC 66.3 °C/W 5

CAD (KiCad official)

  • Symbol: MCP1702-1802E
  • Footprint: Package_TO_SOT_THT:TO-92_Inline
  • 3D model: TO-92-3 (KiCad packages3D, STEP)
  • 3D model files: mcp1702-1802e-etched.step / mcp1702-1802e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp1702-1802e.step / mcp1702-1802e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (26 pp, sha256 eebbb32821ad97ab, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF