3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMCP14A0454T-E
Microchip Tech · Gate Drive ICs · SOIC-8
MCP14A0454T-E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ENA | input | Active-high enable for Driver A; driving it below threshold forces OUTA low regardless of INA, and an internal pull-up lets it float for normal operation. |
| 2 | INA | input | High-impedance, low-threshold control input for Driver A with hysteresis for noise immunity and slow edges. |
| 3 | GND | power_in | Device ground return for input and output stages, carrying high peak discharge currents, so it needs a low-impedance connection to the bias supply return. |
| 4 | INB | input | High-impedance, low-threshold control input for Driver B with hysteresis for noise immunity and slow edges. |
| 5 | OUTB | output | CMOS push-pull output of Driver B (noninverting on MCP14A0454) sourcing/sinking 4.5A peak at VDD = 18V, with 500 mA reverse-current latch-up rating. |
| 6 | VDD | power_in | Bias supply input for the driver, 4.5V to 18V, to be decoupled to ground with a local capacitor. |
| 7 | OUTA | output | CMOS push-pull output of Driver A (noninverting on MCP14A0454) sourcing/sinking 4.5A peak at VDD = 18V, with 500 mA reverse-current latch-up rating. |
| 8 | ENB | input | Active-high enable for Driver B; driving it below threshold forces OUTB low regardless of INB, and an internal pull-up lets it float for normal operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic 1 High Input Voltage | VIH | 2 | 1.6 | V | TA = +25°C, 4.5V ≤ VDD ≤ 18V | 4 | |
| Logic 0 Low Input Voltage | VIL | 1.3 | 0.8 | V | TA = +25°C, 4.5V ≤ VDD ≤ 18V | 4 | |
| Input Current | IIN | -1 | 1 | µA | 0V ≤ VIN ≤ VDD | 4 | |
| Logic 1 High Enable Voltage | VEH | 2 | 1.6 | V | 4 | ||
| Logic 0 Low Enable Voltage | VEL | 1.3 | 0.8 | V | 4 | ||
| Enable Propagation Delay tD3 | tD3 | 16 | 23 | ns | VDD = 18V, VEN = 5V, see Figure 4-3, (Note 1) | 4 | |
| Enable Propagation Delay tD4 | tD4 | 19 | 26 | ns | VDD = 18V, VEN = 5V, see Figure 4-3, (Note 1) | 4 | |
| Low Output Voltage | VOL | 0.025 | V | IOUT = 0A | 4 | ||
| Output Resistance, High | ROH | 1.7 | 2.7 | Ω | IOUT = 10 mA, VDD = 18V | 4 | |
| Output Resistance, Low | ROL | 1.3 | 2.3 | Ω | IOUT = 10 mA, VDD = 18V | 4 | |
| Latch-Up Protection Withstand Reverse Current | IREV | 0.5 | A | Duty cycle ≤ 2%, t ≤ 300 µs (Note 1) | 4 | ||
| Rise Time | tR | 12 | 17 | ns | VDD = 18V, CL = 1800 pF, see Figure 4-1, Figure 4-2 | 4 | |
| Fall Time | tF | 12 | 17 | ns | VDD = 18V, CL = 1800 pF, see Figure 4-1, Figure 4-2 | 4 | |
| Delay Time tD1 | tD1 | 16 | 23 | ns | VDD = 18V, VIN = 5V, see Figure 4-1, Figure 4-2 | 4 | |
| Delay Time tD2 | tD2 | 19 | 26 | ns | VDD = 18V, VIN = 5V, see Figure 4-1, Figure 4-2 | 4 | |
| Supply Voltage | VDD | 4.5 | 18 | V | 4 | ||
| Power Supply Current | IDD | 620 | 900 | µA | VINA/B = 3V, VENA/B = 3V | 4 | |
| Logic 1 High Input Voltage (over temp) | VIH | 2 | 1.6 | V | Over operating range, 4.5V ≤ VDD ≤ 18V | 5 | |
| Logic 0 Low Input Voltage (over temp) | VIL | 1.3 | 0.8 | V | Over operating range, 4.5V ≤ VDD ≤ 18V | 5 | |
| Input Current (over temp) | IIN | -10 | 10 | µA | 0V ≤ VIN ≤ VDD | 5 | |
| Logic 1 High Enable Voltage (over temp) | VEH | 2 | 1.6 | V | 5 | ||
| Logic 0 Low Enable Voltage (over temp) | VEL | 1.3 | 0.8 | V | 5 | ||
| Enable Propagation Delay tD3 (over temp) | tD3 | 20 | 27 | ns | VDD = 18V, VEN = 5V, TA = +125°C, see Figure 4-3, (Note 1) | 5 | |
| Enable Propagation Delay tD4 (over temp) | tD4 | 24 | 31 | ns | VDD = 18V, VEN = 5V, TA = +125°C, see Figure 4-3, (Note 1) | 5 | |
| Low Output Voltage (over temp) | VOL | 0.025 | V | DC Test | 5 | ||
| Output Resistance, High (over temp) | ROH | 3.3 | Ω | IOUT = 10 mA, VDD = 18V | 5 | ||
| Output Resistance, Low (over temp) | ROL | 2.9 | Ω | IOUT = 10 mA, VDD = 18V | 5 | ||
| Rise Time (over temp) | tR | 14 | 19 | ns | VDD = 18V, CL = 1800 pF, TA = +125°C, see Figure 4-1, Figure 4-2 | 6 | |
| Fall Time (over temp) | tF | 14 | 19 | ns | VDD = 18V, CL = 1800 pF, TA = +125°C, see Figure 4-1, Figure 4-2 | 6 | |
| Delay Time tD1 (over temp) | tD1 | 20 | 27 | ns | VDD = 18V, VIN = 5V, TA = +125°C, see Figure 4-1, Figure 4-2 | 6 | |
| Delay Time tD2 (over temp) | tD2 | 24 | 31 | ns | VDD = 18V, VIN = 5V, TA = +125°C, see Figure 4-1, Figure 4-2 | 6 | |
| Supply Voltage (over temp) | VDD | 4.5 | 18 | V | 6 | ||
| Power Supply Current (over temp) | IDD | 1100 | µA | VINA/B = 3V, VENA/B = 3V | 6 | ||
| Supply Voltage | VDD | 20 | V | 3 | |||
| Package Power Dissipation, 8L SOIC | 1 | W | TA = +50°C | 3 | |||
| ESD protection on all pins (HBM) | 2 | kV | HBM | 3 | |||
| ESD protection on all pins (MM) | 200 | V | MM | 3 | |||
| Specified Temperature Range | TA | -40 | 125 | °C | 6 | ||
| Maximum Junction Temperature | TJ | 150 | °C | 6 | |||
| Storage Temperature Range | TA | -65 | 150 | °C | 6 | ||
| Junction-to-Ambient Thermal Resistance, 8LD SOIC | θJA | 100 | °C/W | Note 1 | 6 | ||
| Junction-to-Top Characterization Parameter, 8LD SOIC | ψJT | 5.9 | °C/W | Note 1 | 6 | ||
| Junction-to-Board Characterization Parameter, 8LD SOIC | ψJB | 65 | °C/W | Note 1 | 6 | ||
| Input Voltage Hysteresis | VHYST(IN) | 0.3 | V | 4 | |||
| Enable Voltage Hysteresis | VHYST(EN) | 0.3 | V | 4 | |||
| Enable Pin Pull-Up Resistance | RENBL | 1.5 | MΩ | VDD = 18V, ENB = AGND | 4 | ||
| Enable Input Current | IEN | 12 | µA | VDD = 18V, ENB = AGND | 4 | ||
| Peak Output Current | IPK | 4.5 | A | VDD = 18V (Note 1) | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 23 |
CAD (KiCad official)
- Symbol:
MCP14A0454T-E - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mcp14a0454t-e-etched.step/mcp14a0454t-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp14a0454t-e.step/mcp14a0454t-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (34 pp, sha256
1a3d8d6619869444, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).