main
Ray
Publish 0.1.0
69f0ec9
MC7809CTG
onsemi · Linear Voltage Regulators (LDO) · TO-220
MC7809CTG from onsemi, in a TO-220. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Input | power_in | Unregulated input voltage pin; the input must remain typically 2.0 V above the output voltage even at the low point of the input ripple, and the maximum input voltage for the 5.0-18 V devices is printed as 35 Vdc. |
| 2 | Ground | power_in | Common ground pin, which must be common between input and output because the regulator has no external sense lead; the heatsink surface (tab) is connected to this pin. |
| 3 | Output | power_out | Regulated 9.0 V output pin; an output capacitor CO is not needed for stability but improves transient response, and values below 0.1 µF could cause instability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TO-220 |
| Category | Power Management ICs |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (TJ = 25°C) | VO | 8.65 | 9 | 9.35 | Vdc | TJ = 25°C | 7 |
| Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) | VO | 8.55 | 9 | 9.45 | Vdc | 5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W, 11.5 Vdc ≤ Vin ≤ 24 Vdc | 7 |
| Line Regulation | Regline | 6.2 | 32 | mV | TJ = 25°C, 11 Vdc ≤ Vin ≤ 26 Vdc | 7 | |
| Line Regulation | Regline | 1.8 | 16 | mV | TJ = 25°C, 11.5 Vdc ≤ Vin ≤ 17 Vdc | 7 | |
| Load Regulation | Regload | 1.5 | 35 | mV | TJ = 25°C, 5.0 mA ≤ IO ≤ 1.5 A | 7 | |
| Quiescent Current | IB | 3.4 | 8 | mA | 7 | ||
| Quiescent Current Change | IB | 1 | mA | 11.5 Vdc ≤ Vin ≤ 26 Vdc | 7 | ||
| Quiescent Current Change | IB | 0.5 | mA | 5.0 mA ≤ IO ≤ 1.0 A | 7 | ||
| Ripple Rejection | RR | 56 | 61 | dB | 11.5 Vdc ≤ Vin ≤ 21.5 Vdc, f = 120 Hz, IO = 500 mA | 7 | |
| Dropout Voltage | VI − VO | 2 | Vdc | IO = 1.0 A, TJ = 25°C | 7 | ||
| Output Noise Voltage | Vn | 10 | V/VO | TA = 25°C, 10 Hz ≤ f ≤ 100 kHz | 7 | ||
| Output Resistance | rO | 1 | m | f = 1.0 kHz | 7 | ||
| Short Circuit Current Limit | ISC | 0.2 | A | TA = 25°C, Vin = 35 Vdc | 7 | ||
| Peak Output Current | Imax | 2.2 | A | TJ = 25°C | 7 | ||
| Average Temperature Coefficient of Output Voltage | TCVO | -0.5 | mV/°C | 7 | |||
| Input Voltage (5.0 − 18 V devices) | VI | 35 | Vdc | Maximum Ratings, TA = 25°C, 5.0 − 18 V output group | 1 | ||
| Storage Junction Temperature Range | Tstg | -65 | 150 | °C | 1 | ||
| Operating Junction Temperature | TJ | 150 | °C | 1 | |||
| Thermal Resistance, Junction-to-Ambient | RJA | 65 | °C/W | TO-220 (Case 221A) | 1 | ||
| Thermal Resistance, Junction-to-Case | RJC | 5 | °C/W | TO-220 (Case 221A) | 1 | ||
| Operating Junction Temperature Range (MC78XXC) | TJ | 0 | 125 | °C | MC7809C ordering range TJ = 0°C to +125°C; Tlow = 0°C per Note 9 | 7 |
CAD (KiCad official)
- Symbol:
MC7809CTG - Footprint:
Package_TO_SOT_THT:TO-220-3_Vertical - 3D model: TO-220 (KiCad packages3D, STEP)
- 3D model files:
mc7809ctg-etched.step/mc7809ctg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc7809ctg.step/mc7809ctg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (29 pp, sha256
0d716b89ee95cd63, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MC7809CTG
**onsemi** · Linear Voltage Regulators (LDO) · TO-220
MC7809CTG from onsemi, in a TO-220. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Input | power_in | Unregulated input voltage pin; the input must remain typically 2.0 V above the output voltage even at the low point of the input ripple, and the maximum input voltage for the 5.0-18 V devices is printed as 35 Vdc. |
| 2 | Ground | power_in | Common ground pin, which must be common between input and output because the regulator has no external sense lead; the heatsink surface (tab) is connected to this pin. |
| 3 | Output | power_out | Regulated 9.0 V output pin; an output capacitor CO is not needed for stability but improves transient response, and values below 0.1 µF could cause instability. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TO-220 |
| Category | Power Management ICs |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (TJ = 25°C) | VO | 8.65 | 9 | 9.35 | Vdc | TJ = 25°C | 7 |
| Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) | VO | 8.55 | 9 | 9.45 | Vdc | 5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W, 11.5 Vdc ≤ Vin ≤ 24 Vdc | 7 |
| Line Regulation | Regline | | 6.2 | 32 | mV | TJ = 25°C, 11 Vdc ≤ Vin ≤ 26 Vdc | 7 |
| Line Regulation | Regline | | 1.8 | 16 | mV | TJ = 25°C, 11.5 Vdc ≤ Vin ≤ 17 Vdc | 7 |
| Load Regulation | Regload | | 1.5 | 35 | mV | TJ = 25°C, 5.0 mA ≤ IO ≤ 1.5 A | 7 |
| Quiescent Current | IB | | 3.4 | 8 | mA | | 7 |
| Quiescent Current Change | IB | | | 1 | mA | 11.5 Vdc ≤ Vin ≤ 26 Vdc | 7 |
| Quiescent Current Change | IB | | | 0.5 | mA | 5.0 mA ≤ IO ≤ 1.0 A | 7 |
| Ripple Rejection | RR | 56 | 61 | | dB | 11.5 Vdc ≤ Vin ≤ 21.5 Vdc, f = 120 Hz, IO = 500 mA | 7 |
| Dropout Voltage | VI − VO | | 2 | | Vdc | IO = 1.0 A, TJ = 25°C | 7 |
| Output Noise Voltage | Vn | | 10 | | V/VO | TA = 25°C, 10 Hz ≤ f ≤ 100 kHz | 7 |
| Output Resistance | rO | | 1 | | m | f = 1.0 kHz | 7 |
| Short Circuit Current Limit | ISC | | 0.2 | | A | TA = 25°C, Vin = 35 Vdc | 7 |
| Peak Output Current | Imax | | 2.2 | | A | TJ = 25°C | 7 |
| Average Temperature Coefficient of Output Voltage | TCVO | | -0.5 | | mV/°C | | 7 |
| Input Voltage (5.0 − 18 V devices) | VI | | | 35 | Vdc | Maximum Ratings, TA = 25°C, 5.0 − 18 V output group | 1 |
| Storage Junction Temperature Range | Tstg | -65 | | 150 | °C | | 1 |
| Operating Junction Temperature | TJ | | | 150 | °C | | 1 |
| Thermal Resistance, Junction-to-Ambient | RJA | | 65 | | °C/W | TO-220 (Case 221A) | 1 |
| Thermal Resistance, Junction-to-Case | RJC | | 5 | | °C/W | TO-220 (Case 221A) | 1 |
| Operating Junction Temperature Range (MC78XXC) | TJ | 0 | | 125 | °C | MC7809C ordering range TJ = 0°C to +125°C; Tlow = 0°C per Note 9 | 7 |
## CAD (KiCad official)
- Symbol: `MC7809CTG`
- Footprint: `Package_TO_SOT_THT:TO-220-3_Vertical`
- 3D model: TO-220 (KiCad packages3D, STEP)
- 3D model files: `mc7809ctg-etched.step` / `mc7809ctg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mc7809ctg.step` / `mc7809ctg.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/mc7800-d.pdf) (29 pp, sha256 `0d716b89ee95cd63`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mc7809ctg-datasheet.pdf)