main
Ray
Publish 0.1.0
e5126a5
MCP14A0052T-E
Microchip Tech · Gate Drive ICs · SOT-23-6
MCP14A0052T-E from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Bias supply input for the MOSFET driver with a 4.5V to 18V range, which must be decoupled to ground with a local capacitor. |
| 2 | AGND | power_in | Analog ground return for the input and enable stages, to be connected to an electrically quiet ground node as a low-noise reference for IN and EN. |
| 3 | IN | input | High-impedance TTL/CMOS compatible control input (2V to 18V logic) with hysteresis; noninverting for the MCP14A0052. |
| 4 | EN | input | Active-high TTL/CMOS compatible device enable with hysteresis and internal pull-up to VDD, so it can be left floating; driving it low forces OUT low regardless of IN. |
| 5 | GND | power_in | Power ground return for the output stage, needing a low-impedance connection to the bias supply return since high peak currents flow out of this pin. |
| 6 | OUT | output | CMOS push-pull output sourcing and sinking 0.5A peak current at VDD = 18V, with a 500 mA reverse current latch-up rating. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (absolute maximum) | VDD | 20 | V | 3 | |||
| ESD Protection on All Pins (MM) | 100 | V | MM | 3 | |||
| Supply Voltage | VDD | 4.5 | 18 | V | 4 | ||
| Specified Temperature Range | TA | -40 | 125 | °C | 5 | ||
| Maximum Junction Temperature | TJ | 150 | °C | 5 | |||
| Storage Temperature Range | TA | -65 | 150 | °C | 5 | ||
| Thermal Resistance, 6-Lead SOT-23 | θJA | 192 | °C/W | 5 | |||
| Logic '1' High Input Voltage | VIH | 2 | 1.6 | V | TA = +25°C, 4.5V ≤ VDD ≤ 18V | 3 | |
| Logic '0' Low Input Voltage | VIL | 1.2 | 0.8 | V | TA = +25°C, 4.5V ≤ VDD ≤ 18V | 3 | |
| Input Voltage Hysteresis | VHYST(IN) | 0.4 | V | 3 | |||
| Input Current | IIN | -1 | 1 | µA | 0V ≤ VIN ≤ VDD | 3 | |
| Logic '1' High Enable Voltage | VEH | 2 | 1.6 | V | 3 | ||
| Logic '0' Low Enable Voltage | VEL | 1.2 | 0.8 | V | 3 | ||
| Enable Voltage Hysteresis | VHYST(EN) | 0.4 | V | 3 | |||
| Enable Pin Pull-up Resistance | RENBL | 1.8 | MΩ | VDD = 18V, ENB = AGND | 3 | ||
| Enable Input Current | IEN | 10 | µA | VDD = 18V, ENB = AGND | 3 | ||
| Propagation Delay (enable) | tD3 | 35 | 43 | ns | VDD = 18V, VEN = 5V, see Figure 4-3 | 3 | |
| Propagation Delay (enable) | tD4 | 23 | 31 | ns | VDD = 18V, VEN = 5V, see Figure 4-3 | 3 | |
| Low Output Voltage | VOL | 0.025 | V | IOUT = 0A | 3 | ||
| Output Resistance, High | ROH | 12.5 | 17 | Ω | IOUT = 10 mA, VDD = 18V | 3 | |
| Output Resistance, Low | ROL | 7.5 | 10 | Ω | IOUT = 10 mA, VDD = 18V | 3 | |
| Peak Output Current | IPK | 0.5 | A | VDD = 18V | 3 | ||
| Latch-up Protection Withstand Reverse Current | IREV | 0.5 | A | Duty cycle ≤ 2%, t ≤ 300 µs | 3 | ||
| Rise Time | tR | 40 | 51 | ns | VDD = 18V, CL = 1000 pF | 4 | |
| Fall Time | tF | 28 | 39 | ns | VDD = 18V, CL = 1000 pF | 4 | |
| Delay Time | tD1 | 33 | 41 | ns | VDD = 18V, VIN = 5V | 4 | |
| Delay Time | tD2 | 24 | 32 | ns | VDD = 18V, VIN = 5V | 4 | |
| Power Supply Current | IDD | 330 | 560 | µA | VIN = 3V, VEN = 3V | 4 | |
| Power Supply Current | IDD | 360 | 580 | µA | VIN = 0V, VEN = 3V | 4 | |
| Power Supply Current | IDD | 375 | 600 | µA | VIN = 0V, VEN = 0V | 4 | |
| Input Current (over operating temp.) | IIN | -10 | 10 | µA | 0V ≤ VIN ≤ VDD | 4 | |
| Enable Input Current (over operating temp.) | IEN | 12 | µA | VDD = 18V, ENB = AGND | 4 | ||
| Propagation Delay (enable, over temp.) | tD3 | 33 | 41 | ns | VDD = 18V, VEN = 5V, TA = +125°C | 4 | |
| Propagation Delay (enable, over temp.) | tD4 | 25 | 33 | ns | VDD = 18V, VEN = 5V, TA = +125°C | 4 | |
| Low Output Voltage (over operating temp.) | VOL | 0.025 | V | DC test | 4 | ||
| Output Resistance, High (over operating temp.) | ROH | 24 | Ω | IOUT = 10 mA, VDD = 18V | 4 | ||
| Output Resistance, Low (over operating temp.) | ROL | 15 | Ω | IOUT = 10 mA, VDD = 18V | 4 | ||
| Rise Time (over operating temp.) | tR | 45 | 56 | ns | VDD = 18V, CL = 1000 pF, TA = +125°C | 5 | |
| Fall Time (over operating temp.) | tF | 34 | 45 | ns | VDD = 18V, CL = 1000 pF, TA = +125°C | 5 | |
| Delay Time (over operating temp.) | tD1 | 32 | 40 | ns | VDD = 18V, VIN = 5V, TA = +125°C | 5 | |
| Delay Time (over operating temp.) | tD2 | 27 | 35 | ns | VDD = 18V, VIN = 5V, TA = +125°C | 5 | |
| Power Supply Current (over operating temp.) | IDD | 760 | uA | VIN = 3V, VEN = 3V | 5 | ||
| Power Supply Current (over operating temp.) | IDD | 780 | uA | VIN = 0V, VEN = 3V | 5 | ||
| Power Supply Current (over operating temp.) | IDD | 800 | uA | VIN = 0V, VEN = 0V | 5 |
CAD (KiCad official)
- Symbol:
MCP14A0052T-E - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
mcp14a0052t-e-etched.step/mcp14a0052t-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp14a0052t-e.step/mcp14a0052t-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (24 pp, sha256
f9c3c15c48e64d7f, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP14A0052T-E
**Microchip Tech** · Gate Drive ICs · SOT-23-6
MCP14A0052T-E from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Bias supply input for the MOSFET driver with a 4.5V to 18V range, which must be decoupled to ground with a local capacitor. |
| 2 | AGND | power_in | Analog ground return for the input and enable stages, to be connected to an electrically quiet ground node as a low-noise reference for IN and EN. |
| 3 | IN | input | High-impedance TTL/CMOS compatible control input (2V to 18V logic) with hysteresis; noninverting for the MCP14A0052. |
| 4 | EN | input | Active-high TTL/CMOS compatible device enable with hysteresis and internal pull-up to VDD, so it can be left floating; driving it low forces OUT low regardless of IN. |
| 5 | GND | power_in | Power ground return for the output stage, needing a low-impedance connection to the bias supply return since high peak currents flow out of this pin. |
| 6 | OUT | output | CMOS push-pull output sourcing and sinking 0.5A peak current at VDD = 18V, with a 500 mA reverse current latch-up rating. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (absolute maximum) | VDD | | | 20 | V | | 3 |
| ESD Protection on All Pins (MM) | | | | 100 | V | MM | 3 |
| Supply Voltage | VDD | 4.5 | | 18 | V | | 4 |
| Specified Temperature Range | TA | -40 | | 125 | °C | | 5 |
| Maximum Junction Temperature | TJ | | | 150 | °C | | 5 |
| Storage Temperature Range | TA | -65 | | 150 | °C | | 5 |
| Thermal Resistance, 6-Lead SOT-23 | θJA | | 192 | | °C/W | | 5 |
| Logic '1' High Input Voltage | VIH | 2 | 1.6 | | V | TA = +25°C, 4.5V ≤ VDD ≤ 18V | 3 |
| Logic '0' Low Input Voltage | VIL | | 1.2 | 0.8 | V | TA = +25°C, 4.5V ≤ VDD ≤ 18V | 3 |
| Input Voltage Hysteresis | VHYST(IN) | | 0.4 | | V | | 3 |
| Input Current | IIN | -1 | | 1 | µA | 0V ≤ VIN ≤ VDD | 3 |
| Logic '1' High Enable Voltage | VEH | 2 | 1.6 | | V | | 3 |
| Logic '0' Low Enable Voltage | VEL | | 1.2 | 0.8 | V | | 3 |
| Enable Voltage Hysteresis | VHYST(EN) | | 0.4 | | V | | 3 |
| Enable Pin Pull-up Resistance | RENBL | | 1.8 | | MΩ | VDD = 18V, ENB = AGND | 3 |
| Enable Input Current | IEN | | 10 | | µA | VDD = 18V, ENB = AGND | 3 |
| Propagation Delay (enable) | tD3 | | 35 | 43 | ns | VDD = 18V, VEN = 5V, see Figure 4-3 | 3 |
| Propagation Delay (enable) | tD4 | | 23 | 31 | ns | VDD = 18V, VEN = 5V, see Figure 4-3 | 3 |
| Low Output Voltage | VOL | | | 0.025 | V | IOUT = 0A | 3 |
| Output Resistance, High | ROH | | 12.5 | 17 | Ω | IOUT = 10 mA, VDD = 18V | 3 |
| Output Resistance, Low | ROL | | 7.5 | 10 | Ω | IOUT = 10 mA, VDD = 18V | 3 |
| Peak Output Current | IPK | | 0.5 | | A | VDD = 18V | 3 |
| Latch-up Protection Withstand Reverse Current | IREV | 0.5 | | | A | Duty cycle ≤ 2%, t ≤ 300 µs | 3 |
| Rise Time | tR | | 40 | 51 | ns | VDD = 18V, CL = 1000 pF | 4 |
| Fall Time | tF | | 28 | 39 | ns | VDD = 18V, CL = 1000 pF | 4 |
| Delay Time | tD1 | | 33 | 41 | ns | VDD = 18V, VIN = 5V | 4 |
| Delay Time | tD2 | | 24 | 32 | ns | VDD = 18V, VIN = 5V | 4 |
| Power Supply Current | IDD | | 330 | 560 | µA | VIN = 3V, VEN = 3V | 4 |
| Power Supply Current | IDD | | 360 | 580 | µA | VIN = 0V, VEN = 3V | 4 |
| Power Supply Current | IDD | | 375 | 600 | µA | VIN = 0V, VEN = 0V | 4 |
| Input Current (over operating temp.) | IIN | -10 | | 10 | µA | 0V ≤ VIN ≤ VDD | 4 |
| Enable Input Current (over operating temp.) | IEN | | 12 | | µA | VDD = 18V, ENB = AGND | 4 |
| Propagation Delay (enable, over temp.) | tD3 | | 33 | 41 | ns | VDD = 18V, VEN = 5V, TA = +125°C | 4 |
| Propagation Delay (enable, over temp.) | tD4 | | 25 | 33 | ns | VDD = 18V, VEN = 5V, TA = +125°C | 4 |
| Low Output Voltage (over operating temp.) | VOL | | | 0.025 | V | DC test | 4 |
| Output Resistance, High (over operating temp.) | ROH | | | 24 | Ω | IOUT = 10 mA, VDD = 18V | 4 |
| Output Resistance, Low (over operating temp.) | ROL | | | 15 | Ω | IOUT = 10 mA, VDD = 18V | 4 |
| Rise Time (over operating temp.) | tR | | 45 | 56 | ns | VDD = 18V, CL = 1000 pF, TA = +125°C | 5 |
| Fall Time (over operating temp.) | tF | | 34 | 45 | ns | VDD = 18V, CL = 1000 pF, TA = +125°C | 5 |
| Delay Time (over operating temp.) | tD1 | | 32 | 40 | ns | VDD = 18V, VIN = 5V, TA = +125°C | 5 |
| Delay Time (over operating temp.) | tD2 | | 27 | 35 | ns | VDD = 18V, VIN = 5V, TA = +125°C | 5 |
| Power Supply Current (over operating temp.) | IDD | | | 760 | uA | VIN = 3V, VEN = 3V | 5 |
| Power Supply Current (over operating temp.) | IDD | | | 780 | uA | VIN = 0V, VEN = 3V | 5 |
| Power Supply Current (over operating temp.) | IDD | | | 800 | uA | VIN = 0V, VEN = 0V | 5 |
## CAD (KiCad official)
- Symbol: `MCP14A0052T-E`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `mcp14a0052t-e-etched.step` / `mcp14a0052t-e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp14a0052t-e.step` / `mcp14a0052t-e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/MCP14A0051-2-Family-Data-Sheet-DS20005369B.pdf) (24 pp, sha256 `f9c3c15c48e64d7f`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp14a0052t-e-datasheet.pdf)