main
History Download
Ray Publish 0.1.0 1789a03

MC908JL3ECDWE

NXP Semicon · Microcontrollers (MCU/MPU/SOC) · SOIC-28-300mil

MC908JL3ECDWE from NXP Semicon, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IRQ input External interrupt input with software programmable internal pull-up and Schmitt trigger, also used for mode entry selection (VDD to VTST).
2 PTA0/KBI0 bidirectional Port A general-purpose I/O shared with keyboard interrupt KBI0, with programmable pull-up and LED direct sink capability.
3 VSS power_in Power supply ground (0V).
4 OSC1 input X-tal or RC oscillator input (analog).
5 OSC2 output On the X-tal MC68HC908JL3E, X-tal oscillator output that is the inverting OSC1 signal (RC versions share it with RCCLK/PTA6/KBI6).
6 PTA1/KBI1 bidirectional Port A general-purpose I/O shared with keyboard interrupt KBI1, with programmable pull-up and LED direct sink capability.
7 VDD power_in Power supply, 5V or 3V.
8 PTA2/KBI2 bidirectional Port A general-purpose I/O shared with keyboard interrupt KBI2, with programmable pull-up and LED direct sink capability.
9 PTA3/KBI3 bidirectional Port A general-purpose I/O shared with keyboard interrupt KBI3, with programmable pull-up and LED direct sink capability.
10 PTB7/ADC7 bidirectional Port B general-purpose I/O shared with ADC input channel 7.
11 PTB6/ADC6 bidirectional Port B general-purpose I/O shared with ADC input channel 6.
12 PTB5/ADC5 bidirectional Port B general-purpose I/O shared with ADC input channel 5.
13 PTD7 bidirectional Port D general-purpose I/O with LED sink capability, configurable as 25mA open-drain output with 5k pull-up.
14 PTD6 bidirectional Port D general-purpose I/O with LED sink capability, configurable as 25mA open-drain output with 5k pull-up.
15 PTB4/ADC4 bidirectional Port B general-purpose I/O shared with ADC input channel 4.
16 PTD0/ADC11 bidirectional Port D general-purpose I/O shared with ADC input channel 11.
17 PTB3/ADC3 bidirectional Port B general-purpose I/O shared with ADC input channel 3; also selects the monitor-mode bus clock divider at entry.
18 PTB2/ADC2 bidirectional Port B general-purpose I/O shared with ADC input channel 2.
19 PTD1/ADC10 bidirectional Port D general-purpose I/O shared with ADC input channel 10.
20 PTB1/ADC1 bidirectional Port B general-purpose I/O shared with ADC input channel 1.
21 PTB0/ADC0 bidirectional Port B general-purpose I/O shared with ADC input channel 0; also the single-wire monitor-mode communication pin.
22 PTD3/ADC8 bidirectional Port D general-purpose I/O shared with ADC input channel 8, with LED sink capability.
23 PTA4/KBI4 bidirectional Port A general-purpose I/O shared with keyboard interrupt KBI4, with programmable pull-up and LED direct sink capability.
24 PTD2/ADC9 bidirectional Port D general-purpose I/O shared with ADC input channel 9, with LED sink capability.
25 PTD5/TCH1 bidirectional Port D general-purpose I/O shared with timer channel 1 (TCH1) input capture/output compare.
26 PTD4/TCH0 bidirectional Port D general-purpose I/O shared with timer channel 0 (TCH0) input capture/output compare.
27 PTA5/KBI5 bidirectional Port A general-purpose I/O shared with keyboard interrupt KBI5, with programmable pull-up and LED direct sink capability.
28 RST input Active-low RESET input with internal pull-up and Schmitt trigger input (VDD to VTST).

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package SOIC-28-300mil
Category Embedded Processors & Controllers
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD -0.3 6 V Voltages referenced to VSS 135
Mode entry voltage, IRQ pin VTST 8.5 V VSS-0.3 to +8.5 V 135
Maximum current per pin excluding VDD and VSS I -25 25 mA 135
Storage temperature TSTG -55 150 °C 135
Maximum current out of VSS IMVSS 100 mA 135
Maximum current into VDD IMVDD 100 mA 135
Operating temperature range TA -40 85 °C C suffix 136
Thermal resistance, 28-pin SOIC θJA 70 °C/W 28-pin SOIC 136
Output low voltage (5V) VOL 0.4 V ILOAD = 1.6mA, PTA6, PTB0-PTB7, PTD0, PTD1, PTD4, PTD5 137
Output low voltage (5V) VOL 0.5 V ILOAD = 25mA, PTD6, PTD7 137
LED drive current (5V) IOL 10 16 22 mA VOL = 3V, PTA0-PTA5, PTD2, PTD3, PTD6, PTD7 137
Run supply current (5V) IDD 10 11 mA fOP = 4MHz, MC68HC908JL3E 137
Wait supply current (5V) IDD 6 6.5 mA fOP = 4MHz, MC68HC908JL3E 137
Stop supply current (5V) IDD 2 5 μA -40°C to 85°C, MC68HC908JL3E 137
Digital I/O ports Hi-Z leakage current (5V) IIL -10 10 μA 137
Input current (5V) IIN -1 1 μA 137
Port capacitance output COUT 12 pF Ports (as input or output) 137
Port capacitance input CIN 8 pF Ports (as input or output) 137
POR rearm voltage (5V) VPOR 0 100 mV 137
POR rise time ramp rate (5V) RPOR 0.035 V/ms 137
Monitor mode entry voltage (5V) VTST 8.5 V min is 1.5 × VDD 137
Pullup resistor PTD6, PTD7 RPU1 1.8 3.3 4.8 kΩ Measured at VDD = 5.0V 137
Pullup resistor RST, IRQ, PTA0-PTA6 RPU2 16 26 36 kΩ Measured at VDD = 5.0V 137
LVI reset voltage (5V) VLVR5 3.6 4 4.4 V 138
Internal operating frequency (5V) fOP 8 MHz VDD = 4.5 to 5.5 Vdc 138
RST input pulse width low (5V) tIRL 750 ns VDD = 4.5 to 5.5 Vdc 138
Crystal frequency (5V) fOSCXCLK 10 32 MHz XTALCLK 139
External clock reference frequency (5V) fOSCXCLK 0 32 MHz min printed as dc 139
Feedback bias resistor RB 10 MΩ 139
Output low voltage (3V) VOL 0.4 V ILOAD = 0.8mA, PTA6, PTB0-PTB7, PTD0, PTD1, PTD4, PTD5 140
Output low voltage (3V) VOL 0.5 V ILOAD = 20mA, PTD6, PTD7 140
LED drive current (3V) IOL 3 6 10 mA VOL = 1.8V, PTA0-PTA5, PTD2, PTD3, PTD6, PTD7 140
Run supply current (3V) IDD 3 3.5 mA fOP = 2MHz, MC68HC908JL3E 140
Wait supply current (3V) IDD 1.5 2 mA fOP = 2MHz, MC68HC908JL3E 140
Stop supply current (3V) IDD 1 5 μA -40°C to 85°C, MC68HC908JL3E 140
Digital I/O ports Hi-Z leakage current (3V) IIL -10 10 μA 140
Input current (3V) IIN -1 1 μA 140
POR rise time ramp rate (3V) RPOR 0.035 V/ms 140
LVI reset voltage (3V) VLVR3 2 2.4 2.69 V 141
Internal operating frequency (3V) fOP 4 MHz VDD = 2.7 to 3.3 Vdc 141
RST input pulse width low (3V) tIRL 1.5 μs VDD = 2.7 to 3.3 Vdc 141
Crystal frequency (3V) fOSCXCLK 8 16 MHz XTALCLK 142
External clock reference frequency (3V) fOSCXCLK 0 16 MHz min printed as dc 142
ADC supply voltage VDDAD 2.7 5.5 V VDD min / VDD max 144
ADC resolution BAD 8 8 Bits 144
ADC absolute accuracy AAD 1.5 LSB Includes quantization; printed ±0.5 / ±1.5 144
ADC internal clock fADIC 0.5 1.048 MHz tested only at 1 MHz 144
ADC conversion time tADC 14 15 tAIC cycles 144
ADC sample time tADS 5 tAIC cycles 144
ADC input capacitance CADI 8 pF Not tested 144
ADC input leakage, Port B/port D -1 1 μA 144
RAM data retention voltage VRDR 1.3 V 145
Flash page erase time tErase 1 ms 145
Flash mass erase time tMErase 4 ms 145
Flash program time tPROG 30 40 μs 145
Flash cumulative program hv period tHV 4 ms 145
Flash data retention time 10 years 145

CAD (KiCad official)

  • Symbol: MC908JL3ECDWE
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
  • 3D model files: mc908jl3ecdwe-etched.step / mc908jl3ecdwe-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mc908jl3ecdwe.step / mc908jl3ecdwe.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (180 pp, sha256 d069d264534bbfec, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF