Generated by kicad-footprint-generator · KiCad file format 20260206
MC14536BDWG
onsemi · Timers / Clock Oscillators · SOIC-16-300mil
MC14536BDWG from onsemi, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SET | input | A high on Set asynchronously forces Decode Out high and resets all 24 flip-flop stages, and while high it disables the on-chip RC oscillator. |
| 2 | RESET | input | A high on Reset asynchronously forces Decode Out low and resets all 24 flip-flop stages, and it also disables the on-chip RC oscillator. |
| 3 | IN1 | input | The internal counters advance on the negative-going edge of this input, which can be an external clock or form an RC oscillator with OUT1 and OUT2. |
| 4 | OUT1 | output | Buffered output used with IN1 to form the RC oscillator; when an external clock is used it may be left unconnected or drive one LSTTL or several CMOS loads. |
| 5 | OUT2 | output | Buffered output used with IN1 to form the RC oscillator; when an external clock is used it may be left unconnected or drive one LSTTL or several CMOS loads. |
| 6 | 8-BYPASS | input | A high bypasses the first eight flip-flop stages, making the device a 16-stage counter with all 16 stages selectable by inputs A, B, C and D. |
| 7 | CLOCK INH | input | A high disconnects the first counter stage from the clock source, holding the present count; when low, counting starts on the first negative clock edge. |
| 8 | VSS | power_in | Negative supply and voltage reference; all voltages are referenced to VSS and inputs/outputs must satisfy VSS ≤ (Vin or Vout) ≤ VDD. |
| 9 | A | input | Stage-select input (least significant bit of the 4-bit select code) that chooses which flip-flop stage is connected to Decode Out. |
| 10 | B | input | Stage-select input (second bit of the 4-bit select code) that chooses which flip-flop stage is connected to Decode Out. |
| 11 | C | input | Stage-select input (third bit of the 4-bit select code) that chooses which flip-flop stage is connected to Decode Out. |
| 12 | D | input | Stage-select input (most significant bit of the 4-bit select code) that chooses which flip-flop stage is connected to Decode Out. |
| 13 | DECODE OUT | output | Output whose function depends on configuration; with the monostable disabled it is a 50% duty-cycle square wave during free run. |
| 14 | OSC INH | input | A high level stops the RC oscillator for very low-power standby operation and can be used with an external clock like Clock Inhibit. |
| 15 | MONO-IN | passive | Timing pin for the monostable: tie to VSS to disable it, or use a resistor to VDD (5 kΩ to 100 kΩ recommended) with an optional capacitor to VSS (1000 pF max). |
| 16 | VDD | power_in | Positive supply, specified from 3.0 Vdc to 18 Vdc with respect to VSS. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-16-300mil |
| Category | Clock and Timing |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage "0" Level (VDD=5.0) | VOL | 0 | 0.05 | Vdc | Vin = VDD or 0; VDD = 5.0 Vdc; max over -55C/25C/125C | 3 | |
| Output Voltage "0" Level (VDD=10) | VOL | 0 | 0.05 | Vdc | Vin = VDD or 0; VDD = 10 Vdc; max over -55C/25C/125C | 3 | |
| Output Voltage "0" Level (VDD=15) | VOL | 0 | 0.05 | Vdc | Vin = VDD or 0; VDD = 15 Vdc; max over -55C/25C/125C | 3 | |
| Output Voltage "1" Level (VDD=5.0) | VOH | 4.95 | 5 | Vdc | Vin = 0 or VDD; VDD = 5.0 Vdc; min over -55C/25C/125C | 3 | |
| Output Voltage "1" Level (VDD=10) | VOH | 9.95 | 10 | Vdc | Vin = 0 or VDD; VDD = 10 Vdc; min over -55C/25C/125C | 3 | |
| Output Voltage "1" Level (VDD=15) | VOH | 14.95 | 15 | Vdc | Vin = 0 or VDD; VDD = 15 Vdc; min over -55C/25C/125C | 3 | |
| Input Voltage "0" Level (VDD=5.0) | VIL | 2.25 | 1.5 | Vdc | VO = 4.5 or 0.5 Vdc; VDD = 5.0 Vdc; max over -55C/25C/125C | 3 | |
| Input Voltage "0" Level (VDD=10) | VIL | 4.5 | 3 | Vdc | VO = 9.0 or 1.0 Vdc; VDD = 10 Vdc; max over -55C/25C/125C | 3 | |
| Input Voltage "0" Level (VDD=15) | VIL | 6.75 | 4 | Vdc | VO = 13.5 or 1.5 Vdc; VDD = 15 Vdc; max over -55C/25C/125C | 3 | |
| Input Voltage "1" Level (VDD=5.0) | VIH | 3.5 | 2.75 | Vdc | VO = 0.5 or 4.5 Vdc; VDD = 5.0 Vdc; min over -55C/25C/125C | 3 | |
| Input Voltage "1" Level (VDD=10) | VIH | 7 | 5.5 | Vdc | VO = 1.0 or 9.0 Vdc; VDD = 10 Vdc; min over -55C/25C/125C | 3 | |
| Input Voltage "1" Level (VDD=15) | VIH | 11 | 8.25 | Vdc | VO = 1.5 or 13.5 Vdc; VDD = 15 Vdc; min over -55C/25C/125C | 3 | |
| Output Drive Current Source (Pins 4 & 5), VDD=5.0 | IOH | -0.7 | -1.7 | mAdc | VOH = 2.5 Vdc; Pins 4 & 5; min at 125C, typ at 25C | 3 | |
| Output Drive Current Source (Pins 4 & 5), VDD=5.0 | IOH | -0.14 | -0.36 | mAdc | VOH = 4.6 Vdc; Pins 4 & 5; min at 125C, typ at 25C | 3 | |
| Output Drive Current Source (Pins 4 & 5), VDD=10 | IOH | -0.35 | -0.9 | mAdc | VOH = 9.5 Vdc; Pins 4 & 5; min at 125C, typ at 25C | 3 | |
| Output Drive Current Source (Pins 4 & 5), VDD=15 | IOH | -1.1 | -3.5 | mAdc | VOH = 13.5 Vdc; Pins 4 & 5; min at 125C, typ at 25C | 3 | |
| Output Drive Current Source (Pin 13), VDD=5.0 | IOH | -1.7 | -4.2 | mAdc | VOH = 2.5 Vdc; Pin 13; min at 125C, typ at 25C | 3 | |
| Output Drive Current Source (Pin 13), VDD=5.0 | IOH | -0.36 | -0.88 | mAdc | VOH = 4.6 Vdc; Pin 13; min at 125C, typ at 25C | 3 | |
| Output Drive Current Source (Pin 13), VDD=10 | IOH | -0.9 | -2.25 | mAdc | VOH = 9.5 Vdc; Pin 13; min at 125C, typ at 25C | 3 | |
| Output Drive Current Source (Pin 13), VDD=15 | IOH | -2.4 | -8.8 | mAdc | VOH = 13.5 Vdc; Pin 13; min at 125C, typ at 25C | 3 | |
| Output Drive Current Sink (VDD=5.0) | IOL | 0.36 | 0.88 | mAdc | VOL = 0.4 Vdc; VDD = 5.0 Vdc; min at 125C, typ at 25C | 3 | |
| Output Drive Current Sink (VDD=10) | IOL | 0.9 | 2.25 | mAdc | VOL = 0.5 Vdc; VDD = 10 Vdc; min at 125C, typ at 25C | 3 | |
| Output Drive Current Sink (VDD=15) | IOL | 2.4 | 8.8 | mAdc | VOL = 1.5 Vdc; VDD = 15 Vdc; min at 125C, typ at 25C | 3 | |
| Input Current | Iin | -1 | 1e-05 | 1 | Adc | VDD = 15 Vdc; ±1.0 at 125C, ±0.1 at -55C and 25C | 3 |
| Input Capacitance | Cin | 5 | 7.5 | pF | Vin = 0 | 3 | |
| Quiescent Current (Per Package), VDD=5.0 | IDD | 0.01 | 150 | Adc | VDD = 5.0 Vdc; max at 125C (max is 5.0 at -55C and 25C); typ at 25C | 3 | |
| Quiescent Current (Per Package), VDD=10 | IDD | 0.02 | 300 | Adc | VDD = 10 Vdc; max at 125C (max is 10 at -55C and 25C); typ at 25C | 3 | |
| Quiescent Current (Per Package), VDD=15 | IDD | 0.03 | 600 | Adc | VDD = 15 Vdc; max at 125C (max is 20 at -55C and 25C); typ at 25C | 3 | |
| Output Rise and Fall Time (VDD=5.0) | tTLH, tTHL | 100 | 200 | ns | CL = 50 pF, TA = 25C; Pin 13 | 4 | |
| Output Rise and Fall Time (VDD=10) | tTLH, tTHL | 50 | 100 | ns | CL = 50 pF, TA = 25C; Pin 13 | 4 | |
| Output Rise and Fall Time (VDD=15) | tTLH, tTHL | 40 | 80 | ns | CL = 50 pF, TA = 25C; Pin 13 | 4 | |
| Propagation Delay Clock to Q1, 8-Bypass (Pin 6) High (VDD=5.0) | tPLH, tPHL | 1800 | 3600 | ns | CL = 50 pF, TA = 25C | 4 | |
| Propagation Delay Clock to Q1, 8-Bypass (Pin 6) High (VDD=10) | tPLH, tPHL | 650 | 1300 | ns | CL = 50 pF, TA = 25C | 4 | |
| Propagation Delay Clock to Q1, 8-Bypass (Pin 6) High (VDD=15) | tPLH, tPHL | 450 | 1000 | ns | CL = 50 pF, TA = 25C | 4 | |
| Propagation Delay Clock to Q1, 8-Bypass (Pin 6) Low (VDD=5.0) | tPLH, tPHL | 3.8 | 7.6 | s | CL = 50 pF, TA = 25C | 4 | |
| Propagation Delay Clock to Q1, 8-Bypass (Pin 6) Low (VDD=10) | tPLH, tPHL | 1.5 | 3 | s | CL = 50 pF, TA = 25C | 4 | |
| Propagation Delay Clock to Q1, 8-Bypass (Pin 6) Low (VDD=15) | tPLH, tPHL | 1.1 | 2.3 | s | CL = 50 pF, TA = 25C | 4 | |
| Propagation Delay Clock to Q16 (VDD=5.0) | tPHL, tPLH | 7 | 14 | s | CL = 50 pF, TA = 25C | 4 | |
| Propagation Delay Clock to Q16 (VDD=10) | tPHL, tPLH | 3 | 6 | s | CL = 50 pF, TA = 25C | 4 | |
| Propagation Delay Clock to Q16 (VDD=15) | tPHL, tPLH | 2.2 | 4.5 | s | CL = 50 pF, TA = 25C | 4 | |
| Propagation Delay Reset to Qn (VDD=5.0) | tPHL | 1500 | 3000 | ns | CL = 50 pF, TA = 25C | 4 | |
| Propagation Delay Reset to Qn (VDD=10) | tPHL | 600 | 1200 | ns | CL = 50 pF, TA = 25C | 4 | |
| Propagation Delay Reset to Qn (VDD=15) | tPHL | 450 | 900 | ns | CL = 50 pF, TA = 25C | 4 | |
| Clock Pulse Width (VDD=5.0) | tWH | 600 | 300 | ns | CL = 50 pF, TA = 25C | 4 | |
| Clock Pulse Width (VDD=10) | tWH | 200 | 100 | ns | CL = 50 pF, TA = 25C | 4 | |
| Clock Pulse Width (VDD=15) | tWH | 170 | 85 | ns | CL = 50 pF, TA = 25C | 4 | |
| Reset Pulse Width (VDD=5.0) | tWH | 1000 | 500 | ns | CL = 50 pF, TA = 25C | 4 | |
| Reset Pulse Width (VDD=10) | tWH | 400 | 200 | ns | CL = 50 pF, TA = 25C | 4 | |
| Reset Pulse Width (VDD=15) | tWH | 300 | 150 | ns | CL = 50 pF, TA = 25C | 4 | |
| DC Supply Voltage Range | VDD | -0.5 | 18 | V | Voltages referenced to VSS | 1 | |
| Input or Output Voltage Range (DC or Transient) | Vin, Vout | -0.5 | V | Max is VDD + 0.5 V (not numeric) | 1 | ||
| Input or Output Current (DC or Transient) per Pin | Iin, Iout | -10 | 10 | mA | Per pin; printed ±10 mA | 1 | |
| Power Dissipation per Package | PD | 500 | mW | Note 1 applies (D/DW derating -7.0 mW/C from 65C to 125C) | 1 | ||
| Ambient Temperature Range | TA | -55 | 125 | °C | 1 | ||
| Storage Temperature Range | Tstg | -65 | 150 | °C | 1 | ||
| Lead Temperature | TL | 260 | °C | 8-second soldering | 1 | ||
| Supply Voltage Range | VDD | 3 | 18 | Vdc | From Features list | 1 | |
| Mono-In timing resistor | RX | 5 | 100 | k | Pin 15 MONO-IN resistor to VDD for reliable operation | 5 | |
| Mono-In timing capacitor | CX | 1000 | pF | Pin 15 MONO-IN capacitor to VSS for reliable operation | 5 |
CAD (KiCad official)
- Symbol:
MC14536BDWG - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
mc14536bdwg-etched.step/mc14536bdwg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc14536bdwg.step/mc14536bdwg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (15 pp, sha256
8275d9a502a7e313, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).