Generated by kicad-footprint-generator · KiCad file format 20260206
MC33063AQDRQ1
Texas Instruments · DC-DC Converters · SOIC-8
MC33063AQDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Switch Collector | output | Collector of internal NPN Darlington output switch transistor, absolute maximum voltage 40V, maximum peak current 1.5A with saturation voltage 1.3V at 1A in Darlington configuration. |
| 2 | Switch Emitter | passive | Emitter of internal NPN Darlington output switch transistor, absolute maximum voltage 40V, provides return path for switch current typically grounded. |
| 3 | Timing Capacitor | passive | External timing capacitor connection for oscillator frequency control; oscillator produces 24-42kHz typical frequency with 1nF capacitor value. |
| 4 | GND | power_in | Ground, 0V reference. |
| 5 | Comparator Inverting Input | input | Inverting input to precision 1.25V comparator, absolute maximum voltage rating -0.3V to 40V, receives output feedback for regulation control. |
| 6 | VCC | power_in | Power supply input, absolute maximum rating 40V, recommended operating range 3V to 40V, typical quiescent current 4mA with CT=1nF. |
| 7 | IPK | input | Peak current sense input from external sense resistor, current limit detection voltage 250-350mV typical 300mV; peak switch current determined by Ipk = 330mV/Rsense. |
| 8 | Driver Collector | output | Collector output of internal driver transistor, absolute maximum voltage 40V, maximum collector current 100mA, external transistor drive output for currents exceeding 1.5A. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 40 | V | 4 | |||
| Comparator inverting input voltage range | VIR | -0.3 | 40 | V | 4 | ||
| Switch collector voltage | VC(switch) | 40 | V | 4 | |||
| Switch emitter voltage | VE(switch) | 40 | V | VPIN1 = 40V | 4 | ||
| Switch collector-to-emitter voltage | VCE(switch) | 40 | V | 4 | |||
| Driver collector voltage | VC(driver) | 40 | V | 4 | |||
| Driver collector current | IC(driver) | 100 | mA | 4 | |||
| Switch current | ISW | 1.5 | A | 4 | |||
| Operating virtual junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage (recommended) | VCC | 3 | 40 | V | 4 | ||
| Operating ambient temperature (natural convection) | TA | -40 | 125 | °C | 4 | ||
| Oscillator frequency | fosc | 24 | 33 | 42 | kHz | VPIN5 = 0V, CT = 1nF, TA = 25°C; VCC = 5V | 5 |
| Charging current | Ichg | 24 | 35 | 42 | μA | VCC = 5V to 40V, TA = 25°C | 5 |
| Discharging current | Idischg | 140 | 220 | 260 | μA | VCC = 5V to 40V, TA = 25°C | 5 |
| Discharge to charge current ratio | Idischg/Ichg | 5.2 | 6.5 | 7.5 | VPIN7 = VCC, TA = 25°C | 5 | |
| Current limit sense voltage | VIpk | 250 | 300 | 350 | mV | Idischg = Ichg, TA = 25°C | 5 |
| Saturation voltage, Darlington connection | VCE(sat) | 1 | 1.3 | V | ISW = 1A, pins 1 and 8 connected, full operating temperature range | 5 | |
| Saturation voltage, non-Darlington connection | VCE(sat) | 0.45 | 0.7 | V | ISW = 1A, RPIN8 = 82Ω to VCC, forced β ≈ 20, full operating temperature range | 5 | |
| DC current gain | hFE | 50 | 75 | ISW = 1A, VCE = 5V, TA = 25°C | 5 | ||
| Collector off-state current | IC(off) | 0.01 | 100 | μA | VCE = 40V, full operating temperature range | 5 | |
| Threshold voltage | Vth | 1.225 | 1.25 | 1.275 | V | TA = 25°C | 5 |
| Threshold voltage over full temperature range | Vth | 1.21 | 1.29 | V | Full operating temperature range | 5 | |
| Threshold voltage line regulation | ΔVth | 1.4 | 5 | mV | VCC = 5V to 40V, full operating temperature range | 5 | |
| Input bias current | IIB | -20 | -400 | nA | VIN = 0V, full operating temperature range | 5 | |
| Total device supply current | ICC | 4 | mA | VCC = 5V to 40V, CT = 1nF, VPIN7 = VCC, VPIN5 > Vth, VPIN2 = GND, all other pins open, full operating temperature range | 5 | ||
| Junction-to-ambient thermal resistance (D, 8-pin) | RθJA | 121.9 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance (D, 8-pin) | RθJC(top) | 68.1 | °C/W | 4 | |||
| Junction-to-board thermal resistance (D, 8-pin) | RθJB | 62.3 | °C/W | 4 | |||
| Junction-to-top characterization parameter (D, 8-pin) | ψJT | 19.9 | °C/W | 4 | |||
| Junction-to-board characterization parameter (D, 8-pin) | ψJB | 61.8 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
MC33063AQDRQ1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mc33063aqdrq1-etched.step/mc33063aqdrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc33063aqdrq1.step/mc33063aqdrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
af8e8a47b06b88fc, retrieved 2026-09-26, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).