main
History Download
Ray mc33063aqdrq1: specified limits as data (metadata.characteristics, 31 rows from the datasheet) 8806a85

MC33063AQDRQ1

Texas Instruments · DC-DC Converters · SOIC-8

MC33063AQDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Switch Collector output Collector of internal NPN Darlington output switch transistor, absolute maximum voltage 40V, maximum peak current 1.5A with saturation voltage 1.3V at 1A in Darlington configuration.
2 Switch Emitter passive Emitter of internal NPN Darlington output switch transistor, absolute maximum voltage 40V, provides return path for switch current typically grounded.
3 Timing Capacitor passive External timing capacitor connection for oscillator frequency control; oscillator produces 24-42kHz typical frequency with 1nF capacitor value.
4 GND power_in Ground, 0V reference.
5 Comparator Inverting Input input Inverting input to precision 1.25V comparator, absolute maximum voltage rating -0.3V to 40V, receives output feedback for regulation control.
6 VCC power_in Power supply input, absolute maximum rating 40V, recommended operating range 3V to 40V, typical quiescent current 4mA with CT=1nF.
7 IPK input Peak current sense input from external sense resistor, current limit detection voltage 250-350mV typical 300mV; peak switch current determined by Ipk = 330mV/Rsense.
8 Driver Collector output Collector output of internal driver transistor, absolute maximum voltage 40V, maximum collector current 100mA, external transistor drive output for currents exceeding 1.5A.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 40 V 4
Comparator inverting input voltage range VIR -0.3 40 V 4
Switch collector voltage VC(switch) 40 V 4
Switch emitter voltage VE(switch) 40 V VPIN1 = 40V 4
Switch collector-to-emitter voltage VCE(switch) 40 V 4
Driver collector voltage VC(driver) 40 V 4
Driver collector current IC(driver) 100 mA 4
Switch current ISW 1.5 A 4
Operating virtual junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Supply voltage (recommended) VCC 3 40 V 4
Operating ambient temperature (natural convection) TA -40 125 °C 4
Oscillator frequency fosc 24 33 42 kHz VPIN5 = 0V, CT = 1nF, TA = 25°C; VCC = 5V 5
Charging current Ichg 24 35 42 μA VCC = 5V to 40V, TA = 25°C 5
Discharging current Idischg 140 220 260 μA VCC = 5V to 40V, TA = 25°C 5
Discharge to charge current ratio Idischg/Ichg 5.2 6.5 7.5 VPIN7 = VCC, TA = 25°C 5
Current limit sense voltage VIpk 250 300 350 mV Idischg = Ichg, TA = 25°C 5
Saturation voltage, Darlington connection VCE(sat) 1 1.3 V ISW = 1A, pins 1 and 8 connected, full operating temperature range 5
Saturation voltage, non-Darlington connection VCE(sat) 0.45 0.7 V ISW = 1A, RPIN8 = 82Ω to VCC, forced β ≈ 20, full operating temperature range 5
DC current gain hFE 50 75 ISW = 1A, VCE = 5V, TA = 25°C 5
Collector off-state current IC(off) 0.01 100 μA VCE = 40V, full operating temperature range 5
Threshold voltage Vth 1.225 1.25 1.275 V TA = 25°C 5
Threshold voltage over full temperature range Vth 1.21 1.29 V Full operating temperature range 5
Threshold voltage line regulation ΔVth 1.4 5 mV VCC = 5V to 40V, full operating temperature range 5
Input bias current IIB -20 -400 nA VIN = 0V, full operating temperature range 5
Total device supply current ICC 4 mA VCC = 5V to 40V, CT = 1nF, VPIN7 = VCC, VPIN5 > Vth, VPIN2 = GND, all other pins open, full operating temperature range 5
Junction-to-ambient thermal resistance (D, 8-pin) RθJA 121.9 °C/W 4
Junction-to-case (top) thermal resistance (D, 8-pin) RθJC(top) 68.1 °C/W 4
Junction-to-board thermal resistance (D, 8-pin) RθJB 62.3 °C/W 4
Junction-to-top characterization parameter (D, 8-pin) ψJT 19.9 °C/W 4
Junction-to-board characterization parameter (D, 8-pin) ψJB 61.8 °C/W 4

CAD (KiCad official)

  • Symbol: MC33063AQDRQ1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mc33063aqdrq1-etched.step / mc33063aqdrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mc33063aqdrq1.step / mc33063aqdrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (28 pp, sha256 af8e8a47b06b88fc, retrieved 2026-09-26, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF