main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mc7809ctg: viewers rendered from the public page · Ray
mc7809ctg-etched.glb Publish 0.1.0 · Ray
mc7809ctg-etched.step mc7809ctg: factory component page (tier=mfr) · Ray
mc7809ctg-hero.glb mc7809ctg: hero GLB from the etched model (keeps the MPN mark) · Ray
mc7809ctg-hero.overlay.json Publish 0.1.0 · Ray
mc7809ctg.glb Publish 0.1.0 · Ray
mc7809ctg.kicad_mod Publish 0.1.0 · Ray
mc7809ctg.kicad_sym Publish 0.1.0 · Ray
mc7809ctg.lbr Publish 0.1.0 · Ray
mc7809ctg.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 3 pins · Ray

MC7809CTG

onsemi · Linear Voltage Regulators (LDO) · TO-220

MC7809CTG from onsemi, in a TO-220. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Input power_in Unregulated input voltage pin; the input must remain typically 2.0 V above the output voltage even at the low point of the input ripple, and the maximum input voltage for the 5.0-18 V devices is printed as 35 Vdc.
2 Ground power_in Common ground pin, which must be common between input and output because the regulator has no external sense lead; the heatsink surface (tab) is connected to this pin.
3 Output power_out Regulated 9.0 V output pin; an output capacitor CO is not needed for stability but improves transient response, and values below 0.1 µF could cause instability.

Key specifications

Parameter Value
Manufacturer onsemi
Package TO-220
Category Power Management ICs
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage (TJ = 25°C) VO 8.65 9 9.35 Vdc TJ = 25°C 7
Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO 8.55 9 9.45 Vdc 5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W, 11.5 Vdc ≤ Vin ≤ 24 Vdc 7
Line Regulation Regline 6.2 32 mV TJ = 25°C, 11 Vdc ≤ Vin ≤ 26 Vdc 7
Line Regulation Regline 1.8 16 mV TJ = 25°C, 11.5 Vdc ≤ Vin ≤ 17 Vdc 7
Load Regulation Regload 1.5 35 mV TJ = 25°C, 5.0 mA ≤ IO ≤ 1.5 A 7
Quiescent Current IB 3.4 8 mA 7
Quiescent Current Change IB 1 mA 11.5 Vdc ≤ Vin ≤ 26 Vdc 7
Quiescent Current Change IB 0.5 mA 5.0 mA ≤ IO ≤ 1.0 A 7
Ripple Rejection RR 56 61 dB 11.5 Vdc ≤ Vin ≤ 21.5 Vdc, f = 120 Hz, IO = 500 mA 7
Dropout Voltage VI − VO 2 Vdc IO = 1.0 A, TJ = 25°C 7
Output Noise Voltage Vn 10 V/VO TA = 25°C, 10 Hz ≤ f ≤ 100 kHz 7
Output Resistance rO 1 m f = 1.0 kHz 7
Short Circuit Current Limit ISC 0.2 A TA = 25°C, Vin = 35 Vdc 7
Peak Output Current Imax 2.2 A TJ = 25°C 7
Average Temperature Coefficient of Output Voltage TCVO -0.5 mV/°C 7
Input Voltage (5.0 − 18 V devices) VI 35 Vdc Maximum Ratings, TA = 25°C, 5.0 − 18 V output group 1
Storage Junction Temperature Range Tstg -65 150 °C 1
Operating Junction Temperature TJ 150 °C 1
Thermal Resistance, Junction-to-Ambient RJA 65 °C/W TO-220 (Case 221A) 1
Thermal Resistance, Junction-to-Case RJC 5 °C/W TO-220 (Case 221A) 1
Operating Junction Temperature Range (MC78XXC) TJ 0 125 °C MC7809C ordering range TJ = 0°C to +125°C; Tlow = 0°C per Note 9 7

CAD (KiCad official)

  • Symbol: MC7809CTG
  • Footprint: Package_TO_SOT_THT:TO-220-3_Vertical
  • 3D model: TO-220 (KiCad packages3D, STEP)
  • 3D model files: mc7809ctg-etched.step / mc7809ctg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mc7809ctg.step / mc7809ctg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (29 pp, sha256 0d716b89ee95cd63, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF