main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mcp14a0052t-e: viewers · Ray
mcp14a0052t-e-etched.glb Publish 0.1.0 · Ray
mcp14a0052t-e-etched.step mcp14a0052t-e: factory component page (tier=mfr) · Ray
mcp14a0052t-e-hero.glb mcp14a0052t-e: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp14a0052t-e-hero.overlay.json Publish 0.1.0 · Ray
mcp14a0052t-e.glb Publish 0.1.0 · Ray
mcp14a0052t-e.kicad_mod Publish 0.1.0 · Ray
mcp14a0052t-e.kicad_sym Publish 0.1.0 · Ray
mcp14a0052t-e.lbr Publish 0.1.0 · Ray
mcp14a0052t-e.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 6 pins · Ray

MCP14A0052T-E

Microchip Tech · Gate Drive ICs · SOT-23-6

MCP14A0052T-E from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Bias supply input for the MOSFET driver with a 4.5V to 18V range, which must be decoupled to ground with a local capacitor.
2 AGND power_in Analog ground return for the input and enable stages, to be connected to an electrically quiet ground node as a low-noise reference for IN and EN.
3 IN input High-impedance TTL/CMOS compatible control input (2V to 18V logic) with hysteresis; noninverting for the MCP14A0052.
4 EN input Active-high TTL/CMOS compatible device enable with hysteresis and internal pull-up to VDD, so it can be left floating; driving it low forces OUT low regardless of IN.
5 GND power_in Power ground return for the output stage, needing a low-impedance connection to the bias supply return since high peak currents flow out of this pin.
6 OUT output CMOS push-pull output sourcing and sinking 0.5A peak current at VDD = 18V, with a 500 mA reverse current latch-up rating.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-6
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (absolute maximum) VDD 20 V 3
ESD Protection on All Pins (MM) 100 V MM 3
Supply Voltage VDD 4.5 18 V 4
Specified Temperature Range TA -40 125 °C 5
Maximum Junction Temperature TJ 150 °C 5
Storage Temperature Range TA -65 150 °C 5
Thermal Resistance, 6-Lead SOT-23 θJA 192 °C/W 5
Logic '1' High Input Voltage VIH 2 1.6 V TA = +25°C, 4.5V ≤ VDD ≤ 18V 3
Logic '0' Low Input Voltage VIL 1.2 0.8 V TA = +25°C, 4.5V ≤ VDD ≤ 18V 3
Input Voltage Hysteresis VHYST(IN) 0.4 V 3
Input Current IIN -1 1 µA 0V ≤ VIN ≤ VDD 3
Logic '1' High Enable Voltage VEH 2 1.6 V 3
Logic '0' Low Enable Voltage VEL 1.2 0.8 V 3
Enable Voltage Hysteresis VHYST(EN) 0.4 V 3
Enable Pin Pull-up Resistance RENBL 1.8 MΩ VDD = 18V, ENB = AGND 3
Enable Input Current IEN 10 µA VDD = 18V, ENB = AGND 3
Propagation Delay (enable) tD3 35 43 ns VDD = 18V, VEN = 5V, see Figure 4-3 3
Propagation Delay (enable) tD4 23 31 ns VDD = 18V, VEN = 5V, see Figure 4-3 3
Low Output Voltage VOL 0.025 V IOUT = 0A 3
Output Resistance, High ROH 12.5 17 Ω IOUT = 10 mA, VDD = 18V 3
Output Resistance, Low ROL 7.5 10 Ω IOUT = 10 mA, VDD = 18V 3
Peak Output Current IPK 0.5 A VDD = 18V 3
Latch-up Protection Withstand Reverse Current IREV 0.5 A Duty cycle ≤ 2%, t ≤ 300 µs 3
Rise Time tR 40 51 ns VDD = 18V, CL = 1000 pF 4
Fall Time tF 28 39 ns VDD = 18V, CL = 1000 pF 4
Delay Time tD1 33 41 ns VDD = 18V, VIN = 5V 4
Delay Time tD2 24 32 ns VDD = 18V, VIN = 5V 4
Power Supply Current IDD 330 560 µA VIN = 3V, VEN = 3V 4
Power Supply Current IDD 360 580 µA VIN = 0V, VEN = 3V 4
Power Supply Current IDD 375 600 µA VIN = 0V, VEN = 0V 4
Input Current (over operating temp.) IIN -10 10 µA 0V ≤ VIN ≤ VDD 4
Enable Input Current (over operating temp.) IEN 12 µA VDD = 18V, ENB = AGND 4
Propagation Delay (enable, over temp.) tD3 33 41 ns VDD = 18V, VEN = 5V, TA = +125°C 4
Propagation Delay (enable, over temp.) tD4 25 33 ns VDD = 18V, VEN = 5V, TA = +125°C 4
Low Output Voltage (over operating temp.) VOL 0.025 V DC test 4
Output Resistance, High (over operating temp.) ROH 24 Ω IOUT = 10 mA, VDD = 18V 4
Output Resistance, Low (over operating temp.) ROL 15 Ω IOUT = 10 mA, VDD = 18V 4
Rise Time (over operating temp.) tR 45 56 ns VDD = 18V, CL = 1000 pF, TA = +125°C 5
Fall Time (over operating temp.) tF 34 45 ns VDD = 18V, CL = 1000 pF, TA = +125°C 5
Delay Time (over operating temp.) tD1 32 40 ns VDD = 18V, VIN = 5V, TA = +125°C 5
Delay Time (over operating temp.) tD2 27 35 ns VDD = 18V, VIN = 5V, TA = +125°C 5
Power Supply Current (over operating temp.) IDD 760 uA VIN = 3V, VEN = 3V 5
Power Supply Current (over operating temp.) IDD 780 uA VIN = 0V, VEN = 3V 5
Power Supply Current (over operating temp.) IDD 800 uA VIN = 0V, VEN = 0V 5

CAD (KiCad official)

  • Symbol: MCP14A0052T-E
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: mcp14a0052t-e-etched.step / mcp14a0052t-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp14a0052t-e.step / mcp14a0052t-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (24 pp, sha256 f9c3c15c48e64d7f, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF