main
Ray Publish 0.1.1 30e247b
{
  "schema_version": 1,
  "type": "component",
  "slug": "mc56f82746vlf",
  "title": "MC56F82746VLF",
  "brief": "NXP Semicon NXP MCU, LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "embedded processors & controllers",
    "mc56f82746vlf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "MC56F82746VLF",
    "manufacturer": "NXP Semicon",
    "package": "LQFP-48(7x7)",
    "pin_count": 48,
    "category": "Embedded Processors & Controllers",
    "subcategory": "NXP MCU",
    "datasheet": "https://www.nxp.com/docs/en/data-sheet/MC56F82746VLF.pdf",
    "parts": {
      "symbol": "mc56f82746vlf.kicad_sym",
      "footprint": "mc56f82746vlf.kicad_mod",
      "model_3d": "mc56f82746vlf-hero.glb",
      "model_3d_plain": "mc56f82746vlf.glb",
      "model_3d_step": "mc56f82746vlf-etched.step",
      "model_3d_step_plain": "mc56f82746vlf.step",
      "lbr": "mc56f82746vlf.lbr"
    },
    "distributor_links": {
      "lcsc": "C881773",
      "digikey": "MC56F82746VLF-ND",
      "mouser": "841-MC56F82746VLF"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T21:55:13Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "MC56F82746VLF-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "841-MC56F82746VLF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "TCK",
        "type": "input",
        "description": "Test clock input with a Schmitt-trigger and internal pulldown enabled, used for JTAG/EOnCE debug; alternate function GPIOD2."
      },
      {
        "number": "2",
        "name": "RESETB",
        "type": "input",
        "description": "Active-low reset input with internal pullup and Schmitt-trigger; it is a 3.3 V pin only and a filter capacitor of up to 0.1 µF is recommended; alternate GPIOD4 is open-drain, and reset is disabled in that mode."
      },
      {
        "number": "3",
        "name": "GPIOC0",
        "type": "bidirectional",
        "description": "GPIO port C0; alternates are EXTAL (crystal/resonator oscillator input) and CLKIN0 (external clock input 0, which requires the GPS_C0 and EXT_SEL bits and a powered-down crystal oscillator)."
      },
      {
        "number": "4",
        "name": "GPIOC1",
        "type": "bidirectional",
        "description": "GPIO port C1; alternate is XTAL (crystal oscillator output), and the crystal oscillator should be powered down if this pin is used as GPIO."
      },
      {
        "number": "5",
        "name": "GPIOC2",
        "type": "bidirectional",
        "description": "GPIO port C2; alternates are TXD0 (SCI0 transmit), XB_OUT11, XB_IN2 and CLKO0 (buffered clock output 0)."
      },
      {
        "number": "6",
        "name": "GPIOC3",
        "type": "bidirectional",
        "description": "GPIO port C3; alternates are TA0 (quad timer channel 0 I/O), CMPA_O (comparator A output), RXD0 (SCI0 receive) and CLKIN1 (external clock input 1)."
      },
      {
        "number": "7",
        "name": "GPIOC4",
        "type": "bidirectional",
        "description": "GPIO port C4; alternates are TA1 (quad timer channel 1 I/O), CMPB_O (comparator B output), XB_IN6 and EWM_OUT_B (external watchdog monitor output)."
      },
      {
        "number": "8",
        "name": "GPIOA4",
        "type": "bidirectional",
        "description": "GPIO port A4; alternate is ANA4, an analog input to ADCA channel 4, and CMPD_IN0, input 0 to comparator D."
      },
      {
        "number": "9",
        "name": "GPIOA0",
        "type": "bidirectional",
        "description": "GPIO port A0; alternates are ANA0 (analog input to ADCA channel 0), CMPA_IN3 (positive input 3 of comparator A) and CMPC_O (comparator C output)."
      },
      {
        "number": "10",
        "name": "GPIOA1",
        "type": "bidirectional",
        "description": "GPIO port A1; alternates are ANA1 (analog input to ADCA channel 1) and CMPA_IN0 (negative input 0 of comparator A), selected by the ADC control register."
      },
      {
        "number": "11",
        "name": "GPIOA2",
        "type": "bidirectional",
        "description": "GPIO port A2; alternates are ANA2 (analog input to ADCA channel 2), VREFHA (ADCA high reference), and CMPA_IN1 (negative input 1 of comparator A)."
      },
      {
        "number": "12",
        "name": "GPIOA3",
        "type": "bidirectional",
        "description": "GPIO port A3; alternates are ANA3 (analog input to ADCA channel 3), VREFLA (ADCA low reference), and CMPA_IN2 (negative input 2 of comparator A)."
      },
      {
        "number": "13",
        "name": "GPIOC5",
        "type": "bidirectional",
        "description": "GPIO port C5; alternate is XB_IN7, crossbar module input 7."
      },
      {
        "number": "14",
        "name": "GPIOB4",
        "type": "bidirectional",
        "description": "GPIO port B4; alternates are ANB4 (analog input to ADCB channel 4) and CMPC_IN1 (negative input 1 of comparator C)."
      },
      {
        "number": "15",
        "name": "VDDA",
        "type": "power_in",
        "description": "Analog power supply, 3.3 V, supplies the analog modules and must be connected to a clean analog power supply."
      },
      {
        "number": "16",
        "name": "VSSA",
        "type": "power_in",
        "description": "Analog ground for the analog modules, which must be connected to a clean power supply."
      },
      {
        "number": "17",
        "name": "GPIOB0",
        "type": "bidirectional",
        "description": "GPIO port B0; alternates are ANB0 (analog input to ADCB channel 0) and CMPB_IN3 (positive input 3 of comparator B)."
      },
      {
        "number": "18",
        "name": "GPIOB1",
        "type": "bidirectional",
        "description": "GPIO port B1; alternates are ANB1 (analog input to ADCB channel 1) and CMPB_IN0 (negative input 0 of comparator B)."
      },
      {
        "number": "19",
        "name": "VCAP",
        "type": "power_out",
        "description": "On-chip regulator output; connect a 2.2 µF bypass capacitor between this pin and VSS, and the total bypass capacitance on all VCAP pins should not exceed 4.7 µF."
      },
      {
        "number": "20",
        "name": "GPIOB2",
        "type": "bidirectional",
        "description": "GPIO port B2; alternates are ANB2 (analog input to ADCB channel 2), VREFHB (ADCB high reference) and CMPC_IN3 (positive input 3 of comparator C)."
      },
      {
        "number": "21",
        "name": "GPIOB3",
        "type": "bidirectional",
        "description": "GPIO port B3; alternates are ANB3 (analog input to ADCB channel 3), VREFLB (ADCB low reference) and CMPC_IN0 (negative input 0 of comparator C)."
      },
      {
        "number": "22",
        "name": "VSS",
        "type": "power_in",
        "description": "I/O ground, which provides ground for the device I/O interface."
      },
      {
        "number": "23",
        "name": "GPIOC6",
        "type": "bidirectional",
        "description": "GPIO port C6; alternates are TA2 (quad timer channel 2 I/O), XB_IN3, and CMP_REF (positive input 3 of comparators A, B and C)."
      },
      {
        "number": "24",
        "name": "GPIOC7",
        "type": "bidirectional",
        "description": "GPIO port C7; alternates are TXD0 (SCI0 transmit) and XB_IN8 (crossbar input 8)."
      },
      {
        "number": "25",
        "name": "GPIOC8",
        "type": "bidirectional",
        "description": "GPIO port C8; alternates are RXD0 (SCI0 receive), XB_IN9 (crossbar input 9) and XB_OUT6 (crossbar output 6)."
      },
      {
        "number": "26",
        "name": "GPIOC9",
        "type": "bidirectional",
        "description": "GPIO port C9; alternates are XB_IN4 (crossbar input 4), TXD0 (SCI0 transmit) and XB_OUT8 (crossbar output 8)."
      },
      {
        "number": "27",
        "name": "GPIOC10",
        "type": "bidirectional",
        "description": "GPIO port C10; alternates are XB_IN5 (crossbar input 5) and XB_OUT9 (crossbar output 9)."
      },
      {
        "number": "28",
        "name": "GPIOF0",
        "type": "bidirectional",
        "description": "GPIO port F0; alternate is XB_IN6, crossbar module input 6."
      },
      {
        "number": "29",
        "name": "GPIOC11",
        "type": "bidirectional",
        "description": "GPIO port C11; alternate is TXD1 (SCI1 transmit data output)."
      },
      {
        "number": "30",
        "name": "GPIOC12",
        "type": "bidirectional",
        "description": "GPIO port C12; alternate is RXD1 (SCI1 receive data input)."
      },
      {
        "number": "31",
        "name": "VSS",
        "type": "power_in",
        "description": "I/O ground, which provides ground for the device I/O interface."
      },
      {
        "number": "32",
        "name": "VDD",
        "type": "power_in",
        "description": "I/O power supply, 3.3 V, which supplies the chip I/O interface."
      },
      {
        "number": "33",
        "name": "GPIOE0",
        "type": "bidirectional",
        "description": "GPIO port E0; alternate is PWM_0B (PWM module A submodule 0 output B or input capture B)."
      },
      {
        "number": "34",
        "name": "GPIOE1",
        "type": "bidirectional",
        "description": "GPIO port E1; alternate is PWM_0A (PWM module A submodule 0 output A or input capture A)."
      },
      {
        "number": "35",
        "name": "GPIOE2",
        "type": "bidirectional",
        "description": "GPIO port E2; alternate is PWMA_1B (PWM module A submodule 1 output B or input capture B)."
      },
      {
        "number": "36",
        "name": "GPIOE3",
        "type": "bidirectional",
        "description": "GPIO port E3; alternate is PWMA_1A (PWM module A submodule 1 output A or input capture A)."
      },
      {
        "number": "37",
        "name": "GPIOC13",
        "type": "bidirectional",
        "description": "GPIO port C13; alternates are TA3 (quad timer channel 3 I/O), XB_IN6 (crossbar input 6) and EWM_OUT_B (external watchdog monitor output)."
      },
      {
        "number": "38",
        "name": "GPIOF1",
        "type": "bidirectional",
        "description": "GPIO port F1; alternates are CLKO1 (buffered clock output 1), XB_IN7 (crossbar input 7) and CMPD_O (comparator D output)."
      },
      {
        "number": "39",
        "name": "GPIOE4",
        "type": "bidirectional",
        "description": "GPIO port E4; alternates are PWMA_2B (PWM module A submodule 2 output B or input capture B) and XB_IN2 (crossbar input 2)."
      },
      {
        "number": "40",
        "name": "GPIOE5",
        "type": "bidirectional",
        "description": "GPIO port E5; alternates are PWMA_2A (PWM module A submodule 2 output A or input capture A) and XB_IN3 (crossbar input 3)."
      },
      {
        "number": "41",
        "name": "GPIOC14",
        "type": "bidirectional",
        "description": "GPIO port C14; alternates are XB_OUT4 (crossbar output 4) and PWM_FAULT4 (disables PWMA output 4)."
      },
      {
        "number": "42",
        "name": "GPIOC15",
        "type": "bidirectional",
        "description": "GPIO port C15; alternates are XB_OUT5 (crossbar output 5) and PWM_FAULT5 (disables PWMA output 5)."
      },
      {
        "number": "43",
        "name": "VCAP",
        "type": "power_out",
        "description": "On-chip regulator output; connect a 2.2 µF bypass capacitor between this pin and VSS, and the total bypass capacitance on all VCAP pins should not exceed 4.7 µF."
      },
      {
        "number": "44",
        "name": "VDD",
        "type": "power_in",
        "description": "I/O power supply, 3.3 V, which supplies the chip I/O interface."
      },
      {
        "number": "45",
        "name": "VSS",
        "type": "power_in",
        "description": "I/O ground, which provides ground for the device I/O interface."
      },
      {
        "number": "46",
        "name": "TDO",
        "type": "output",
        "description": "Test data output, driven in the shift-IR and shift-DR controller states and changing on the falling edge of TCK; alternate function GPIOD1."
      },
      {
        "number": "47",
        "name": "TMS",
        "type": "input",
        "description": "Test mode select input, sampled on the rising edge of TCK with internal pullup; tie to VDD through a 2.2 kΩ resistor to keep on-board debug, otherwise tie directly to VDD; alternate function GPIOD3."
      },
      {
        "number": "48",
        "name": "TDI",
        "type": "input",
        "description": "Test data input, sampled on the rising edge of TCK with internal pullup enabled; alternate function GPIOD0."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The requested MPN MC56F82746VLF does not appear anywhere in the datasheet. The datasheet covers MC56; The part-number format in section 4.3 does not define the value '7' in the CPU-frequency field (only; The 7x7 body size is not stated in the text. The text only names the 48-pin LQFP and its drawing num"
        ],
        "pages_sent": 19,
        "cost_usd": 0.304,
        "at": "2026-10-30T21:55:02"
      },
      "datasheet": {
        "url": "https://www.nxp.com/docs/en/data-sheet/MC56F82746VLF.pdf",
        "pages": 60,
        "sha256": "395605385c1a77c9",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 48,
        "described": 48,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mc56f82746vlf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9,
          9,
          1.5
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "9dea352d93177c2904afd7d7b68ea8855ce1ab691f69f8b3e13655600514b6bf",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mc56f82746vlf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9,
          9,
          1.5
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "9d2fafe895ad9d5b3acfcae16e26a666ea8a9f7cee198c65797c1f50b0ad7c43",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "NXP Semicon",
      "Package": "LQFP-48(7x7)",
      "Category": "Embedded Processors & Controllers",
      "Pins": "48"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "mc56f82746vlf"
  ],
  "discovery_pitch": "MC56F82746VLF (NXP Semicon) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mc56f82746vlf.kicad_sym",
    "mc56f82746vlf.kicad_mod",
    "mc56f82746vlf.glb",
    "mc56f82746vlf.step",
    "mc56f82746vlf.lbr",
    "docs/hero.png",
    "docs/mc56f82746vlf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mc56f82746vlf-hero.glb",
    "mc56f82746vlf-hero.overlay.json",
    "mc56f82746vlf-etched.glb",
    "mc56f82746vlf-etched.step"
  ],
  "visibility": "public",
  "description": "NXP Semicon NXP MCU, LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "org": "adom"
}