Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MC9S08AW32CFGE

NXP Semicon · NXP MCU · LQFP-44(10x10)

MC9S08AW32CFGE from NXP Semicon, in a LQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PTC4 bidirectional General-purpose I/O pin PTC4 (port C bit 4) with software-selectable internal pull-up when configured as input and selectable output slew-rate and drive strength.
2 IRQ/TPMCLK input External interrupt request input IRQ, also usable as the TPM external clock TPMCLK; the internal pull-up/pull-down is enabled by default and the pin must not be driven above VDD.
3 RESET input Dedicated active-low reset pin with internal pull-up and input hysteresis, pulled low for about 34 bus cycles on any internal or external reset.
4 PTF0/TPM1CH2 bidirectional Port F bit 0 general-purpose I/O, multiplexed with TPM1 channel 2, with software pull-up, slew-rate and drive-strength control.
5 PTF1/TPM1CH3 bidirectional Port F bit 1 general-purpose I/O, multiplexed with TPM1 channel 3, with software pull-up, slew-rate and drive-strength control.
6 PTF4/TPM2CH0 bidirectional Port F bit 4 general-purpose I/O, multiplexed with TPM2 channel 0, with software pull-up, slew-rate and drive-strength control.
7 PTF5/TPM2CH1 bidirectional Port F bit 5 general-purpose I/O, multiplexed with TPM2 channel 1, with software pull-up, slew-rate and drive-strength control.
8 PTE0/TxD1 bidirectional Port E bit 0 general-purpose I/O, multiplexed with SCI1 transmit output TxD1.
9 PTE1/RxD1 bidirectional Port E bit 1 general-purpose I/O, multiplexed with SCI1 receive input RxD1.
10 PTE2/TPM1CH0 bidirectional Port E bit 2 general-purpose I/O, multiplexed with TPM1 channel 0.
11 PTE3/TPM1CH1 bidirectional Port E bit 3 general-purpose I/O, multiplexed with TPM1 channel 1.
12 PTE4/SS1 bidirectional Port E bit 4 general-purpose I/O, multiplexed with SPI slave select SS1.
13 PTE5/MISO1 bidirectional Port E bit 5 general-purpose I/O, multiplexed with SPI master-in/slave-out MISO1.
14 PTE6/MOSI1 bidirectional Port E bit 6 general-purpose I/O, multiplexed with SPI master-out/slave-in MOSI1.
15 PTE7/SPSCK1 bidirectional Port E bit 7 general-purpose I/O, multiplexed with SPI serial clock SPSCK1.
16 VSS power_in Digital ground supply pin for the MCU I/O buffers and internal regulator; connect to system ground (a second VSS pin is provided on pin 39).
17 VDD power_in Primary digital supply pin for the I/O buffers and internal voltage regulator, with absolute maximum rating of -0.3 V to 5.8 V and a 0.1 uF ceramic bypass placed close to the pin.
18 PTG0/KBIP0 bidirectional Port G bit 0 general-purpose I/O, multiplexed with keyboard interrupt input KBIP0.
19 PTG1/KBIP1 bidirectional Port G bit 1 general-purpose I/O, multiplexed with keyboard interrupt input KBIP1.
20 PTG2/KBIP2 bidirectional Port G bit 2 general-purpose I/O, multiplexed with keyboard interrupt input KBIP2.
21 PTA0 bidirectional Port A bit 0 general-purpose I/O with software-selectable pull-up, slew-rate and drive-strength control.
22 PTA1 bidirectional Port A bit 1 general-purpose I/O with software-selectable pull-up, slew-rate and drive-strength control.
23 PTB0/TPM3CH0/AD1P0 bidirectional Port B bit 0 general-purpose I/O, multiplexed with ADC analog input AD0 (which disables digital I/O when enabled) and TPM3 channel 0; TPM3 is not provided on AW-series devices.
24 PTB1/TPM3CH1/AD1P1 bidirectional Port B bit 1 general-purpose I/O, multiplexed with ADC analog input AD1 (which disables digital I/O when enabled) and TPM3 channel 1; TPM3 is not provided on AW-series devices.
25 PTB2/AD1P2 bidirectional Port B bit 2 general-purpose I/O, multiplexed with ADC analog input AD2; digital function is disabled when used as analog input.
26 PTB3/AD1P3 bidirectional Port B bit 3 general-purpose I/O, multiplexed with ADC analog input AD3; digital function is disabled when used as analog input.
27 PTD0/AD1P8 bidirectional Port D bit 0 general-purpose I/O, multiplexed with ADC analog input AD8; digital function is disabled when used as analog input.
28 PTD1/AD1P9 bidirectional Port D bit 1 general-purpose I/O, multiplexed with ADC analog input AD9; digital function is disabled when used as analog input.
29 VDDAD power_in Analog supply for the ADC module, to be held at the same voltage as VDD and bypassed with a 0.1 uF ceramic capacitor close to the pin.
30 VSSAD power_in Analog ground for the ADC module, to be connected to VSS at the same voltage.
31 PTD2/AD1P10/KBIP5 bidirectional Port D bit 2 general-purpose I/O, multiplexed with ADC analog input AD10 and keyboard interrupt input KBIP5.
32 PTD3/AD1P11/KBIP6 bidirectional Port D bit 3 general-purpose I/O, multiplexed with ADC analog input AD11 and keyboard interrupt input KBIP6.
33 PTG3/KBIP3 bidirectional Port G bit 3 general-purpose I/O, multiplexed with keyboard interrupt input KBIP3.
34 VREFH power_in ADC high reference voltage, which must not exceed VDDAD and should be decoupled to VREFL with a 0.1 uF capacitor close to the package.
35 VREFL power_in ADC low reference voltage, connected to VSSAD at the same voltage.
36 BKGD/MS bidirectional Background debug single-wire interface and mode select pin, sampled at the reset rising edge (low forces background mode), with an internal pull-up and no external large capacitance allowed.
37 PTG5/XTAL output Port G bit 5 which serves as the crystal oscillator output XTAL when the external oscillator is enabled.
38 PTG6/EXTAL input Port G bit 6 which serves as the external reference clock or oscillator input EXTAL when the external oscillator is enabled.
39 VSS power_in Secondary digital ground pin, to be connected to system ground or through a low-impedance path to the primary VSS pin.
40 PTC0/SCL1 bidirectional Port C bit 0 general-purpose I/O, multiplexed with IIC serial clock SCL1.
41 PTC1/SDA1 bidirectional Port C bit 1 general-purpose I/O, multiplexed with IIC serial data SDA1.
42 PTC2/MCLK bidirectional Port C bit 2 general-purpose I/O, multiplexed with the MCLK bus-clock output divided by the MCSEL setting when MPE is set.
43 PTC3/TxD2 bidirectional Port C bit 3 general-purpose I/O, multiplexed with SCI2 transmit output TxD2.
44 PTC5/RxD2 bidirectional Port C bit 5 general-purpose I/O, multiplexed with SCI2 receive input RxD2.

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package LQFP-44(10x10)
Category Embedded Processors & Controllers
Pins 44

CAD (KiCad official)

  • Symbol: MC9S08AW32CFGE
  • Footprint: Package_QFP:LQFP-44_10x10mm_P0.8mm
  • 3D model: LQFP-44(10x10) (KiCad packages3D, STEP)
  • 3D model files: mc9s08aw32cfge-etched.step / mc9s08aw32cfge-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mc9s08aw32cfge.step / mc9s08aw32cfge.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (296 pp, sha256 a02b13679de67119, retrieved 2026-10-31, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF