main
Ray
Publish 0.1.0
5c2e399
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164
{
"slug": "mc79l05abprag",
"version": "0.1.0",
"type": "component",
"description": "onsemi Linear Voltage Regulators (LDO), TO-92-2.54mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management ics",
"mc79l05abprag",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"mc79l05abprag.kicad_sym",
"mc79l05abprag.kicad_mod",
"mc79l05abprag.glb",
"mc79l05abprag.step",
"mc79l05abprag.lbr",
"docs/hero.png",
"docs/mc79l05abprag-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"mc79l05abprag-hero.glb",
"mc79l05abprag-hero.overlay.json"
],
"component": {
"mpn": "MC79L05ABPRAG",
"manufacturer": "onsemi",
"package": "TO-92-2.54mm",
"pin_count": 3,
"category": "Power Management ICs",
"subcategory": "Linear Voltage Regulators (LDO)",
"datasheet": "https://www.onsemi.com/pdf/datasheet/mc79l05abpra-d.pdf",
"parts": {
"symbol": "mc79l05abprag.kicad_sym",
"footprint": "mc79l05abprag.kicad_mod",
"model_3d": "mc79l05abprag-hero.glb",
"model_3d_plain": "mc79l05abprag.glb",
"model_3d_step": "mc79l05abprag-etched.step",
"model_3d_step_plain": "mc79l05abprag.step",
"lbr": "mc79l05abprag.lbr"
},
"distributor_links": {
"lcsc": "C184431",
"digikey": "MC79L05ABPRAGOSTR-ND",
"mouser": "863-MC79L05ABPRAG"
},
"distributor_check": {
"checked_at": "2026-11-21T05:15:34Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "MC79L05ABPRAGOSTR-ND",
"status": "found"
},
"mouser": {
"pn": "863-MC79L05ABPRAG",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "GND",
"type": "power_in",
"description": "Ground pin, and a common ground is required between the input and the output voltages."
},
{
"number": "2",
"name": "Input",
"type": "power_in",
"description": "Unregulated negative input (-Vin), which must remain typically 2.0 V above the output voltage even at the low point of the ripple, with an absolute input voltage rating of -30 V for the -5 V devices."
},
{
"number": "3",
"name": "Output",
"type": "power_out",
"description": "Regulated negative output of -5.0 V nominal (-4.8 V to -5.2 V at TJ = +25 C), with a bypass capacitor CO of 0.1 uF recommended to improve stability and transient response."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet gives the TO-92 pinout (Case 29-10, P suffix) and lists MC79L05ABPRAG as TO-92 Tape & "
],
"pages_sent": 15,
"cost_usd": 0.0216,
"at": "2026-11-21T05:15:23"
},
"datasheet": {
"url": "https://www.onsemi.com/pdf/datasheet/mc79l05abpra-d.pdf",
"pages": 15,
"sha256": "01d4094522eaba96",
"source_tier": "mfr",
"citation": "onsemi datasheet"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 3,
"described": 3,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "mc79l05abprag.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "body on z = 0, through-hole leads below",
"extents_mm": [
4.83,
3.745,
9.8
],
"zmin_mm": -2.5,
"centre_offset_mm": 0.542,
"footprint_binding": "identity",
"sha256": "f0b61c32ecbf0067157adc5a3d4966ceadf5d6dafe93c51af35f76c41c71a54a",
"checked": "2026-11-21",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "mc79l05abprag-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "body on z = 0, through-hole leads below",
"extents_mm": [
4.83,
3.745,
9.8
],
"zmin_mm": -2.5,
"centre_offset_mm": 0.542,
"footprint_binding": "identity",
"sha256": "20a18ea7eec71b3f845cf62beba100e21f7e8675a221a0b847703a8f7d66bb5a",
"checked": "2026-11-21",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}