main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mcp14a0454t-e: viewers · Ray
mcp14a0454t-e-etched.glb Publish 0.1.0 · Ray
mcp14a0454t-e-etched.step mcp14a0454t-e: factory component page (tier=mfr) · Ray
mcp14a0454t-e-hero.glb mcp14a0454t-e: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp14a0454t-e-hero.overlay.json Publish 0.1.0 · Ray
mcp14a0454t-e.glb Publish 0.1.0 · Ray
mcp14a0454t-e.kicad_mod Publish 0.1.0 · Ray
mcp14a0454t-e.kicad_sym Publish 0.1.0 · Ray
mcp14a0454t-e.lbr Publish 0.1.0 · Ray
mcp14a0454t-e.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

MCP14A0454T-E

Microchip Tech · Gate Drive ICs · SOIC-8

MCP14A0454T-E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ENA input Active-high enable for Driver A; driving it below threshold forces OUTA low regardless of INA, and an internal pull-up lets it float for normal operation.
2 INA input High-impedance, low-threshold control input for Driver A with hysteresis for noise immunity and slow edges.
3 GND power_in Device ground return for input and output stages, carrying high peak discharge currents, so it needs a low-impedance connection to the bias supply return.
4 INB input High-impedance, low-threshold control input for Driver B with hysteresis for noise immunity and slow edges.
5 OUTB output CMOS push-pull output of Driver B (noninverting on MCP14A0454) sourcing/sinking 4.5A peak at VDD = 18V, with 500 mA reverse-current latch-up rating.
6 VDD power_in Bias supply input for the driver, 4.5V to 18V, to be decoupled to ground with a local capacitor.
7 OUTA output CMOS push-pull output of Driver A (noninverting on MCP14A0454) sourcing/sinking 4.5A peak at VDD = 18V, with 500 mA reverse-current latch-up rating.
8 ENB input Active-high enable for Driver B; driving it below threshold forces OUTB low regardless of INB, and an internal pull-up lets it float for normal operation.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Logic 1 High Input Voltage VIH 2 1.6 V TA = +25°C, 4.5V ≤ VDD ≤ 18V 4
Logic 0 Low Input Voltage VIL 1.3 0.8 V TA = +25°C, 4.5V ≤ VDD ≤ 18V 4
Input Current IIN -1 1 µA 0V ≤ VIN ≤ VDD 4
Logic 1 High Enable Voltage VEH 2 1.6 V 4
Logic 0 Low Enable Voltage VEL 1.3 0.8 V 4
Enable Propagation Delay tD3 tD3 16 23 ns VDD = 18V, VEN = 5V, see Figure 4-3, (Note 1) 4
Enable Propagation Delay tD4 tD4 19 26 ns VDD = 18V, VEN = 5V, see Figure 4-3, (Note 1) 4
Low Output Voltage VOL 0.025 V IOUT = 0A 4
Output Resistance, High ROH 1.7 2.7 Ω IOUT = 10 mA, VDD = 18V 4
Output Resistance, Low ROL 1.3 2.3 Ω IOUT = 10 mA, VDD = 18V 4
Latch-Up Protection Withstand Reverse Current IREV 0.5 A Duty cycle ≤ 2%, t ≤ 300 µs (Note 1) 4
Rise Time tR 12 17 ns VDD = 18V, CL = 1800 pF, see Figure 4-1, Figure 4-2 4
Fall Time tF 12 17 ns VDD = 18V, CL = 1800 pF, see Figure 4-1, Figure 4-2 4
Delay Time tD1 tD1 16 23 ns VDD = 18V, VIN = 5V, see Figure 4-1, Figure 4-2 4
Delay Time tD2 tD2 19 26 ns VDD = 18V, VIN = 5V, see Figure 4-1, Figure 4-2 4
Supply Voltage VDD 4.5 18 V 4
Power Supply Current IDD 620 900 µA VINA/B = 3V, VENA/B = 3V 4
Logic 1 High Input Voltage (over temp) VIH 2 1.6 V Over operating range, 4.5V ≤ VDD ≤ 18V 5
Logic 0 Low Input Voltage (over temp) VIL 1.3 0.8 V Over operating range, 4.5V ≤ VDD ≤ 18V 5
Input Current (over temp) IIN -10 10 µA 0V ≤ VIN ≤ VDD 5
Logic 1 High Enable Voltage (over temp) VEH 2 1.6 V 5
Logic 0 Low Enable Voltage (over temp) VEL 1.3 0.8 V 5
Enable Propagation Delay tD3 (over temp) tD3 20 27 ns VDD = 18V, VEN = 5V, TA = +125°C, see Figure 4-3, (Note 1) 5
Enable Propagation Delay tD4 (over temp) tD4 24 31 ns VDD = 18V, VEN = 5V, TA = +125°C, see Figure 4-3, (Note 1) 5
Low Output Voltage (over temp) VOL 0.025 V DC Test 5
Output Resistance, High (over temp) ROH 3.3 Ω IOUT = 10 mA, VDD = 18V 5
Output Resistance, Low (over temp) ROL 2.9 Ω IOUT = 10 mA, VDD = 18V 5
Rise Time (over temp) tR 14 19 ns VDD = 18V, CL = 1800 pF, TA = +125°C, see Figure 4-1, Figure 4-2 6
Fall Time (over temp) tF 14 19 ns VDD = 18V, CL = 1800 pF, TA = +125°C, see Figure 4-1, Figure 4-2 6
Delay Time tD1 (over temp) tD1 20 27 ns VDD = 18V, VIN = 5V, TA = +125°C, see Figure 4-1, Figure 4-2 6
Delay Time tD2 (over temp) tD2 24 31 ns VDD = 18V, VIN = 5V, TA = +125°C, see Figure 4-1, Figure 4-2 6
Supply Voltage (over temp) VDD 4.5 18 V 6
Power Supply Current (over temp) IDD 1100 µA VINA/B = 3V, VENA/B = 3V 6
Supply Voltage VDD 20 V 3
Package Power Dissipation, 8L SOIC 1 W TA = +50°C 3
ESD protection on all pins (HBM) 2 kV HBM 3
ESD protection on all pins (MM) 200 V MM 3
Specified Temperature Range TA -40 125 °C 6
Maximum Junction Temperature TJ 150 °C 6
Storage Temperature Range TA -65 150 °C 6
Junction-to-Ambient Thermal Resistance, 8LD SOIC θJA 100 °C/W Note 1 6
Junction-to-Top Characterization Parameter, 8LD SOIC ψJT 5.9 °C/W Note 1 6
Junction-to-Board Characterization Parameter, 8LD SOIC ψJB 65 °C/W Note 1 6
Input Voltage Hysteresis VHYST(IN) 0.3 V 4
Enable Voltage Hysteresis VHYST(EN) 0.3 V 4
Enable Pin Pull-Up Resistance RENBL 1.5 MΩ VDD = 18V, ENB = AGND 4
Enable Input Current IEN 12 µA VDD = 18V, ENB = AGND 4
Peak Output Current IPK 4.5 A VDD = 18V (Note 1) 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 23

CAD (KiCad official)

  • Symbol: MCP14A0454T-E
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mcp14a0454t-e-etched.step / mcp14a0454t-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp14a0454t-e.step / mcp14a0454t-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (34 pp, sha256 1a3d8d6619869444, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF