3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMC908JL3ECDWE
NXP Semicon · Microcontrollers (MCU/MPU/SOC) · SOIC-28-300mil
MC908JL3ECDWE from NXP Semicon, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IRQ | input | External interrupt input with software programmable internal pull-up and Schmitt trigger, also used for mode entry selection (VDD to VTST). |
| 2 | PTA0/KBI0 | bidirectional | Port A general-purpose I/O shared with keyboard interrupt KBI0, with programmable pull-up and LED direct sink capability. |
| 3 | VSS | power_in | Power supply ground (0V). |
| 4 | OSC1 | input | X-tal or RC oscillator input (analog). |
| 5 | OSC2 | output | On the X-tal MC68HC908JL3E, X-tal oscillator output that is the inverting OSC1 signal (RC versions share it with RCCLK/PTA6/KBI6). |
| 6 | PTA1/KBI1 | bidirectional | Port A general-purpose I/O shared with keyboard interrupt KBI1, with programmable pull-up and LED direct sink capability. |
| 7 | VDD | power_in | Power supply, 5V or 3V. |
| 8 | PTA2/KBI2 | bidirectional | Port A general-purpose I/O shared with keyboard interrupt KBI2, with programmable pull-up and LED direct sink capability. |
| 9 | PTA3/KBI3 | bidirectional | Port A general-purpose I/O shared with keyboard interrupt KBI3, with programmable pull-up and LED direct sink capability. |
| 10 | PTB7/ADC7 | bidirectional | Port B general-purpose I/O shared with ADC input channel 7. |
| 11 | PTB6/ADC6 | bidirectional | Port B general-purpose I/O shared with ADC input channel 6. |
| 12 | PTB5/ADC5 | bidirectional | Port B general-purpose I/O shared with ADC input channel 5. |
| 13 | PTD7 | bidirectional | Port D general-purpose I/O with LED sink capability, configurable as 25mA open-drain output with 5k pull-up. |
| 14 | PTD6 | bidirectional | Port D general-purpose I/O with LED sink capability, configurable as 25mA open-drain output with 5k pull-up. |
| 15 | PTB4/ADC4 | bidirectional | Port B general-purpose I/O shared with ADC input channel 4. |
| 16 | PTD0/ADC11 | bidirectional | Port D general-purpose I/O shared with ADC input channel 11. |
| 17 | PTB3/ADC3 | bidirectional | Port B general-purpose I/O shared with ADC input channel 3; also selects the monitor-mode bus clock divider at entry. |
| 18 | PTB2/ADC2 | bidirectional | Port B general-purpose I/O shared with ADC input channel 2. |
| 19 | PTD1/ADC10 | bidirectional | Port D general-purpose I/O shared with ADC input channel 10. |
| 20 | PTB1/ADC1 | bidirectional | Port B general-purpose I/O shared with ADC input channel 1. |
| 21 | PTB0/ADC0 | bidirectional | Port B general-purpose I/O shared with ADC input channel 0; also the single-wire monitor-mode communication pin. |
| 22 | PTD3/ADC8 | bidirectional | Port D general-purpose I/O shared with ADC input channel 8, with LED sink capability. |
| 23 | PTA4/KBI4 | bidirectional | Port A general-purpose I/O shared with keyboard interrupt KBI4, with programmable pull-up and LED direct sink capability. |
| 24 | PTD2/ADC9 | bidirectional | Port D general-purpose I/O shared with ADC input channel 9, with LED sink capability. |
| 25 | PTD5/TCH1 | bidirectional | Port D general-purpose I/O shared with timer channel 1 (TCH1) input capture/output compare. |
| 26 | PTD4/TCH0 | bidirectional | Port D general-purpose I/O shared with timer channel 0 (TCH0) input capture/output compare. |
| 27 | PTA5/KBI5 | bidirectional | Port A general-purpose I/O shared with keyboard interrupt KBI5, with programmable pull-up and LED direct sink capability. |
| 28 | RST | input | Active-low RESET input with internal pull-up and Schmitt trigger input (VDD to VTST). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | SOIC-28-300mil |
| Category | Embedded Processors & Controllers |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | -0.3 | 6 | V | Voltages referenced to VSS | 135 | |
| Mode entry voltage, IRQ pin | VTST | 8.5 | V | VSS-0.3 to +8.5 V | 135 | ||
| Maximum current per pin excluding VDD and VSS | I | -25 | 25 | mA | 135 | ||
| Storage temperature | TSTG | -55 | 150 | °C | 135 | ||
| Maximum current out of VSS | IMVSS | 100 | mA | 135 | |||
| Maximum current into VDD | IMVDD | 100 | mA | 135 | |||
| Operating temperature range | TA | -40 | 85 | °C | C suffix | 136 | |
| Thermal resistance, 28-pin SOIC | θJA | 70 | °C/W | 28-pin SOIC | 136 | ||
| Output low voltage (5V) | VOL | 0.4 | V | ILOAD = 1.6mA, PTA6, PTB0-PTB7, PTD0, PTD1, PTD4, PTD5 | 137 | ||
| Output low voltage (5V) | VOL | 0.5 | V | ILOAD = 25mA, PTD6, PTD7 | 137 | ||
| LED drive current (5V) | IOL | 10 | 16 | 22 | mA | VOL = 3V, PTA0-PTA5, PTD2, PTD3, PTD6, PTD7 | 137 |
| Run supply current (5V) | IDD | 10 | 11 | mA | fOP = 4MHz, MC68HC908JL3E | 137 | |
| Wait supply current (5V) | IDD | 6 | 6.5 | mA | fOP = 4MHz, MC68HC908JL3E | 137 | |
| Stop supply current (5V) | IDD | 2 | 5 | μA | -40°C to 85°C, MC68HC908JL3E | 137 | |
| Digital I/O ports Hi-Z leakage current (5V) | IIL | -10 | 10 | μA | 137 | ||
| Input current (5V) | IIN | -1 | 1 | μA | 137 | ||
| Port capacitance output | COUT | 12 | pF | Ports (as input or output) | 137 | ||
| Port capacitance input | CIN | 8 | pF | Ports (as input or output) | 137 | ||
| POR rearm voltage (5V) | VPOR | 0 | 100 | mV | 137 | ||
| POR rise time ramp rate (5V) | RPOR | 0.035 | V/ms | 137 | |||
| Monitor mode entry voltage (5V) | VTST | 8.5 | V | min is 1.5 × VDD | 137 | ||
| Pullup resistor PTD6, PTD7 | RPU1 | 1.8 | 3.3 | 4.8 | kΩ | Measured at VDD = 5.0V | 137 |
| Pullup resistor RST, IRQ, PTA0-PTA6 | RPU2 | 16 | 26 | 36 | kΩ | Measured at VDD = 5.0V | 137 |
| LVI reset voltage (5V) | VLVR5 | 3.6 | 4 | 4.4 | V | 138 | |
| Internal operating frequency (5V) | fOP | 8 | MHz | VDD = 4.5 to 5.5 Vdc | 138 | ||
| RST input pulse width low (5V) | tIRL | 750 | ns | VDD = 4.5 to 5.5 Vdc | 138 | ||
| Crystal frequency (5V) | fOSCXCLK | 10 | 32 | MHz | XTALCLK | 139 | |
| External clock reference frequency (5V) | fOSCXCLK | 0 | 32 | MHz | min printed as dc | 139 | |
| Feedback bias resistor | RB | 10 | MΩ | 139 | |||
| Output low voltage (3V) | VOL | 0.4 | V | ILOAD = 0.8mA, PTA6, PTB0-PTB7, PTD0, PTD1, PTD4, PTD5 | 140 | ||
| Output low voltage (3V) | VOL | 0.5 | V | ILOAD = 20mA, PTD6, PTD7 | 140 | ||
| LED drive current (3V) | IOL | 3 | 6 | 10 | mA | VOL = 1.8V, PTA0-PTA5, PTD2, PTD3, PTD6, PTD7 | 140 |
| Run supply current (3V) | IDD | 3 | 3.5 | mA | fOP = 2MHz, MC68HC908JL3E | 140 | |
| Wait supply current (3V) | IDD | 1.5 | 2 | mA | fOP = 2MHz, MC68HC908JL3E | 140 | |
| Stop supply current (3V) | IDD | 1 | 5 | μA | -40°C to 85°C, MC68HC908JL3E | 140 | |
| Digital I/O ports Hi-Z leakage current (3V) | IIL | -10 | 10 | μA | 140 | ||
| Input current (3V) | IIN | -1 | 1 | μA | 140 | ||
| POR rise time ramp rate (3V) | RPOR | 0.035 | V/ms | 140 | |||
| LVI reset voltage (3V) | VLVR3 | 2 | 2.4 | 2.69 | V | 141 | |
| Internal operating frequency (3V) | fOP | 4 | MHz | VDD = 2.7 to 3.3 Vdc | 141 | ||
| RST input pulse width low (3V) | tIRL | 1.5 | μs | VDD = 2.7 to 3.3 Vdc | 141 | ||
| Crystal frequency (3V) | fOSCXCLK | 8 | 16 | MHz | XTALCLK | 142 | |
| External clock reference frequency (3V) | fOSCXCLK | 0 | 16 | MHz | min printed as dc | 142 | |
| ADC supply voltage | VDDAD | 2.7 | 5.5 | V | VDD min / VDD max | 144 | |
| ADC resolution | BAD | 8 | 8 | Bits | 144 | ||
| ADC absolute accuracy | AAD | 1.5 | LSB | Includes quantization; printed ±0.5 / ±1.5 | 144 | ||
| ADC internal clock | fADIC | 0.5 | 1.048 | MHz | tested only at 1 MHz | 144 | |
| ADC conversion time | tADC | 14 | 15 | tAIC cycles | 144 | ||
| ADC sample time | tADS | 5 | tAIC cycles | 144 | |||
| ADC input capacitance | CADI | 8 | pF | Not tested | 144 | ||
| ADC input leakage, Port B/port D | -1 | 1 | μA | 144 | |||
| RAM data retention voltage | VRDR | 1.3 | V | 145 | |||
| Flash page erase time | tErase | 1 | ms | 145 | |||
| Flash mass erase time | tMErase | 4 | ms | 145 | |||
| Flash program time | tPROG | 30 | 40 | μs | 145 | ||
| Flash cumulative program hv period | tHV | 4 | ms | 145 | |||
| Flash data retention time | 10 | years | 145 |
CAD (KiCad official)
- Symbol:
MC908JL3ECDWE - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
mc908jl3ecdwe-etched.step/mc908jl3ecdwe-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc908jl3ecdwe.step/mc908jl3ecdwe.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (180 pp, sha256
d069d264534bbfec, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).