Generated by kicad-footprint-generator · KiCad file format 20260206
MCP1642B-33I/MS
Microchip Tech · DC-DC Converters · MSOP-8
MCP1642B-33I from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable logic input: >75% of VIN enables the regulator, <20% of VIN disables it, and the pin must not be left floating. |
| 2 | NC | unconnected | Not connected on the fixed-VOUT options (this position is VFB only on the ADJ option). |
| 3 | PG | output | Open-drain Power Good output that can be pulled up to VOUT and goes low when VOUT drops below 10% of its nominal value. |
| 4 | VOUT | power_out | Boost converter output connecting the integrated P-channel MOSFET to the output capacitor. |
| 5 | SW | passive | Boost and rectifier switch node where the inductor from VIN connects, carrying up to 1.8A peak inductor current. |
| 6 | PGND | power_in | Power ground return for the high-current N-channel switch, connected externally to SGND. |
| 7 | SGND | power_in | Signal ground return for the internal VREF and error amplifier, connected externally to PGND. |
| 8 | VIN | power_in | Input supply voltage pin requiring a local bypass capacitor of 4.7 µF minimum to ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy (MCP1642B/D-33) | VOUT% | -3 | 3 | % | MCP1642B/D-33, VIN = 1.2V | 4 | |
| Line Regulation (MCP1642B/D-33) | ΔVOUT/VOUT/ΔVIN | -0.5 | 0.01 | 0.5 | %/V | MCP1642B/D-33, VIN = 1.5V to 3.0V, IOUT = 25 mA | 4 |
| Load Regulation (MCP1642B/D-33) | ΔVOUT/VOUT | -1.5 | 0.1 | 1.5 | % | MCP1642B/D-33, VIN = 1.5V, IOUT = 25 mA to 150 mA | 4 |
| Minimum Start-Up Voltage | VIN | 0.65 | 0.8 | V | Note 1 (resistive load, 1 mA) | 3 | |
| Quiescent Current - PWM Mode | IQPWM | 400 | 500 | µA | Measured at VOUT, EN = VIN, IOUT = 0 mA, Note 3 | 4 | |
| Switching Frequency | fSW | 0.85 | 1 | 1.15 | MHz | Note 5, IOUT = 65 mA | 5 |
| EN Input Logic High | VIH | 75 | % of VIN | IOUT = 1 mA | 5 | ||
| EN Input Logic Low | VIL | 20 | % of VIN | IOUT = 1 mA | 5 | ||
| Power Good Input Voltage Operating Range | VPG_VIN | 0.9 | 5.5 | V | ISINK = 5 mA, VFB = 0V, Note 5 | 5 | |
| Output Voltage (MCP1642B-33) | VOUT | 3.3 | V | VIN < 3.3V, MCP1642B/D-33, Note 2 | 3 | ||
| Quiescent Current - Shutdown | IQSHDN | 1 | µA | VOUT = EN = GND, IOUT = 0 mA | 4 | ||
| NMOS Peak Switch Current Limit | IN(MAX) | 1.8 | A | Note 5 | 4 | ||
| Maximum Duty Cycle | DCMAX | 90 | % | Note 5 | 5 | ||
| Soft Start Time | tSS | 550 | µs | EN Low to High, 90% of VOUT, Note 4, Note 5 | 5 | ||
| EN, FB, VIN, VSW, VOUT to GND | 6.5 | V | 3 | ||||
| Output Current Bypass Mode | 800 | mA | 3 | ||||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Ambient Temp. with Power Applied | -40 | 85 | °C | 3 | |||
| Operating Junction Temperature | -40 | 125 | °C | 3 | |||
| ESD HBM | 4 | kV | All pins | 3 | |||
| ESD MM | 300 | V | All pins | 3 | |||
| Operating Ambient Temperature Range | TA | -40 | 85 | °C | Steady State | 5 | |
| Maximum Junction Temperature | TJ | 150 | °C | Transient | 5 | ||
| Input Capacitor | CIN | 4.7 | µF | Table 5-1 | 18 | ||
| Output Capacitor | COUT | 10 | 100 | µF | Table 5-1 | 18 | |
| Thermal Resistance, 8L-MSOP | θJA | 211 | °C/W | 5 | |||
| Thermal Shutdown Die Temperature | TSD | 150 | °C | Note 5 | 5 |
CAD (KiCad official)
- Symbol:
MCP1642B-33I - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
mcp1642b-33i-etched.step/mcp1642b-33i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1642b-33i.step/mcp1642b-33i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (32 pp, sha256
b4f111cdac10d1c3, retrieved 2026-10-26, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is MCP1642B-33I/MS. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- MCP1642B-33I/MC