Generated by kicad-footprint-generator · KiCad file format 20260206
MC56F82746VLF
NXP Semicon · NXP MCU · LQFP-48(7x7)
MC56F82746VLF from NXP Semicon, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TCK | input | Test clock input with a Schmitt-trigger and internal pulldown enabled, used for JTAG/EOnCE debug; alternate function GPIOD2. |
| 2 | RESETB | input | Active-low reset input with internal pullup and Schmitt-trigger; it is a 3.3 V pin only and a filter capacitor of up to 0.1 µF is recommended; alternate GPIOD4 is open-drain, and reset is disabled in that mode. |
| 3 | GPIOC0 | bidirectional | GPIO port C0; alternates are EXTAL (crystal/resonator oscillator input) and CLKIN0 (external clock input 0, which requires the GPS_C0 and EXT_SEL bits and a powered-down crystal oscillator). |
| 4 | GPIOC1 | bidirectional | GPIO port C1; alternate is XTAL (crystal oscillator output), and the crystal oscillator should be powered down if this pin is used as GPIO. |
| 5 | GPIOC2 | bidirectional | GPIO port C2; alternates are TXD0 (SCI0 transmit), XB_OUT11, XB_IN2 and CLKO0 (buffered clock output 0). |
| 6 | GPIOC3 | bidirectional | GPIO port C3; alternates are TA0 (quad timer channel 0 I/O), CMPA_O (comparator A output), RXD0 (SCI0 receive) and CLKIN1 (external clock input 1). |
| 7 | GPIOC4 | bidirectional | GPIO port C4; alternates are TA1 (quad timer channel 1 I/O), CMPB_O (comparator B output), XB_IN6 and EWM_OUT_B (external watchdog monitor output). |
| 8 | GPIOA4 | bidirectional | GPIO port A4; alternate is ANA4, an analog input to ADCA channel 4, and CMPD_IN0, input 0 to comparator D. |
| 9 | GPIOA0 | bidirectional | GPIO port A0; alternates are ANA0 (analog input to ADCA channel 0), CMPA_IN3 (positive input 3 of comparator A) and CMPC_O (comparator C output). |
| 10 | GPIOA1 | bidirectional | GPIO port A1; alternates are ANA1 (analog input to ADCA channel 1) and CMPA_IN0 (negative input 0 of comparator A), selected by the ADC control register. |
| 11 | GPIOA2 | bidirectional | GPIO port A2; alternates are ANA2 (analog input to ADCA channel 2), VREFHA (ADCA high reference), and CMPA_IN1 (negative input 1 of comparator A). |
| 12 | GPIOA3 | bidirectional | GPIO port A3; alternates are ANA3 (analog input to ADCA channel 3), VREFLA (ADCA low reference), and CMPA_IN2 (negative input 2 of comparator A). |
| 13 | GPIOC5 | bidirectional | GPIO port C5; alternate is XB_IN7, crossbar module input 7. |
| 14 | GPIOB4 | bidirectional | GPIO port B4; alternates are ANB4 (analog input to ADCB channel 4) and CMPC_IN1 (negative input 1 of comparator C). |
| 15 | VDDA | power_in | Analog power supply, 3.3 V, supplies the analog modules and must be connected to a clean analog power supply. |
| 16 | VSSA | power_in | Analog ground for the analog modules, which must be connected to a clean power supply. |
| 17 | GPIOB0 | bidirectional | GPIO port B0; alternates are ANB0 (analog input to ADCB channel 0) and CMPB_IN3 (positive input 3 of comparator B). |
| 18 | GPIOB1 | bidirectional | GPIO port B1; alternates are ANB1 (analog input to ADCB channel 1) and CMPB_IN0 (negative input 0 of comparator B). |
| 19 | VCAP | power_out | On-chip regulator output; connect a 2.2 µF bypass capacitor between this pin and VSS, and the total bypass capacitance on all VCAP pins should not exceed 4.7 µF. |
| 20 | GPIOB2 | bidirectional | GPIO port B2; alternates are ANB2 (analog input to ADCB channel 2), VREFHB (ADCB high reference) and CMPC_IN3 (positive input 3 of comparator C). |
| 21 | GPIOB3 | bidirectional | GPIO port B3; alternates are ANB3 (analog input to ADCB channel 3), VREFLB (ADCB low reference) and CMPC_IN0 (negative input 0 of comparator C). |
| 22 | VSS | power_in | I/O ground, which provides ground for the device I/O interface. |
| 23 | GPIOC6 | bidirectional | GPIO port C6; alternates are TA2 (quad timer channel 2 I/O), XB_IN3, and CMP_REF (positive input 3 of comparators A, B and C). |
| 24 | GPIOC7 | bidirectional | GPIO port C7; alternates are TXD0 (SCI0 transmit) and XB_IN8 (crossbar input 8). |
| 25 | GPIOC8 | bidirectional | GPIO port C8; alternates are RXD0 (SCI0 receive), XB_IN9 (crossbar input 9) and XB_OUT6 (crossbar output 6). |
| 26 | GPIOC9 | bidirectional | GPIO port C9; alternates are XB_IN4 (crossbar input 4), TXD0 (SCI0 transmit) and XB_OUT8 (crossbar output 8). |
| 27 | GPIOC10 | bidirectional | GPIO port C10; alternates are XB_IN5 (crossbar input 5) and XB_OUT9 (crossbar output 9). |
| 28 | GPIOF0 | bidirectional | GPIO port F0; alternate is XB_IN6, crossbar module input 6. |
| 29 | GPIOC11 | bidirectional | GPIO port C11; alternate is TXD1 (SCI1 transmit data output). |
| 30 | GPIOC12 | bidirectional | GPIO port C12; alternate is RXD1 (SCI1 receive data input). |
| 31 | VSS | power_in | I/O ground, which provides ground for the device I/O interface. |
| 32 | VDD | power_in | I/O power supply, 3.3 V, which supplies the chip I/O interface. |
| 33 | GPIOE0 | bidirectional | GPIO port E0; alternate is PWM_0B (PWM module A submodule 0 output B or input capture B). |
| 34 | GPIOE1 | bidirectional | GPIO port E1; alternate is PWM_0A (PWM module A submodule 0 output A or input capture A). |
| 35 | GPIOE2 | bidirectional | GPIO port E2; alternate is PWMA_1B (PWM module A submodule 1 output B or input capture B). |
| 36 | GPIOE3 | bidirectional | GPIO port E3; alternate is PWMA_1A (PWM module A submodule 1 output A or input capture A). |
| 37 | GPIOC13 | bidirectional | GPIO port C13; alternates are TA3 (quad timer channel 3 I/O), XB_IN6 (crossbar input 6) and EWM_OUT_B (external watchdog monitor output). |
| 38 | GPIOF1 | bidirectional | GPIO port F1; alternates are CLKO1 (buffered clock output 1), XB_IN7 (crossbar input 7) and CMPD_O (comparator D output). |
| 39 | GPIOE4 | bidirectional | GPIO port E4; alternates are PWMA_2B (PWM module A submodule 2 output B or input capture B) and XB_IN2 (crossbar input 2). |
| 40 | GPIOE5 | bidirectional | GPIO port E5; alternates are PWMA_2A (PWM module A submodule 2 output A or input capture A) and XB_IN3 (crossbar input 3). |
| 41 | GPIOC14 | bidirectional | GPIO port C14; alternates are XB_OUT4 (crossbar output 4) and PWM_FAULT4 (disables PWMA output 4). |
| 42 | GPIOC15 | bidirectional | GPIO port C15; alternates are XB_OUT5 (crossbar output 5) and PWM_FAULT5 (disables PWMA output 5). |
| 43 | VCAP | power_out | On-chip regulator output; connect a 2.2 µF bypass capacitor between this pin and VSS, and the total bypass capacitance on all VCAP pins should not exceed 4.7 µF. |
| 44 | VDD | power_in | I/O power supply, 3.3 V, which supplies the chip I/O interface. |
| 45 | VSS | power_in | I/O ground, which provides ground for the device I/O interface. |
| 46 | TDO | output | Test data output, driven in the shift-IR and shift-DR controller states and changing on the falling edge of TCK; alternate function GPIOD1. |
| 47 | TMS | input | Test mode select input, sampled on the rising edge of TCK with internal pullup; tie to VDD through a 2.2 kΩ resistor to keep on-board debug, otherwise tie directly to VDD; alternate function GPIOD3. |
| 48 | TDI | input | Test data input, sampled on the rising edge of TCK with internal pullup enabled; alternate function GPIOD0. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
CAD (KiCad official)
- Symbol:
MC56F82746VLF - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
mc56f82746vlf-etched.step/mc56f82746vlf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc56f82746vlf.step/mc56f82746vlf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (60 pp, sha256
395605385c1a77c9, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).