3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMCP1316T-29LE
Microchip Tech · Monitors & Reset Circuits · SOT-23-5
MCP1316T-29LE from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RST | output | Push-pull active-low reset output that is driven low when VDD falls below VTRIP, when MR is forced low, when WDI misses its minimum time-out, or during power-up, and returns high once VDD exceeds VTRIP + VHYS after the reset delay tRST. |
| 2 | VSS | power_in | Ground reference for the device. |
| 3 | MR | input | Active-low manual reset input with an internal pull-up resistor and noise filtering, where a low level (switch shorted to ground) forces RST active. |
| 4 | WDI | input | Watchdog timer input (Schmitt-trigger) where an edge transition resets the watchdog counter, a first falling edge starts the timer, and the standard time-out is 1.6 s typical. |
| 5 | VDD | power_in | Positive supply for the device, specified for 1.0 V to 5.5 V operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VDD | 1 | 5.5 | V | 3 | ||
| Specified VDD Value to VOUT Low | VDD | 1 | V | I RST = 10 µA, V RST < 0.3V | 3 | ||
| Operating Current, Watchdog Timer Active | IDD | 5 | 10 | µA | Watchdog Timer Active | 3 | |
| Operating Current, Watchdog Timer Inactive | IDD | 1 | 2 | µA | Watchdog Timer Inactive | 3 | |
| Operating Current, VDD < VTRIP | IDD | 1 | 2 | µA | VDD < VTRIP | 3 | |
| Operating Current, Reset Delay Timer Active | IDD | 5 | 10 | µA | Reset Delay Timer Active | 3 | |
| VDD Trip Point MCP13XX-29 | VTRIP | 2.857 | 2.9 | 2.944 | V | TA = +25°C (Note 1) | 4 |
| VDD Trip Point MCP13XX-29 | VTRIP | 2.828 | 2.9 | 2.973 | V | TA = -40°C to +125°C (Note 2) | 4 |
| VDD Trip Point Tempco | TTPCO | -40 | 40 | ppm/°C | 5 | ||
| Threshold Hysteresis MCP13XX-29 | VHYS | 0.029 | 0.174 | V | TA = +25°C (Note 3) | 6 | |
| RST/RST Low-Level Output Voltage | VOL | 0.3 | V | IOL = 50 µA, 1.0V ≤ VDD ≤ 1.5V | 8 | ||
| Input Leakage Current (MR and WDI) | IIL | -1 | 1 | µA | VSS ≤ VPIN ≤ VDD | 8 | |
| Output Pin Capacitive Loading (RST and RST) | CO | 50 | pF | Tester loading to meet AC timing specifications | 8 | ||
| Reset Active Time (standard time-out) | tRST | 140 | 200 | 280 | ms | Standard Time Out | 9 |
| MR Pulse Width | tMR | 1 | µs | 10 | |||
| WDI Pulse Width | tWP | 50 | ns | 10 | |||
| Watchdog Time-Out Period (standard time-out) | tWD | 1.12 | 1.6 | 2.4 | sec | Standard Time Out | 10 |
| Specified Temperature Range | TA | -40 | 125 | °C | Except MCP13XX-25 (or below) | 11 | |
| Maximum Junction Temperature | TJ | 150 | °C | 11 | |||
| Storage Temperature Range | TA | -65 | 150 | °C | 11 | ||
| Thermal Resistance, 5L-SOT-23 | θJA | 220.7 | °C/W | 11 | |||
| Supply Voltage (VDD to VSS) | VDD | 7 | V | 3 | |||
| Input current (VDD) | IIN | 10 | mA | 3 | |||
| Output current (RST) | IOUT | 10 | mA | 3 | |||
| Ambient temperature with power applied | TA | -40 | 125 | °C | 3 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
MCP1316T-29LE - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
mcp1316t-29le-ot-etched.step/mcp1316t-29le-ot-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1316t-29le-ot.step/mcp1316t-29le-ot.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (54 pp, sha256
f313bca289b277f3, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).