Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP1642B-33I/MS

Microchip Tech · DC-DC Converters · MSOP-8

MCP1642B-33I from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable logic input: >75% of VIN enables the regulator, <20% of VIN disables it, and the pin must not be left floating.
2 NC unconnected Not connected on the fixed-VOUT options (this position is VFB only on the ADJ option).
3 PG output Open-drain Power Good output that can be pulled up to VOUT and goes low when VOUT drops below 10% of its nominal value.
4 VOUT power_out Boost converter output connecting the integrated P-channel MOSFET to the output capacitor.
5 SW passive Boost and rectifier switch node where the inductor from VIN connects, carrying up to 1.8A peak inductor current.
6 PGND power_in Power ground return for the high-current N-channel switch, connected externally to SGND.
7 SGND power_in Signal ground return for the internal VREF and error amplifier, connected externally to PGND.
8 VIN power_in Input supply voltage pin requiring a local bypass capacitor of 4.7 µF minimum to ground.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Accuracy (MCP1642B/D-33) VOUT% -3 3 % MCP1642B/D-33, VIN = 1.2V 4
Line Regulation (MCP1642B/D-33) ΔVOUT/VOUT/ΔVIN -0.5 0.01 0.5 %/V MCP1642B/D-33, VIN = 1.5V to 3.0V, IOUT = 25 mA 4
Load Regulation (MCP1642B/D-33) ΔVOUT/VOUT -1.5 0.1 1.5 % MCP1642B/D-33, VIN = 1.5V, IOUT = 25 mA to 150 mA 4
Minimum Start-Up Voltage VIN 0.65 0.8 V Note 1 (resistive load, 1 mA) 3
Quiescent Current - PWM Mode IQPWM 400 500 µA Measured at VOUT, EN = VIN, IOUT = 0 mA, Note 3 4
Switching Frequency fSW 0.85 1 1.15 MHz Note 5, IOUT = 65 mA 5
EN Input Logic High VIH 75 % of VIN IOUT = 1 mA 5
EN Input Logic Low VIL 20 % of VIN IOUT = 1 mA 5
Power Good Input Voltage Operating Range VPG_VIN 0.9 5.5 V ISINK = 5 mA, VFB = 0V, Note 5 5
Output Voltage (MCP1642B-33) VOUT 3.3 V VIN < 3.3V, MCP1642B/D-33, Note 2 3
Quiescent Current - Shutdown IQSHDN 1 µA VOUT = EN = GND, IOUT = 0 mA 4
NMOS Peak Switch Current Limit IN(MAX) 1.8 A Note 5 4
Maximum Duty Cycle DCMAX 90 % Note 5 5
Soft Start Time tSS 550 µs EN Low to High, 90% of VOUT, Note 4, Note 5 5
EN, FB, VIN, VSW, VOUT to GND 6.5 V 3
Output Current Bypass Mode 800 mA 3
Storage Temperature -65 150 °C 3
Ambient Temp. with Power Applied -40 85 °C 3
Operating Junction Temperature -40 125 °C 3
ESD HBM 4 kV All pins 3
ESD MM 300 V All pins 3
Operating Ambient Temperature Range TA -40 85 °C Steady State 5
Maximum Junction Temperature TJ 150 °C Transient 5
Input Capacitor CIN 4.7 µF Table 5-1 18
Output Capacitor COUT 10 100 µF Table 5-1 18
Thermal Resistance, 8L-MSOP θJA 211 °C/W 5
Thermal Shutdown Die Temperature TSD 150 °C Note 5 5

CAD (KiCad official)

  • Symbol: MCP1642B-33I
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: mcp1642b-33i-etched.step / mcp1642b-33i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp1642b-33i.step / mcp1642b-33i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (32 pp, sha256 b4f111cdac10d1c3, retrieved 2026-10-26, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is MCP1642B-33I/MS. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • MCP1642B-33I/MC