Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MC7812CDTRKG

onsemi · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-252-2(DPAK)

MC7812CDTRKG from onsemi, in a TO-252-2(DPAK). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Vin power_in Unregulated positive input voltage. Must be at least ~2.0 V above Vout (dropout, Io=1.0 A) and typically ≤35 Vdc (absolute max, 24 V rating for the DPAK/D2PAK CASE 369C/936, 40 V for TO-220 CASE 221AB). A ~0.33 µF input capacitor is recommended if the regulator is not close to the supply filter.
2 GND power_in Common ground reference. Must be shared between the input and output supply returns. The exposed tab/heatsink surface of the DPAK-3 (CASE 369C) package is internally connected to this pin, so the mounting pad also serves as the ground/thermal pad.
3 Vout power_out Regulated +12 Vdc output (±4% for MC7812C; nominal 12.0 V, 11.5-12.5 V over line/load/temperature). Delivers up to 1.0 A output current with adequate heatsinking; typical peak (short-term) current 2.2 A, short-circuit current limit ~0.2 A at Vin=35 V. An output capacitor is not required for stability but ≥0.1 µF improves transient response.

Key specifications

Parameter Value
Manufacturer onsemi
Package TO-252-2(DPAK)
Category PMIC
Pins 3

Ordering variants

Same part, different packaging or reel option.

  • MC7812CDTRKG
  • MC7812CDTRKGD2TR4G
  • MC7812CDTRKGD2T
  • MC7812CDTRKGTG
  • MC7812CDTRKGT

CAD (KiCad official)

  • Symbol: MC7812CDTRKG
  • Footprint: Package_TO_SOT_SMD:TO-252-2
  • 3D model: TO-252-2(DPAK) (KiCad packages3D, STEP)
  • 3D model files: mc7812cdtrkg-etched.step / mc7812cdtrkg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mc7812cdtrkg.step / mc7812cdtrkg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (31 pp, sha256 ad3f70896343dcf0, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF