main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mcp1316t-29le-ot: viewers rendered from the public page · Ray
mcp1316t-29le-ot-etched.glb mcp1316t-29le-ot: factory component page (tier=mfr) · Ray
mcp1316t-29le-ot-etched.step mcp1316t-29le-ot: factory component page (tier=mfr) · Ray
mcp1316t-29le-ot-hero.glb mcp1316t-29le-ot: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp1316t-29le-ot-hero.overlay.json mcp1316t-29le-ot: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp1316t-29le-ot.glb Publish 0.1.0 · Ray
mcp1316t-29le-ot.kicad_mod Publish 0.1.0 · Ray
mcp1316t-29le-ot.kicad_sym Publish 0.1.0 · Ray
mcp1316t-29le-ot.lbr Publish 0.1.0 · Ray
mcp1316t-29le-ot.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 5 pins · Ray

MCP1316T-29LE

Microchip Tech · Monitors & Reset Circuits · SOT-23-5

MCP1316T-29LE from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 RST output Push-pull active-low reset output that is driven low when VDD falls below VTRIP, when MR is forced low, when WDI misses its minimum time-out, or during power-up, and returns high once VDD exceeds VTRIP + VHYS after the reset delay tRST.
2 VSS power_in Ground reference for the device.
3 MR input Active-low manual reset input with an internal pull-up resistor and noise filtering, where a low level (switch shorted to ground) forces RST active.
4 WDI input Watchdog timer input (Schmitt-trigger) where an edge transition resets the watchdog counter, a first falling edge starts the timer, and the standard time-out is 1.6 s typical.
5 VDD power_in Positive supply for the device, specified for 1.0 V to 5.5 V operation.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage Range VDD 1 5.5 V 3
Specified VDD Value to VOUT Low VDD 1 V I RST = 10 µA, V RST < 0.3V 3
Operating Current, Watchdog Timer Active IDD 5 10 µA Watchdog Timer Active 3
Operating Current, Watchdog Timer Inactive IDD 1 2 µA Watchdog Timer Inactive 3
Operating Current, VDD < VTRIP IDD 1 2 µA VDD < VTRIP 3
Operating Current, Reset Delay Timer Active IDD 5 10 µA Reset Delay Timer Active 3
VDD Trip Point MCP13XX-29 VTRIP 2.857 2.9 2.944 V TA = +25°C (Note 1) 4
VDD Trip Point MCP13XX-29 VTRIP 2.828 2.9 2.973 V TA = -40°C to +125°C (Note 2) 4
VDD Trip Point Tempco TTPCO -40 40 ppm/°C 5
Threshold Hysteresis MCP13XX-29 VHYS 0.029 0.174 V TA = +25°C (Note 3) 6
RST/RST Low-Level Output Voltage VOL 0.3 V IOL = 50 µA, 1.0V ≤ VDD ≤ 1.5V 8
Input Leakage Current (MR and WDI) IIL -1 1 µA VSS ≤ VPIN ≤ VDD 8
Output Pin Capacitive Loading (RST and RST) CO 50 pF Tester loading to meet AC timing specifications 8
Reset Active Time (standard time-out) tRST 140 200 280 ms Standard Time Out 9
MR Pulse Width tMR 1 µs 10
WDI Pulse Width tWP 50 ns 10
Watchdog Time-Out Period (standard time-out) tWD 1.12 1.6 2.4 sec Standard Time Out 10
Specified Temperature Range TA -40 125 °C Except MCP13XX-25 (or below) 11
Maximum Junction Temperature TJ 150 °C 11
Storage Temperature Range TA -65 150 °C 11
Thermal Resistance, 5L-SOT-23 θJA 220.7 °C/W 11
Supply Voltage (VDD to VSS) VDD 7 V 3
Input current (VDD) IIN 10 mA 3
Output current (RST) IOUT 10 mA 3
Ambient temperature with power applied TA -40 125 °C 3

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: MCP1316T-29LE
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: mcp1316t-29le-ot-etched.step / mcp1316t-29le-ot-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp1316t-29le-ot.step / mcp1316t-29le-ot.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (54 pp, sha256 f313bca289b277f3, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF