main
Ray
Publish 0.1.0
92cf815
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290
{
"slug": "mc14536bdwg",
"version": "0.1.0",
"type": "component",
"description": "onsemi Timers / Clock Oscillators, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"clock and timing",
"mc14536bdwg",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"mc14536bdwg.kicad_sym",
"mc14536bdwg.kicad_mod",
"mc14536bdwg.glb",
"mc14536bdwg.step",
"mc14536bdwg.lbr",
"docs/hero.png",
"docs/mc14536bdwg-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"mc14536bdwg-hero.glb",
"mc14536bdwg-hero.overlay.json",
"mc14536bdwg-etched.glb"
],
"component": {
"mpn": "MC14536BDWG",
"manufacturer": "onsemi",
"package": "SOIC-16-300mil",
"pin_count": 16,
"category": "Clock and Timing",
"subcategory": "Timers / Clock Oscillators",
"datasheet": "https://www.onsemi.com/pdf/datasheet/mc14536bdw-d.pdf",
"parts": {
"symbol": "mc14536bdwg.kicad_sym",
"footprint": "mc14536bdwg.kicad_mod",
"model_3d": "mc14536bdwg-hero.glb",
"model_3d_plain": "mc14536bdwg-etched.glb",
"model_3d_step": "mc14536bdwg-etched.step",
"model_3d_step_plain": "mc14536bdwg.step",
"lbr": "mc14536bdwg.lbr"
},
"distributor_links": {
"lcsc": "C906786",
"digikey": "MC14536BDWGOS-ND",
"mouser": "863-MC14536BDWG"
},
"distributor_check": {
"checked_at": "2026-11-12T08:10:16Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "MC14536BDWGOS-ND",
"status": "found"
},
"mouser": {
"pn": "863-MC14536BDWG",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "SET",
"type": "input",
"description": "A high on Set asynchronously forces Decode Out high and resets all 24 flip-flop stages, and while high it disables the on-chip RC oscillator."
},
{
"number": "2",
"name": "RESET",
"type": "input",
"description": "A high on Reset asynchronously forces Decode Out low and resets all 24 flip-flop stages, and it also disables the on-chip RC oscillator."
},
{
"number": "3",
"name": "IN1",
"type": "input",
"description": "The internal counters advance on the negative-going edge of this input, which can be an external clock or form an RC oscillator with OUT1 and OUT2."
},
{
"number": "4",
"name": "OUT1",
"type": "output",
"description": "Buffered output used with IN1 to form the RC oscillator; when an external clock is used it may be left unconnected or drive one LSTTL or several CMOS loads."
},
{
"number": "5",
"name": "OUT2",
"type": "output",
"description": "Buffered output used with IN1 to form the RC oscillator; when an external clock is used it may be left unconnected or drive one LSTTL or several CMOS loads."
},
{
"number": "6",
"name": "8-BYPASS",
"type": "input",
"description": "A high bypasses the first eight flip-flop stages, making the device a 16-stage counter with all 16 stages selectable by inputs A, B, C and D."
},
{
"number": "7",
"name": "CLOCK INH",
"type": "input",
"description": "A high disconnects the first counter stage from the clock source, holding the present count; when low, counting starts on the first negative clock edge."
},
{
"number": "8",
"name": "VSS",
"type": "power_in",
"description": "Negative supply and voltage reference; all voltages are referenced to VSS and inputs/outputs must satisfy VSS ≤ (Vin or Vout) ≤ VDD."
},
{
"number": "9",
"name": "A",
"type": "input",
"description": "Stage-select input (least significant bit of the 4-bit select code) that chooses which flip-flop stage is connected to Decode Out."
},
{
"number": "10",
"name": "B",
"type": "input",
"description": "Stage-select input (second bit of the 4-bit select code) that chooses which flip-flop stage is connected to Decode Out."
},
{
"number": "11",
"name": "C",
"type": "input",
"description": "Stage-select input (third bit of the 4-bit select code) that chooses which flip-flop stage is connected to Decode Out."
},
{
"number": "12",
"name": "D",
"type": "input",
"description": "Stage-select input (most significant bit of the 4-bit select code) that chooses which flip-flop stage is connected to Decode Out."
},
{
"number": "13",
"name": "DECODE OUT",
"type": "output",
"description": "Output whose function depends on configuration; with the monostable disabled it is a 50% duty-cycle square wave during free run."
},
{
"number": "14",
"name": "OSC INH",
"type": "input",
"description": "A high level stops the RC oscillator for very low-power standby operation and can be used with an external clock like Clock Inhibit."
},
{
"number": "15",
"name": "MONO-IN",
"type": "passive",
"description": "Timing pin for the monostable: tie to VSS to disable it, or use a resistor to VDD (5 kΩ to 100 kΩ recommended) with an optional capacitor to VSS (1000 pF max)."
},
{
"number": "16",
"name": "VDD",
"type": "power_in",
"description": "Positive supply, specified from 3.0 Vdc to 18 Vdc with respect to VSS."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The PIN ASSIGNMENT graphic on page 1 is garbled in the extracted text, so the SOIC-16 pin map was re; Types for MONO-IN (pin 15) and OUT1/OUT2 (pins 4, 5) are engineering classifications: MONO-IN is an ; Ordering table confirms MC14536BDWG is sold in SOIC-16 WB (DW suffix, 47 units/rail), so this pinout"
],
"pages_sent": 15,
"cost_usd": 0.0053,
"at": "2026-11-12T08:10:09"
},
"datasheet": {
"url": "https://www.onsemi.com/pdf/datasheet/mc14536bdw-d.pdf",
"pages": 15,
"sha256": "8275d9a502a7e313",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "mc14536bdwg.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.3,
10.3,
2.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "mc14536bdwg-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.3,
10.3,
2.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "ee22cc249ce53f0cdcf259904ed1b10b90b4dbcd1b4c7992db9bd2634095c110",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "SOIC-16 WB (CASE 751G)",
"source_page": 13,
"D": {
"nom_mm": 10.3,
"range_mm": [
10.15,
10.45
]
},
"E1": {
"nom_mm": 7.5,
"range_mm": [
7.4,
7.6
]
},
"E": {
"nom_mm": 10.3,
"range_mm": [
10.05,
10.55
]
},
"e": {
"nom_mm": 1.27,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 2.5,
"range_mm": [
2.35,
2.65
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "mc14536bdwg.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}