main
Ray
mc7812cdtrkg: laser-etched CAD + chip hero (factory 2.0.0 backfill)
ad27d83
MC7812CDTRKG
onsemi · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-252-2(DPAK)
MC7812CDTRKG from onsemi, in a TO-252-2(DPAK). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vin | power_in | Unregulated positive input voltage. Must be at least ~2.0 V above Vout (dropout, Io=1.0 A) and typically ≤35 Vdc (absolute max, 24 V rating for the DPAK/D2PAK CASE 369C/936, 40 V for TO-220 CASE 221AB). A ~0.33 µF input capacitor is recommended if the regulator is not close to the supply filter. |
| 2 | GND | power_in | Common ground reference. Must be shared between the input and output supply returns. The exposed tab/heatsink surface of the DPAK-3 (CASE 369C) package is internally connected to this pin, so the mounting pad also serves as the ground/thermal pad. |
| 3 | Vout | power_out | Regulated +12 Vdc output (±4% for MC7812C; nominal 12.0 V, 11.5-12.5 V over line/load/temperature). Delivers up to 1.0 A output current with adequate heatsinking; typical peak (short-term) current 2.2 A, short-circuit current limit ~0.2 A at Vin=35 V. An output capacitor is not required for stability but ≥0.1 µF improves transient response. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TO-252-2(DPAK) |
| Category | PMIC |
| Pins | 3 |
Ordering variants
Same part, different packaging or reel option.
MC7812CDTRKGMC7812CDTRKGD2TR4GMC7812CDTRKGD2TMC7812CDTRKGTGMC7812CDTRKGT
CAD (KiCad official)
- Symbol:
MC7812CDTRKG - Footprint:
Package_TO_SOT_SMD:TO-252-2 - 3D model: TO-252-2(DPAK) (KiCad packages3D, STEP)
- 3D model files:
mc7812cdtrkg-etched.step/mc7812cdtrkg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc7812cdtrkg.step/mc7812cdtrkg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (31 pp, sha256
ad3f70896343dcf0, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MC7812CDTRKG
**onsemi** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-252-2(DPAK)
MC7812CDTRKG from onsemi, in a TO-252-2(DPAK). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vin | power_in | Unregulated positive input voltage. Must be at least ~2.0 V above Vout (dropout, Io=1.0 A) and typically ≤35 Vdc (absolute max, 24 V rating for the DPAK/D2PAK CASE 369C/936, 40 V for TO-220 CASE 221AB). A ~0.33 µF input capacitor is recommended if the regulator is not close to the supply filter. |
| 2 | GND | power_in | Common ground reference. Must be shared between the input and output supply returns. The exposed tab/heatsink surface of the DPAK-3 (CASE 369C) package is internally connected to this pin, so the mounting pad also serves as the ground/thermal pad. |
| 3 | Vout | power_out | Regulated +12 Vdc output (±4% for MC7812C; nominal 12.0 V, 11.5-12.5 V over line/load/temperature). Delivers up to 1.0 A output current with adequate heatsinking; typical peak (short-term) current 2.2 A, short-circuit current limit ~0.2 A at Vin=35 V. An output capacitor is not required for stability but ≥0.1 µF improves transient response. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TO-252-2(DPAK) |
| Category | PMIC |
| Pins | 3 |
## Ordering variants
Same part, different packaging or reel option.
- `MC7812CDTRKG`
- `MC7812CDTRKGD2TR4G`
- `MC7812CDTRKGD2T`
- `MC7812CDTRKGTG`
- `MC7812CDTRKGT`
## CAD (KiCad official)
- Symbol: `MC7812CDTRKG`
- Footprint: `Package_TO_SOT_SMD:TO-252-2`
- 3D model: TO-252-2(DPAK) (KiCad packages3D, STEP)
- 3D model files: `mc7812cdtrkg-etched.step` / `mc7812cdtrkg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mc7812cdtrkg.step` / `mc7812cdtrkg.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/mc7812cdtrk-d.pdf) (31 pp, sha256 `ad3f70896343dcf0`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mc7812cdtrkg-datasheet.pdf)