Generated by kicad-footprint-generator · KiCad file format 20260206
MC9S08AW32CFGE
NXP Semicon · NXP MCU · LQFP-44(10x10)
MC9S08AW32CFGE from NXP Semicon, in a LQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTC4 | bidirectional | General-purpose I/O pin PTC4 (port C bit 4) with software-selectable internal pull-up when configured as input and selectable output slew-rate and drive strength. |
| 2 | IRQ/TPMCLK | input | External interrupt request input IRQ, also usable as the TPM external clock TPMCLK; the internal pull-up/pull-down is enabled by default and the pin must not be driven above VDD. |
| 3 | RESET | input | Dedicated active-low reset pin with internal pull-up and input hysteresis, pulled low for about 34 bus cycles on any internal or external reset. |
| 4 | PTF0/TPM1CH2 | bidirectional | Port F bit 0 general-purpose I/O, multiplexed with TPM1 channel 2, with software pull-up, slew-rate and drive-strength control. |
| 5 | PTF1/TPM1CH3 | bidirectional | Port F bit 1 general-purpose I/O, multiplexed with TPM1 channel 3, with software pull-up, slew-rate and drive-strength control. |
| 6 | PTF4/TPM2CH0 | bidirectional | Port F bit 4 general-purpose I/O, multiplexed with TPM2 channel 0, with software pull-up, slew-rate and drive-strength control. |
| 7 | PTF5/TPM2CH1 | bidirectional | Port F bit 5 general-purpose I/O, multiplexed with TPM2 channel 1, with software pull-up, slew-rate and drive-strength control. |
| 8 | PTE0/TxD1 | bidirectional | Port E bit 0 general-purpose I/O, multiplexed with SCI1 transmit output TxD1. |
| 9 | PTE1/RxD1 | bidirectional | Port E bit 1 general-purpose I/O, multiplexed with SCI1 receive input RxD1. |
| 10 | PTE2/TPM1CH0 | bidirectional | Port E bit 2 general-purpose I/O, multiplexed with TPM1 channel 0. |
| 11 | PTE3/TPM1CH1 | bidirectional | Port E bit 3 general-purpose I/O, multiplexed with TPM1 channel 1. |
| 12 | PTE4/SS1 | bidirectional | Port E bit 4 general-purpose I/O, multiplexed with SPI slave select SS1. |
| 13 | PTE5/MISO1 | bidirectional | Port E bit 5 general-purpose I/O, multiplexed with SPI master-in/slave-out MISO1. |
| 14 | PTE6/MOSI1 | bidirectional | Port E bit 6 general-purpose I/O, multiplexed with SPI master-out/slave-in MOSI1. |
| 15 | PTE7/SPSCK1 | bidirectional | Port E bit 7 general-purpose I/O, multiplexed with SPI serial clock SPSCK1. |
| 16 | VSS | power_in | Digital ground supply pin for the MCU I/O buffers and internal regulator; connect to system ground (a second VSS pin is provided on pin 39). |
| 17 | VDD | power_in | Primary digital supply pin for the I/O buffers and internal voltage regulator, with absolute maximum rating of -0.3 V to 5.8 V and a 0.1 uF ceramic bypass placed close to the pin. |
| 18 | PTG0/KBIP0 | bidirectional | Port G bit 0 general-purpose I/O, multiplexed with keyboard interrupt input KBIP0. |
| 19 | PTG1/KBIP1 | bidirectional | Port G bit 1 general-purpose I/O, multiplexed with keyboard interrupt input KBIP1. |
| 20 | PTG2/KBIP2 | bidirectional | Port G bit 2 general-purpose I/O, multiplexed with keyboard interrupt input KBIP2. |
| 21 | PTA0 | bidirectional | Port A bit 0 general-purpose I/O with software-selectable pull-up, slew-rate and drive-strength control. |
| 22 | PTA1 | bidirectional | Port A bit 1 general-purpose I/O with software-selectable pull-up, slew-rate and drive-strength control. |
| 23 | PTB0/TPM3CH0/AD1P0 | bidirectional | Port B bit 0 general-purpose I/O, multiplexed with ADC analog input AD0 (which disables digital I/O when enabled) and TPM3 channel 0; TPM3 is not provided on AW-series devices. |
| 24 | PTB1/TPM3CH1/AD1P1 | bidirectional | Port B bit 1 general-purpose I/O, multiplexed with ADC analog input AD1 (which disables digital I/O when enabled) and TPM3 channel 1; TPM3 is not provided on AW-series devices. |
| 25 | PTB2/AD1P2 | bidirectional | Port B bit 2 general-purpose I/O, multiplexed with ADC analog input AD2; digital function is disabled when used as analog input. |
| 26 | PTB3/AD1P3 | bidirectional | Port B bit 3 general-purpose I/O, multiplexed with ADC analog input AD3; digital function is disabled when used as analog input. |
| 27 | PTD0/AD1P8 | bidirectional | Port D bit 0 general-purpose I/O, multiplexed with ADC analog input AD8; digital function is disabled when used as analog input. |
| 28 | PTD1/AD1P9 | bidirectional | Port D bit 1 general-purpose I/O, multiplexed with ADC analog input AD9; digital function is disabled when used as analog input. |
| 29 | VDDAD | power_in | Analog supply for the ADC module, to be held at the same voltage as VDD and bypassed with a 0.1 uF ceramic capacitor close to the pin. |
| 30 | VSSAD | power_in | Analog ground for the ADC module, to be connected to VSS at the same voltage. |
| 31 | PTD2/AD1P10/KBIP5 | bidirectional | Port D bit 2 general-purpose I/O, multiplexed with ADC analog input AD10 and keyboard interrupt input KBIP5. |
| 32 | PTD3/AD1P11/KBIP6 | bidirectional | Port D bit 3 general-purpose I/O, multiplexed with ADC analog input AD11 and keyboard interrupt input KBIP6. |
| 33 | PTG3/KBIP3 | bidirectional | Port G bit 3 general-purpose I/O, multiplexed with keyboard interrupt input KBIP3. |
| 34 | VREFH | power_in | ADC high reference voltage, which must not exceed VDDAD and should be decoupled to VREFL with a 0.1 uF capacitor close to the package. |
| 35 | VREFL | power_in | ADC low reference voltage, connected to VSSAD at the same voltage. |
| 36 | BKGD/MS | bidirectional | Background debug single-wire interface and mode select pin, sampled at the reset rising edge (low forces background mode), with an internal pull-up and no external large capacitance allowed. |
| 37 | PTG5/XTAL | output | Port G bit 5 which serves as the crystal oscillator output XTAL when the external oscillator is enabled. |
| 38 | PTG6/EXTAL | input | Port G bit 6 which serves as the external reference clock or oscillator input EXTAL when the external oscillator is enabled. |
| 39 | VSS | power_in | Secondary digital ground pin, to be connected to system ground or through a low-impedance path to the primary VSS pin. |
| 40 | PTC0/SCL1 | bidirectional | Port C bit 0 general-purpose I/O, multiplexed with IIC serial clock SCL1. |
| 41 | PTC1/SDA1 | bidirectional | Port C bit 1 general-purpose I/O, multiplexed with IIC serial data SDA1. |
| 42 | PTC2/MCLK | bidirectional | Port C bit 2 general-purpose I/O, multiplexed with the MCLK bus-clock output divided by the MCSEL setting when MPE is set. |
| 43 | PTC3/TxD2 | bidirectional | Port C bit 3 general-purpose I/O, multiplexed with SCI2 transmit output TxD2. |
| 44 | PTC5/RxD2 | bidirectional | Port C bit 5 general-purpose I/O, multiplexed with SCI2 receive input RxD2. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-44(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 44 |
CAD (KiCad official)
- Symbol:
MC9S08AW32CFGE - Footprint:
Package_QFP:LQFP-44_10x10mm_P0.8mm - 3D model: LQFP-44(10x10) (KiCad packages3D, STEP)
- 3D model files:
mc9s08aw32cfge-etched.step/mc9s08aw32cfge-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc9s08aw32cfge.step/mc9s08aw32cfge.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (296 pp, sha256
a02b13679de67119, retrieved 2026-10-31, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).