component
MC3479
Public Made by Adomby adom
MEMSIC Accelerometers, LGA-12(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/mc3479
de4a0f1
MC3479
MEMSIC · Accelerometers · LGA-12(2x2)
MC3479 from MEMSIC, in a LGA-12(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCK_SCL | input | Serial clock input for I2C/SPI interface; requires typical 4.7kΩ pull-up resistor to VDD per I2C Fast-Mode specification. |
| 2 | CSN | input | SPI chip select input (active low); must connect to VDD when I2C interface is used. |
| 3 | DOUT_A6 | output | Serial data output (MISO) for SPI; I2C slave address bit 6 selection. |
| 4 | DIN_SDA | bidirectional | Serial data input (MOSI) for SPI and bidirectional open-drain serial data line (SDA) for I2C; requires typical 4.7kΩ pull-up resistor to VDD. |
| 5 | NC | unconnected | No connection. |
| 6 | GND | power_in | Ground reference (0V). |
| 7 | VPP | power_in | Substrate bias pin; must connect to GND. |
| 8 | NC | unconnected | No connection. |
| 9 | VDD | power_in | Power supply input; operating voltage range 1.7V to 3.6V. |
| 10 | NC | unconnected | No connection. |
| 11 | INTN 2 | tri_state | Interrupt output (active low); configurable as open-drain (requires 4.7kΩ pull-up) or push-pull via GPIO control register 0x33 bits 7:6. |
| 12 | INTN 1 | tri_state | Interrupt output (active low); configurable as open-drain (requires 4.7kΩ pull-up) or push-pull via GPIO control register 0x33 bits 3:2. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MEMSIC |
| Package | LGA-12(2x2) |
| Category | Sensors |
| Pins | 12 |
CAD (KiCad official)
- Symbol:
MC3479 - Footprint:
Package_LGA:LGA-12_2x2mm_P0.5mm - 3D model: LGA-12(2x2) (KiCad packages3D, STEP)
- 3D model files:
mc3479-etched.step/mc3479-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc3479.step/mc3479.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MEMSIC datasheet (80 pp, sha256
6ccd60b4a65ceb55, retrieved 2026-09-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MC3479
**MEMSIC** · Accelerometers · LGA-12(2x2)
MC3479 from MEMSIC, in a LGA-12(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCK_SCL | input | Serial clock input for I2C/SPI interface; requires typical 4.7kΩ pull-up resistor to VDD per I2C Fast-Mode specification. |
| 2 | CSN | input | SPI chip select input (active low); must connect to VDD when I2C interface is used. |
| 3 | DOUT_A6 | output | Serial data output (MISO) for SPI; I2C slave address bit 6 selection. |
| 4 | DIN_SDA | bidirectional | Serial data input (MOSI) for SPI and bidirectional open-drain serial data line (SDA) for I2C; requires typical 4.7kΩ pull-up resistor to VDD. |
| 5 | NC | unconnected | No connection. |
| 6 | GND | power_in | Ground reference (0V). |
| 7 | VPP | power_in | Substrate bias pin; must connect to GND. |
| 8 | NC | unconnected | No connection. |
| 9 | VDD | power_in | Power supply input; operating voltage range 1.7V to 3.6V. |
| 10 | NC | unconnected | No connection. |
| 11 | INTN 2 | tri_state | Interrupt output (active low); configurable as open-drain (requires 4.7kΩ pull-up) or push-pull via GPIO control register 0x33 bits 7:6. |
| 12 | INTN 1 | tri_state | Interrupt output (active low); configurable as open-drain (requires 4.7kΩ pull-up) or push-pull via GPIO control register 0x33 bits 3:2. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MEMSIC |
| Package | LGA-12(2x2) |
| Category | Sensors |
| Pins | 12 |
## CAD (KiCad official)
- Symbol: `MC3479`
- Footprint: `Package_LGA:LGA-12_2x2mm_P0.5mm`
- 3D model: LGA-12(2x2) (KiCad packages3D, STEP)
- 3D model files: `mc3479-etched.step` / `mc3479-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mc3479.step` / `mc3479.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MEMSIC datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589835012745814016) (80 pp, sha256 `6ccd60b4a65ceb55`, retrieved 2026-09-17, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mc3479-datasheet.pdf)