main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs mc3479: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers mc3479: viewers · Ray
mc3479-etched.fit.json mc3479: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mc3479-etched.glb mc3479: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mc3479-etched.step mc3479: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mc3479.glb Publish 0.1.0 · Ray
mc3479.kicad_mod Publish 0.1.0 · Ray
mc3479.kicad_sym Publish 0.1.0 · Ray
mc3479.lbr Publish 0.1.0 · Ray
mc3479.step Publish 0.1.0 · Ray
package.json mc3479: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json mc3479: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/mc3479 · Ray

MC3479

MEMSIC · Accelerometers · LGA-12(2x2)

MC3479 from MEMSIC, in a LGA-12(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SCK_SCL input Serial clock input for I2C/SPI interface; requires typical 4.7kΩ pull-up resistor to VDD per I2C Fast-Mode specification.
2 CSN input SPI chip select input (active low); must connect to VDD when I2C interface is used.
3 DOUT_A6 output Serial data output (MISO) for SPI; I2C slave address bit 6 selection.
4 DIN_SDA bidirectional Serial data input (MOSI) for SPI and bidirectional open-drain serial data line (SDA) for I2C; requires typical 4.7kΩ pull-up resistor to VDD.
5 NC unconnected No connection.
6 GND power_in Ground reference (0V).
7 VPP power_in Substrate bias pin; must connect to GND.
8 NC unconnected No connection.
9 VDD power_in Power supply input; operating voltage range 1.7V to 3.6V.
10 NC unconnected No connection.
11 INTN 2 tri_state Interrupt output (active low); configurable as open-drain (requires 4.7kΩ pull-up) or push-pull via GPIO control register 0x33 bits 7:6.
12 INTN 1 tri_state Interrupt output (active low); configurable as open-drain (requires 4.7kΩ pull-up) or push-pull via GPIO control register 0x33 bits 3:2.

Key specifications

Parameter Value
Manufacturer MEMSIC
Package LGA-12(2x2)
Category Sensors
Pins 12

CAD (KiCad official)

  • Symbol: MC3479
  • Footprint: Package_LGA:LGA-12_2x2mm_P0.5mm
  • 3D model: LGA-12(2x2) (KiCad packages3D, STEP)
  • 3D model files: mc3479-etched.step / mc3479-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mc3479.step / mc3479.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MEMSIC datasheet (80 pp, sha256 6ccd60b4a65ceb55, retrieved 2026-09-17, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF